自动固相萃取-液相色谱-串联质谱法同时测定血液中5种抗抑郁类药物

建立了血液中5种抗抑郁类药物的自动固相萃取-液相色谱-串联质谱(ASPE-LC-MS/MS)分析方法。样品经HLB固相萃取柱提取后,采用LC-MS/MS进行测定,外标法定量。在Waters AtlantisTM dC18反相柱上分离,梯度洗脱,流动相为甲醇-0.1%甲酸(1∶4,V/V)溶液,质谱采集为电喷雾正离子多反应监测模式。采用基质匹配标准溶液校正,5种目标物在1~500μg/L范围内具有良好的线性关系,相关系数(R)大于0.9975,检出限在0.1~0.6μg/L之间;添加浓度水平为10,100和500μg/L时,方法回收率为70.6%~93.8%,相对标准偏差在3.9%~9.2%之间。本方法可用于血液中5种抗抑郁类药物的法庭与临床毒物分析。     

Effects of Additives on Lipase Immobilization in Microemulsion-Based Organogels

An inexpensive, facile, and environmentally benign method was developed to improve the activity and stability of Candida rugosa lipase (triacylglycerol acylhydrolase) immobilized on microemulsion-based organogels (CRL MBGs) via the addition of additives during immobilization. The additives used were polyethylene glycol (PEG) or polysaccharides. This study is the first report on the effect of additives in CRL MBGs. Among the tested additives, PEG produced the most improvement in the immobilized CRL, enhancing its stability in organic solvents (specifically polar solvents). The results of circular dichroism and fluorescence spectra experiments indicated that exposure of the acidic CRL to electronegative additives in the buffer, such as polyethylenimine and the electropositive surfactant cetyltrimethylammonium bromide, may change the lipase secondary structure, ultimately causing enzyme inactivation. However, sodium bis(2-ethylhexyl)sulfosuccinate and PEG 2000 had minimal effects on the secondary structure of CRL. The CRL MBGs containing PEG 2000 demonstrated remarkable retention of their catalytic activity during the recycling test. No significant changes in enzymatic activity were observed, even after nine runs, and 90 % of the original yield was maintained after 15 cycles.     

微波消解-电感耦合等离子质谱法测定龟甲胶中6种有害元素

龟甲胶样品经微波消解后,采用电感耦合等离子质谱(ICP-MS)测定龟甲胶中砷、铅、铬、镉、铜、汞6种有害元素,其中砷用碰撞室技术(CCT)测定,6种元素的检测限范围为0.009~0.036ng/mL,样品加标回收率为85.1%~113.6%,相对标准偏差小于10%。该法简便、快速,可用于龟甲胶中上述6种有害元素的检测。     

Atomic-Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic-scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3−δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy-dispersive X-ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.     

Impact of titanate coupling agent on properties of high density polyethylene composite filled with coal gangue

In this study, surface modification of coal gangue (CG) was performed with titanate coupling agent 201 (isopropyl tri(dioctylpyrophosphate) titanate), and the effects of surface modifier on mechanical properties and thermal stability of high-density polyethylene filled with CG (HDPE/CG) and high-density polyethylene filled with modified CG (HDPE/mCG) composites were investigated. The coupling agent was successfully grafted on CG surface through chemical reaction according to the analyses of Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), and the coupling agent can effectively enhance the hydrophobicity of surface that was verified by water contact angle beyond 90° of modified CG sample. With the introduction of coupling agent, some enhancements of tensile strength, flexural strength, and impact strength were observed in HDPE/mCG compared with HDPE/CG, due to the improved compatibility between mCG fillers and matrix. The increased storage modulus and decreased loss factor of HDPE/mCG composite further confirm the stronger interface adhesion after modification. Moreover, it is found that titanate coupling agent 201 can improve the thermal stability of HDPE/mCG composite to some extent.     

ZnCl2、KOH和HNO3改性MWCNT对苯酚的吸附行为研究

通过扫描电子显微镜、X射线衍射仪、N₂吸附分析仪及Boehm滴定法获得ZnCl₂、KOH和HNO₃化学处理对高纯多壁碳纳米管的结构和表面含氧官能团的影响,通过批处理实验考察吸附条件（吸附时间、初始浓度、温度）对处理前后的碳纳米管吸附苯酚行为的影响,并采用准一级、准二级、Evolich动力学模型和热力学方程拟合其吸附数据,分析其动力学行为、热力学行为和吸附机理。结果表明,虽然ZnCl₂、KOH和HNO₃化学处理法均未对碳纳米管BET比表面积产生显著影响,但会影响其表面化学性质（即,对于ZnCl₂和KOH化学处理降低表面羧基、内酯基含量和增大碱性官能团量,而对于HNO₃化学处理可以增大表面羧基、内酯基含量,而碱性官能团略有增加）;改性处理影响碳纳米管去除苯酚效率：由于ZnCl₂和KOH改性处理降低碳纳米管表面羧基量,故其提高了苯酚去除率,而HNO₃处理则略减小碳纳米管的苯酚去除率,可能是由于碳纳米管结构和表面化学性质共同影响所致;碳纳米管的苯酚去除率均随苯酚溶液初始浓度的增大而减小;高温不利于吸附;热力学研究发现碳纳米管吸附苯酚过程是自发的和放热的,属于物理吸附;动力学研究表明,吸附过程符合准二级动力学方程。通过ZnCl₂和KOH化学处理,可以显著提高碳纳米管对苯酚的吸附性能。     

