颗粒增强复合材料热应力分析的双层嵌套模型

建立了一个把增强颗粒球和基体空心球嵌入等效复合介质空腔中的“双层嵌套模型”,研究了颗粒增强材料自高温冷却下来时,不同相中热应力的分布特点。推出了热应力在弹性和弹塑性状态的各种表达式。研究表明,随着温度降低,增强体受到压应力,基体材料中存在的静水应力为拉应力。温度继续下降,将出现自增强颗粒与基体界面向外扩展的屈服区。随增强相体积分数增大,增强颗粒受到的压应力和基体中的静水拉应力减小,增强颗粒与基体界面屈服的起始温差增大,而基体材料全面屈服的温差却减小。     

随机Benjamin-Ono 方程初值问题及对河口区域生物分布的应用

该文对具梯度耦合噪声的随机Benjamin-Ono 方程（以下简记为B-O方程）的初值问题导出了解得积分表达式，并将它应用于河口区域生物分布问题，得到了一维空间的分布表达式。     

对乙酰氨基酚与β-环糊精包合方法的研究

本文采用饱和水溶液和固体研磨两种方法制备对乙酰氨基酚与β-环糊精的包合物，将两种方法进行比较发现，两种包合方法均形成包合物，且最佳摩尔比为1：3。但从工艺角度和收率考虑，固体研磨法有很大的优势。     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

物理实验课程考核、评估体系初探

对物理实验课程考核、评估方法进行了探讨，提出了物理实验课程考核、评估体系及实施细则．重点介绍了体系中的核心部分——正规的物理实验课程考试．     

CCD光谱谱线标定方法研究

CCD作为光谱分析和测色仪器的光谱接收器件 ,光谱谱线定位受单色仪狭缝和CCD光敏元尺寸影响。提出采用最小二乘法做曲线拟合和质心法来确定光谱线在CCD上的精确定位 ,使光谱谱线的定位精度得到提高 ,并且不受CCD光敏元尺寸限制。实验结果表明 ,两种方法对光谱线的定位 ,具有重复性高 ,稳定性好等特点。在定位精度上 ,两者具有一致性。     

Homoclinic and Periodic Orbits Arising Near the Heteroclinic Cycle Connecting Saddle-focus and Saddle Under Reversible Condition

In this paper, we study the dynamical behavior for a 4-dimensional reversible system near its heteroclinic loop connecting a saddle-focus and a saddle. The existence of infinitely many reversible 1-homoclinic orbits to the saddle and 2-homoclinic orbits to the saddle-focus is shown. And it is also proved that, corresponding to each 1-homoclinic （resp. 2-homoclinic） orbit F, there is a spiral segment such that the associated orbits starting from the segment are all reversible 1-periodic （resp. 2-periodic） and accumulate onto F. Moreover, each 2-homoclinic orbit may be also accumulated by a sequence of reversible 4-homoclinic orbits.     

几种新型含氰废水净化剂的研制

用膨润土和高岭土为原料，讨论了膨润土吸附剂的改性方法，制备了系列含氰废水净化剂，进行了废水处理实验，测定了净化后水样含氰量，绘制了净化剂用量与CN^-去除率关系曲线。研究发现，经复合改性的膨润土净水效果最好。当投加1％的改性膨润土，CN^-去除率可达80％以上，并讨论了膨润土的结构与改性机理。为含CN^-离子废水处理提供了有价值的参考依据。     

NI-LAB虚拟组态控制实验室的研制

本文利用虚拟仪器技术,采用了LabVIEW图形编程环境,以数字可编程调节器为原型开发了一套虚拟组态控制实验室,介绍了系统实现的功能、基本组成、软件的设计思想和设计方法以及硬件的选取使用,最后给出具体的演示实例,结果表明,LabVIEW以其强大的硬件驱动、图形显示能力和便捷的快速程序设计为过程控制提供了优秀的解决方案.     

各向同性湍流中颗粒引起湍流变动的直接模拟

本文通过直接数值模拟对均匀各向同性湍流中颗粒对湍流的变动作用进行了研究.颗粒相的体积分数很小而质量载荷足够大,以至于颗粒之间的相互作用可以忽略不计,而重点考虑颗粒与湍流间能量的交换。颗粒对湍流的反向作用使得湍动能的耗散率增强,以至于湍动能的衰减速率增大.湍动能的衰减速率随颗粒惯性的增大而增大。三维湍动能谱显示,颗粒对湍动能的影响在不同的尺度上是不均匀的。在低波数段,流体带动颗粒,而高波数段则相反.