~3Δ、~3Π、~3Σ~＋Ni—CO分子簇的从头算研究

用从头算研究了ｄ空穴位置不同对Ｎｉ—ＣＯ成键机制的影响。结果表明，Ｎｉ—ＣＯ键中σ／π接受作用的相对强弱，取决于Ｎｉ—ＣＯ簇所处的能态。σ空间电子云较π空间电子云弥散，因而Ｎｉ—ＣＯ簇的稳定性与σ空间电子云的排斥密切相关。随着Ｎｉ４ｐσ轨道上电子占据数的增加，Ｎｉ—ＣＯ稳定性减弱。比较了分子簇Ｎｉ—ＣＯ与ＮｉＣＯ分子及ＣＯ／Ｎｉ化学吸附体系之间的性质。     

聚苯乙烯，聚甲基丙烯酸甲酯对聚氯乙烯／氯化聚乙烯共混体流变性的影响

PVC/CPE blend modified by rigid particles has good combined properties. In this paper, the effeCts of rigid particles (PMMA. PS. CaCO,) on the rheological behavior of PVC/ CPE systems were studied. The results showed that the apparent viscosity (aha) were decreased, extrusion surface smooth and Newtonian fluidity were slightly improved by filling a little amount of rigid ploymers (PS. PMMA) to PVC/CPE blends. The fluid activition energy (E,). Newtonian fluidity. extrusion surface smooth and ba of PVC/CPE blends were increased by filling CaCO₃ and die swelling ratio was decreased.The newtonian fluidity. En and ηa of PVC/CPE/CaCO₃ blends can be decreased by filling rigid polymers,and good extrusion surface smooth and low die swelling ratio unchanged.     

草酸电还原制取乙醛酸的研究

研究了由草酸电解还原制备乙醛酸时，温度、草酸纯度、电解时间、电极状态和电解产物对电流效率和产率的影响。实验发现，除温度和原料纯度是重要的影响因素外，电极表面的有机物吸附和电解产物－乙醛酸的浓度具有更大的影响。     

表面修饰纳米CdS制备中两个重要影响因素及结构表征

利用溶胶-凝胶法制备了PVP表面修饰的CdS纳米晶粒。考察了影响纳米CdS制备的两个重要因素Cd²⁺/S^2-和PVP,及其作用机理。确证表面过剩S^2-和PVP在反应体系中的作用是在较高浓度下制备纳米CdS的两个重要因素,进一步确定了PVP的最佳用量。通过TEM、ED、XRD、FT-IR等手段对合成的纳米粒子进行了结构表征,最小粒径为7～10nm,闪锌矿构型,粒子大小及形貌可通过改变Cd²⁺/S^2-及反应物浓度来控制。最后给出了CdS/PVP纳米晶粒的结构模型。     

含叔胺基功能性单体的聚合研究——ⅩⅤⅠ.含吗啉基聚丙烯酸酯类及其水凝胶的温度敏感性

我们曾报道过含吗啉基丙烯酰类单体在过氧化物或芳酮存在下的热聚合及光聚合,以及做为氧化-还原引发体系组分引发烯类单体聚合的研究。利用这类单体与过硫酸盐所构成的引发体系可以获得分子量达千万的聚丙烯酰胺。实验中还发现某些含吗啉基的丙烯酸酯类聚合物的水溶液及其水凝胶具有温度敏感性。本文合成了以下四种含吗啉基丙烯酸酯类单体:     

原子簇P12（D3d）的理论研究

利用Ｇａｕｓｓｉａｎ－９２程序在６－３１Ｇ基组下优化Ｐ１２（Ｄ３ｄ）构型，研究了３Ｐ４（Ｔｄ）→Ｐ１２（Ｄ３ｄ）的相对能量，计算结果为△Ｅ＝Ｅｐ１２（Ｄ３ｄ）－３Ｅｐ４（Ｔｄ）＝－７９．８４４ｋＪ／ｍｏｌ，优化Ｐ１２（Ｄ３ｄ）获得的Ｐ－Ｐ键键长接近于实验测得的Ｐ－Ｐ单键键长，并进一步在该基组下计算了Ｐ１２（Ｄ３ｄ）原子簇的振动频率，得到的全部为正频率，表明原子簇Ｐ１２的Ｄ３ｄ构型是位能面上的稳定点     

广义簇合物在均匀几率密度场下的生长

通过对广义簇合物生长的自调整模型的解析,得出了粒子在均匀几率密度场下簇合物生长形态的变化特征,揭示了表征其生长形态结构分式维数D的物理意义,同时考查了格子模型对簇合物生长形态的影响以及自调整模型的动力学行为。     

STUDIES ON PREPARATION OF INACTIVATED VACCINES FROM CELL CULTURES OF MINK ENTERITIS VIRUS (MEV) AND THEIR IMMUNITY

In this paper, superhigh reproductive rate strains of MEV with titre more than HA8192* or TCID50 log9.7 10 have been achieved both by cultivation in cell lines with different susceptibility to MEV and by isolating and identifying in field by the author. The systematic tests proved that S18 and L12 strains of MEV are the best strains for vaccine preparation. In this study, the best means for the tissue cultivation of MEV and the most advanced technological process for the production and detection of serum-free cell-cultured MEV fluids with super-high HA titre in batches in large quantities have been established for the first time. Optimum conditions for MEV inactivation were determined, and safe and effective inactivated vaccines with mineral oil or A1(OH)3 gel adjuvant were successfully prepared with serum-free cell-cultured MEV fluids. Both vaccines with different adjuvants can be manufactured in batches in large quantities and have been widely used all over China since 1986. The change laws of the imm     

A Novel Green Synthesis of Quinolines through Acid-catalyzed Friedlander Reaction in Ionic Liquids

Quinoline derivatives were efficiently prepared through acid-catalyzed Friedlander reaction in ionic liquid ([bmim] [BF4]). It is shown that the proposed method is operationally simple and environmentally benign in that the reaction media and the catalyst can be recovered and be reused effectively for at least four times.     

Synthesis and Structural Characterization of a Polyoxomolybdate HNa_7[Mo_(36)O_(112)(H_2O)_(16)]·47H_2O

A new polyoxomolybdate complex HNa7[Mo36O112(H2O)16]·47H2O 1 has been prepared in the beaker solution and characterized by single-crystal X-ray diffraction and elemental analyses. Crystal data: H127Mo36Na7O175, Mr = 6542.79, monoclinic, C2/c, a = 40.891(6), b = 17.900(3), c = 25.580(4) , β = 125.673(2)°, V = 15210(4) 3, Z = 4, Dc = 2.857 g/cm3, F(000) = 12464, μ = 3.013 mm-1, R = 0.0633 and wR = 0.1654 (I > 2σ(I)). With the bridging sodium cations, the [Mo36O112(H2O)16]8- units in compound 1 are linked to form a one-dimensional structure, on the basis of which a three-dimensional architecture is further constructed via other sodium cations and complicated hydrogen bonds.