Large-Scale Synthesis of MOF-Derived Superporous Carbon Aerogels with Extraordinary Adsorption Capacity for Organic Solvents

Carbon aerogels (CAs) with 3D interconnected networks hold promise for application in areas such as pollutant treatment, energy storage, and electrocatalysis. In spite of this, it remains challenging to synthesize high-performance CAs on a large scale in a simple and sustainable manner. We report an eco-friendly method for the scalable synthesis of ultralight and superporous CAs by using cheap and widely available agarose (AG) biomass as the carbon precursor. Zeolitic imidazolate framework-8 (ZIF-8) with high porosity is introduced into the AG aerogels to increase the specific surface area and enable heteroatom doping. After pyrolysis under inert atmosphere, the ZIF-8/AG-derived nitrogen-doped CAs show a highly interconnected porous mazelike structure with a low density of 24 mg cm⁻³, a high specific surface area of 516 m² g⁻¹, and a large pore volume of 0.58 cm⁻³ g⁻¹. The resulting CAs exhibit significant potential for application in the adsorption of organic pollutants.     

两种形貌纳米Fe2O3对TKX-50热分解的催化性能研究

Energy components used in solid rocket propellants are beneficial for improving the energy performance, and their thermal decomposition characteristics significantly affect the combustion properties of the propellants. As a kind of energetic material with both high energy and low sensitivity (impact and friction), 5, 5'-bistetrazole-1, 1'-diolate (TKX-50) can effectively improve the energy and safety characteristics of solid propellants. Burning catalyst is another important component of solid propellants, which can significantly improve the burning rate of the propellant and reduce the pressure exponent. Among various burning catalysts, nanoscale transition metal oxides can promote the thermal decomposition of the energetic component, thus enhancing the combustion properties of the solid propellant. However, the catalytic effects of nanoscale transition metal oxides with different morphologies on the thermal decomposition of TKX-50 have rarely been studied. Based on the excellent catalytic activity of Fe₂O₃ for TKX-50 thermal decomposition, nano-Fe₂O₃ particles with spherical and tubular microstructures were used for TKX-50 thermal decomposition. The Fe₂O₃ nanoparticles were successfully fabricated via the solvothermal method and characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses. The XRD, FT-IR, and XPS results confirmed the successful fabrication of spherical and tubular Fe₂O₃ samples. The SEM and TEM images showed that the spherical Fe₂O₃ samples are composed of agglomerated Fe₂O₃ nanoparticles with an average particle size of 110 nm. In addition, the average diameter and length of hollow tubular Fe₂O₃ nanoparticles are 120 nm and 200 nm, respectively. The catalytic activities of spherical and tubular Fe₂O₃ for TKX-50 decomposition were studied by thermogravimetric analysis (TG) and differential scanning calorimetry (DSC) methods. The DSC and TG-DTG curves showed that both tubular and spherical Fe₂O₃ could effectively promote TKX-50 thermal decomposition. The first thermal decomposition peak temperature (T_FDP) of TKX-50 was reduced by 36.5 K and 26.3 K in the presence of tubular and spherical Fe₂O₃, respectively, at 10 K·min⁻¹. The activation energy (E_a) of TKX-50, determined by the iso-conversional method, was significantly reduced in the presence of both tubular and spherical Fe₂O₃. The results indicated that the microstructure of the catalyst has a significant effect on its catalytic performance for TKX-50 thermal decomposition, and that tubular Fe₂O₃ with hollow microstructure possesses better catalytic activity than spherical Fe₂O₃. The excellent catalytic activity of tubular Fe₂O₃ can be attributed to the hollow microstructure, which has more active sites for TKX-50 thermal decomposition.     

Qualitative and quantitative analyses of aloe-emodin,rhein, and emodin in qi yin granules by high-performance thin-layer chromatography

The aim of this study was to perform qualitative and quantitative analyses of aloe-emodin, rhein, and emodin in three prepared samples of compound qi yin granules by high-performance thin-layer chromatography (HPTLC) and to establish an analytical method. TLC was used to qualitatively analyze the three major components of the compound: aloe-emodin, rhein, and emodin. HPTLC was performed to determine the contents of the three components. HPTLC analysis showed that using Anhui Liangchen high-efficiency silica gel G plate was the optimal stationary phase and the upper layer solution of a petroleum ether–ethyl acetate–formic acid (15.5:5:1, V/V) mixed solution was the optimal developing agent. The composition of the samples for testing was basically the same, but the content was different. In summary, this study used HPTLC to qualitatively and quantitatively analyze aloe-emodin, rhein, and emodin in compound qi yin granules. It can lay the foundation for improving the quality control and standards of compound qi yin granules.

     

碳量子点在八面双锥和纳米片TiO2上的光催化

依次用溶剂热法和水热法制备得到暴露(101)晶面的八面双锥体二氧化钛OBP-TiO2和不同碳负载量的N-CDs/OBP-TiO2复合催化剂,以及暴露(001)晶面的纳米片二氧化钛TNS和不同碳负载量的N-CDs/TNS复合催化剂。利用TEM、XRD、XPS等表征手段对这2类复合催化剂的形貌结构、化学成分等作了鉴定。系统研究了碳量子点负载量对可见光降解RhB的光催化性能影响。实验发现,由于N-CDs的加入,均能较大提高2类复合催化剂的光催化性能。(101)高裸露晶面N-CDs/OBP-TiO2比(001)高裸露晶面N-CDs/TNS的光催化活性高。