Dependence of Crystal Quality and β Value on Synthesis Temperature in Growing Gem Diamond Crystals

High quality Ib gem diamond single crystals were synthesized in cubic anvil high-pressure apparatus （SPD- 6 × 1200） under 5.4GPa and 1230℃-1280℃. The （100） face of seed crystal was used as growth face, and Ni70Mn25Co5 alloy was used as solvent/catalyst. The dependence of crystal quality andβ value （the ratio of height to diameter of diamond crystal） on synthesis temperature was studied. When the synthesis temperature is between 1230℃ and 1280℃, theβ value of the synthetic high-quality gem diamond crystals is between 0.4 and 0.6. The results show that when theβ value is between 0.4 and O. 45, the synthetic diamonds are sheet-shape crystals; however, when theβ value is between 0.45 and 0.6, the synthetic diamonds are tower-shape crystals. In addition, when theβ value is less than 0.4, skeleton crystals will appear. When theβ value is more than 0.6, most of the synthetic diamond crystals are inferior crystals.     

（Na0.52K0.44Li0.04）Nb0.9-xSbxTa0.1O3 Lead-Free Piezoelectric Ceramics with High Performance and High Curie Temperature

（Na0.52K0.44Li0.04）Nb0.9-x Sbx Ta0.1O3 lead-free piezoelectric ceramics are prepared by a solid-state reaction method. With increasing Sb content, the transition temperature from orthorhombic to tetragonal polymorphic phase decreased. A composition （Na0.52K0.44Li0.04）Nb0.863Sb0.037Ta0.1O3 is found to possess excellent piezo- electric and electromechanical performances （d33 = 306pC/N, kp =48%, and kt=50%）, and high Curie temperature （Tc = 320 ℃）. These results indicate that （Na0.52K0.44Li0.04）Nb0.863Sb0.037 Ta0.1O3 is a promising lead-free piezoceramics replacement for lead zirconate titanate.     

Symmetric Telecloning and Entanglement Distribution of Spin Quantum States

We propose a physical realization of symmetric telecloning machine for spin quantum states. The concept of area average fidelity is introduced to describe the telecloning quality. It is indicated that for certain input states this quantity may come to an enough high level to satisfy the need of quantum information processing. We also study the properties of entanglement distribution via the spin chain for arbitrary two-qubit entangled pure states as inputs and find that the decay ratio of entanglement for the output states is only determined by the parameters of spin chain and waiting time, independent of the initial input states.     

Effects of Li Substitution and Sintering Temperature on Properties of Bi0.5（Na,K）0.5TiO3 Lead-Free Piezoelectric Ceramics

Bi0.5 （Na0.72K0.28- x Lix ）0.5 TiO3 （BNKLT- 100x） lead-free piezoelectric ceramics are synthesized by conventional solid state sintering techniques. The dielectric and piezoelectric properties of the BNKLT-100x ceramics as a function of Li content are systematically investigated. It is found that not only Li content but also the sintering temperature has a strong effect on the piezoelectric properties of BNKLT. The piezoelectric constant d33 Of BNKLT varies from 120 to 252pC/N in the Li content range from 0.03 to 0.16. In the sintering temperature range from 1080 to 1130℃, the d33 value of BNKLT-6 changes from 200pC/N to 252pC/N. The BNKLT-6 sample sintered at 1100℃ has the highest piezoelectric constant d33 of 252pC/N, with the electromechanical coupling factors kp of 0.32 and kt of 0.44.     

退火对Pb辐照Al2O3单晶发光特性的影响

研究了230MeV的²⁰⁸Pb²⁷⁺辐照Al₂O₃样品及随后在600,900,1100K高温条件下退火后的光致发光特性。从辐照样品的测试结果可以清楚地看到在波长为390,450nm处出现了强的发光峰。辐照量为1×10¹³ions/cm²时,样品的发光峰最强。经过600K退火2h后测试结果显示,380nm发光峰剧烈增强,而其他发光峰显示不明显。在900K退火条件下,380nm的发光峰开始减弱,而在360,510nm出现了明显的发光峰,至到1100K退火完毕后380nm的发光峰完全消失,而360,510nm的发光峰相对增强。从被辐照样品的FTIR谱中看到,波数在460~510cm^-1间的吸收是振动模式,经过离子辐照后,吸收带展宽,随着辐照量的增大,Al₂O₃振动吸收峰消失,说明Al₂O₃振动模式被完全破坏。1000~1300cm^-1之间为Al—O—Al桥氧的伸缩振动模式,辐照后吸收带向高波数方向移动,说明其振动模式受到影响。辐照剂量较小的样品,损伤程度相对较低,经退火晶化后,振动模式基本恢复到单晶状态;辐照剂量较高的样品,损伤程度大,退火处理后表面变得较粗糙,振动模式并未出现,说明结构破坏严重。     

椭圆型保偏光纤耦合器的研制

保偏光纤耦合器是干涉仪和光纤陀螺仪的关键器件。介绍了用匹配型椭圆包层保偏光纤制作保偏光纤耦合器的工艺流程、测试结果以及分光比随温度的变化情况。试验结果表明,保偏光纤耦合器的综合性能指标,尤其是附加损耗和温度性能达到了国内领先水平。     

采用罗戈夫斯基线圈诊断径向束流

 罗戈夫斯基线圈具有结构简单、高频特性好等特点而被广泛应用于脉冲电流测量。提出了用两个自积分式罗戈夫斯基线圈诊断径向束流的方法,在此基础上设计了两个用于径向束流诊断的自积分式罗戈夫斯基线圈,对其进行了标定。当标准电流的上升沿为30 ns时,罗氏线圈响应时间约为10 ns;整个系统的测量误差约为4.7%。从标定结果来看,该系统的频率响应特性和测量精度能够满足ns级束流诊断的要求,该方法可以用于径向结构高功率微波器件的束流强度测量。     

垂直微结构湍流剖面仪速度分析与控制

湍流剖面仪的下潜速度是进行湍流观测时需要重点考虑的一个参数。根据湍流剪切数据测量原理,分析下潜速度对测量结果的影响,确定下潜速度的合理范围。受力平衡条件下,湍流仪的下潜速度由仪器净重和阻力系数决定。影响整体阻力系数的因素有3个,即3个阻力分量:主体结构的冲击阻力、黏滞阻力和阻尼刷的阻力。采用理论公式与经验公式相结合,分别计算3个阻力对应的阻力系数。根据下潜速度函数,给出速度配置的方法及应该注意的事项。仪器完成后进行下潜速度配置试验,将理论计算结果和试验结果进行比较分析,验证理论计算结果的准确性。     

可持续城市设计的内涵、原则与维度

 可持续发展是世界范围内各国城市发展建设的基本共识，以可持续发展理论内涵为基础，通过分析可持续发展理论的研究进程和城市建设面临的困境，融合生态、绿色概念，总结出可持续城市设计的基本概念与原则，从生态环境、历史文化、空间形态、管控治理4个维度，提出具有实效性的可持续城市设计策略，指出城市建设未来的发展方向和城市研究的重难点问题，为中国城市的健康有序发展提供有益借鉴。     

浅谈少学时普通化学的教学方法

对于少学时普通化学课程,为保证教学质量,必须采用有针对性的教学措施。本文结合课题组教师多年的教学经验,介绍了几种行之有效的教学方法。