Chiral Salen Manganese Complex Immobilized on SBA-15： A New Heterogenized Enantioselective Catalyst for the Epoxidation of Alkenes

Jacobsen‘s catalyst was immobilized onto SBA-15 by multi-step grafting, and this heterogenized catalyst exhibited comparable catalytic performance with the corresponding homogeneous counterpart for the epoxidation of alkenes, and the catalyst could be recycled effectively several times.     

乙酰丙酮稀土四苯基卟啉配合物的电化学研究

本文指出我国环境保护产业发展中存在的问题，论述了“入关“对我国环境保护产业的影响及应采取的经济和税收政策。     

取向聚对苯二甲酸乙二酯纤维的非等温结晶动力学

取向聚对苯二甲酸乙二酯纤维的非等温结晶动力学张志英，赵家森（天津纺织工学院材料科学系天津３００１６０）关键词取向高聚物，聚对苯二甲酸乙二酯，非等温结晶，结晶动力学研究高聚物结晶动力学常用的等温方法有光透射法、密度法、显微镜法、Ｘ－射线衍射法、差示扫描...     

网间交联型增韧环氧树脂/蓖麻油聚氨酯互穿网络聚合物的动态力学性能和形态结构

以增韧环氧树脂(TEP)和蓖麻油聚氨酯[PU(CO)]形成的互穿网络聚合物(IPN),两网络间具有一定数量的交联点,在一定组成下,该IPN的tanδ-T曲线半峰宽达100℃,tanδ最大值接近1,阻尼性能良好。形态研究表明,该IPN既有增韧环氧树脂本身的两相结构,又有IPN的两相结构。     

溶剂热还原合成Cr2O3纳米管(英)

Cr₂O₃ nanotubes with diameters of 80 nm and lengths of 550 nm were synthesized in a solvothermal reduction system at 180 ℃. The acetyl acetone (AcAc) and ethylene glycol (EG) were used as the chelate agent and the reductant respectively in the system. An intermediate compound-Cr(Ⅲ)(C₅H₇O₂)₃ was formed to force Cr₂O₃to crystallize along one direction.     

氧化铽团簇的表面修饰及对其荧光特性影响的研究

采用脉冲激光轰击浸于流动相中的氧化铽固体靶，考察了流动相及其流速、脉冲激光输出功率、修饰剂、添加修饰剂顺序等对所获得的氧化铽有机溶胶荧光性能的影响。UV-Vis和荧光光谱的测试表明：以含有修饰剂的无水乙醇作为流动相，可得到良好荧光性能的氧化铽乙醇溶胶，而环己酮与醋酸乙酯均不适合作为该体系的流动相;最佳流速为0.15 mL·s^-1；脉冲激光输出功率大有利于其荧光性能；最佳修饰剂为乙酰丙酮(acac)和2，2′-联吡啶(2，2′-bipy)，且应原位修饰。     

Y2O2S∶Eu3+,Mg2+,Ti4+长余辉材料制备中烧结条件和助熔剂的影响

Y2O2S∶Eu3+;Mg2+;Ti4+长余辉材料制备中烧结条件和助熔剂的影响;Y2O2S∶Eu3+;Mg2+;Ti4+; 烧结条件; 助熔剂; 发光性质     

高强度高电导率聚乙炔的合成——醚类溶剂的结构对性能的影响

通过选用不同醚类结构做溶剂加热回流Ti(OBu)_4-AIEt_3催化剂,并采用非溶剂聚合方法进行乙炔聚合发现,所得HPPA膜的强度和电导率都有了较大提高。其中直链醚制得的PA膜强度(抗张强度大于100MPa)和空气稳定性比用环醚得到的PA膜高得多,但用前者时的乙炔聚合速率远低于后者。两体系得到的HPPA膜的碘掺杂电导率值相近(～10~3S/cm),拉伸后可达10~4S/cm量级。SEM、TEM及IR光谱的结果表明,不同醚制得的PA膜的纤维束直径及顺式含量有较大差别。     

INFLUENCE OF COMPOSITIONAL HETEROGENEITY ON MORPHOLOGY AND PROPERTIES OF SEGMENTED COPOLYMERS

Polyethylene terephthalate(PET)/polycaprolactone(PCL) segmented copolymers with different hard segment contents and a blend of two of them were studied by using DSC, WAXS, TEM and IR techniques and dynamic mechanical, stress-strain and isothermal crystallization measurements. Emphasis was laid on the studies of influence of compositional heterogeneity on the morphology and properties of these segmented copolymers. It was found that the solution cast specimens of the more heterogeneous sample exhibit better segregation of segments, high crystallinity and melting temperature. They have higher thermal stability of mechanical properties at small deformations. However, they are less stable against large deformations and may become softer than the more homogeneous ones.