后交联型St-DVB大孔吸附树脂对低级醇类的吸附性能研究

分别在静态和动态条件下研究了Friedel—Crafs后交联型聚苯乙烯-二乙烯基苯(St-DVB)大孔吸附树脂对水溶液中多种低级一元醇的吸附性能，测定静态吸附等温线和动态吸附曲线，并分别按照Langmuir和Freundlich模型进行拟合．结果显示，树脂对水中低浓度低级一元醇的吸附过程属于放热的物理吸附过程，树脂吸附能力随着一元醇碳原子数的增加，即分子内疏水基团质量的增加而增加；树脂对直链醇的吸附能力稍强于同分异构的支链醇．     

LC–MS Determination and Pharmacokinetic Study of a Novel Sulfonylurea: Potential Hypoglycemic Agent in Rat Plasma

To support preclinical pharmacokinetic investigation of 1-[4-[2-(4-bromobenzene-sulfonaminoethyl)phenylsufonyl]-3-(trans-4-methylcyclohexyl)urea (G004), a rapid, sensitive and specific high-performance liquid chromatography–electrospray ionization mass spectrometry (LC–ESI-MS) method was developed and validated. Glibenclamide was employed as internal standard. After liquid–liquid extraction the analyte was analyzed on a Kromasil C₁₈ column (150 × 2.0 mm i.d.) with a mobile phase consisted of acetonitrile–water (0.05% acetic acid), 30:70 (v/v). The flow rate was 0.2 mL min⁻¹. Detection was performed on a quadrupole mass spectrometer using an electrospray ionization interface and the selected-ion monitoring (SIM) mode. The retention time was about 3.5 and 4.2 min for Glibenclamide and G004, respectively. The assay was linear over the concentration range of 2.0–500.0 ng mL⁻¹. Extraction Recovery of G004 in rat plasma was more than 87%. The intra- and inter-assay precision was lower than 11.5% (CV). This validated method was successfully applied to the pharmacokinetics of G004 in rats.     

基于改进断裂点理论的机场吸引范围界定

合理界定机场吸引范围,是构建坚固民航运输网络的关键环节。现有的机场吸引范围界定方法,很少考虑与其衔接的地面交通网络,以及旅客出行偏好的影响。为提高机场吸引范围的实用性,本文以城市断裂点理论为基础,对其中的重要参数予以改进。首先,以综合交通运输为背景,指出发达的公路和铁路运输网络对民用机场具有很大的竞争与促进作用,并提出以地面交通出行时间为量化标准的吸引范围界定方法。然后,为分析旅客出行偏好的行为机理,针对于与机场衔接的地面交通网络来建立离散选择模型。其次,将研究区域的机场所在城市看作是一个整体,运用专家评价法和熵权法综合确定机场的吸引规模,并通过机场吞吐量与城市对外出行总量针对机场规模进行修正。最后,通过算例验证改进模型的实际可操作性,为确定多机场系统吸引范围界定提供新的思路和方法。     

IRS辅助的MISO-SWIPT安全速率最大化算法

为增强系统的稳定性,基于智能反射面（intelligent reflection surface,IRS）辅助安全通信,为用户采用功率分配架构的无线携能传输（simultaneous wireless information and power transfer,SWIPT）技术以提高用户安全速率并降低用户的能量消耗,建立了系统安全速率最大化的目标函数模型;考虑IRS相移约束、基站最大发射功率、功率分配比率约束和用户最低能量采集约束,提出了一种基于交替优化的安全速率最大化算法。利用连续凸近似算法,将目标函数转化为凸的形式;采用交替优化,对耦合变量进行解耦处理;提出一种波束赋形算法以实现安全速率最大化。仿真表明,提出的算法能够有效提升IRS辅助的SWIPT系统的安全速率,至少比其他算法提高了2.63bps/Hz。     

A Comparative Study on the Failure Criteria for Predicting the Damage Initiation in Fiber-Reinforced Composites

Mechanics of Composite Materials - In this research, the maximum stress, Hashin, Puck, LaRC03, and Northwestern University (NU) criteria are analyzed based literature data, analytical results...     

Effects of hydraulic pressure on the stability and transition of wetting modes of superhydrophobic surfaces

The underlying mechanisms of stability, metastability, or instability of the Cassie-Baxter and Wenzel wetting modes and their transitions on superhydrophobic surfaces decorated with periodic micropillars are quantitatively studied in this article. Hydraulic pressure, which may be generated by the water-air interfacial tension of water droplets or external factors such as raining impact, is shown to be a key to understanding these mechanisms. A detailed transition process driven by increasing hydraulic pressure is numerically simulated. The maximum sustainable or critical pressure of the Cassie-Baxter wetting state on a pillarlike microstructural surface is formulated for the first time in a simple, unified, and precise form. This analytic result reveals the fact that reducing the microstructural scales (e.g., the pillars' diameters and spacing) is probably the most efficient measure needed to enlarge the critical pressure significantly. We also introduce a dimensionless parameter, the pillar slenderness ratio, to characterize the stability of either the Cassie-Baxter or the Wenzel wetting state and show that the energy barrier for transitioning from the Cassie-Baxter to the Wenzel wetting mode is proportional to both the slenderness ratio and the area fraction. Thus, the Cassie-Baxter wetting mode may collapse under a hydraulic pressure lower than the critical one if the slenderness ratio is improperly small. This quantitative study explains fairly well some experimental observations of contact angles that can be modeled by neither Wenzel nor Cassie-Baxter contact angles and eventually leads to our proposals for a mixed (or coexisting) wetting mode.     

Luminescence centers in porous silicon

Photoluminescence studies on porous silicon show that there are luminescence centers present in the surface states. By taking photoluminescence spectra of porous silicon with respect to temperature, a distinct peak can be observed in the temperature range 100–150 K. Both linear and nonlinear relationships were observed between excitation laser power and the photoluminescence intensity within this temperature range. In addition, there was a tendency for the photoluminescence peak to red shift at low temperature as well as at low excitation power. This is interpreted as indicating that the lower energy transition becomes dominant at low temperature and excitation power. The presence of these luminescence centers can be explained in terms of porous silicon as a mixture of silicon clusters and wires in which quantum confinement along with surface passivation would cause a mixing of andX band structure between the surface states and the bulk. This mixing would allow the formation of luminescence centers.     

Optical spectra of an intracavity two-photon medium with sequeezed inputs

We consider an ensemble of three-level configuration atoms in an optical cavity, interacting through two-photon transitions with a cavity mode, driven by a broad-band squeezed input of finite amplitude. The atom-cavity system is coupled to reservoirs to describe the losses of the atoms and the cavity. Optical spectra in the transmitted and the reflected field are calculated and analysed in the good cavity limit, for the purely absorptive resonant case and the general case, respectively.