双齿配位过渡金属化合物化学——Ⅲ.钒的邻巯基苯酚配合物的顺磁谱研究

测定了二个顺磁性化合物(Ph_1P)[V_2(mp)_6](Ⅰ)和(Ph_4P)_2[NaV(mp)_3 (MeCN)(MeOH)](Ⅱ)(H_2mp=邻巯基苯酚,o-HO_1C_6H_4SH)的固态和/或溶液中的顺磁波谱。(Ⅰ)的77K固态谱及(Ⅱ)的室温固态谱均经模拟计算,认为它们的钒原子处在S=l/2的Ⅰ=7/2状态,(Ⅱ)的低温(77K)溶液谱(乙腈)与Ⅱ的固态谱相同,均有特征的八条精细结构,认为非配对电子基本上定域在钒原子的周围。     

Computer simulation of liquid metal ion source optics

A numerical calculation of the electric field and current density distribution for a liquid metal ion (LMI) source has been carried out. If a field evaporation mechanism for ion formation is assumed an elongated Taylor cone shape emitter is required to account for the observed total currents. Trajectory calculations including the effect of uniform space charge have been carried out as a function of total current and particle mass. The predicted emission characteristics compare favorably with experimental results for Ga, however the homogeneous space charge model is unable to account for all of the experimentally observed increase in beam divergence with increasing mass and current.     

用反射电子显微术对金刚石表面的研究

本文用反射电子显微术观察了合成金刚石表面。发现在金刚石表面存在大量的台阶和微晶。结果表明,合成金刚石的表面具有普通液态结晶的特征。 关键词：     

解析电喷雾质谱法对感冒药中对乙酰氨基酚的快速检测

基于常压质谱的直接、快速、无需样品预处理检测的优势,该文拓展了其在药物质检领域的应用。采用自行搭建的解析电喷雾(DESI)装置,对常用感冒药对乙酰氨基酚片进行快速质谱检测,无需样品预处理,直接获得药片中有效成分的分子结构信息。为克服基质差异对定量分析的影响,以淀粉为基质构建对乙酰氨基酚模拟药片,在优化的基础上进行定量实验。针对实际药片中高浓度对乙酰氨基酚检测的需要,研究了其在较高浓度范围的定量关系,结果显示,方法对0.35～4.52 mg/mm²范围内的对乙酰氨基酚具有较好的线性关系(r²=0.998 2),定量下限为1.903 ng/mm²,检出限为0.237 ng/mm²,加标回收率为102%～114%。对3种市售的对乙酰氨基酚片进行直接检测,与厂家提供的标准数据相比,相对标准偏差(RSD)为7.2%～12%,表明方法具有较好准确度。该工作很好地证明了DESI-MS在药品快检中的优势,从而为药品质检提供了潜在的高效、可靠的检测手段。     

激光产生温稠密物质的微观动力学过程及状态诊断

随着大型激光装置的建立和精密测量技术的发展,强激光与固体相互作用成为实验室产生温稠密物质的一个重要手段。温稠密物质的结构复杂性、瞬态性和非平衡性给理论建模和实验测量带来了巨大挑战。本文系统介绍了激光产生温稠密物质的实验手段和理论模拟方法方面的重要进展,分析了其中的电子激发动力学、电子-离子能量弛豫过程、离子动力学等物理过程,总结了温稠密物质状态诊断的实验技术和理论方法,并论述了激光产生温稠密物质的发展趋势。     

HgCdTe薄膜的输运特性及其应力调控

窄禁带直接带隙半导体材料碲镉汞(Hg1–xCdxTe)是一种在红外探测与自旋轨道耦合效应基础研究方面都具有重要应用意义的材料.本文对单晶生长的体材料Hg0.851Cd0.149Te进行阳极氧化以形成表面反型层,将样品粘贴在压电陶瓷上减薄后进行磁输运测试,在压电陶瓷未加电压时观察到了明显的SdH振荡效应.对填充因子与磁场倒数进行线性拟合,获得样品反型层二维电子气的载流子浓度为ns=1.25×10^16m^-2.在不同磁场下,利用压电陶瓷对样品进行应力调控,观测到具有不同特征的现象,分析应是样品中存在二维电子气与体材料两个导电通道.零磁场下体材料主导的电阻的变化应来源于应力导致的带隙的改变;而高场下产生类振荡现象的原因应为应力导致的二维电子气能级的分裂.     

Geometric phase of an open double-quantum-dot system detected by a quantum point contact

We study theoretically the geometric phase of a double-quantum-dot(DQD) system measured by a quantum point contact(QPC) in the pure dephasing and dissipative environments, respectively. The results show that in these two environments, the coupling strength between the quantum dots has an enhanced impact on the geometric phase during a quasiperiod. This is due to the fact that the expansion of the width of the tunneling channel connecting the two quantum dots accelerates the oscillations of the electron between the quantum dots and makes the length of the evolution path longer.In addition, there is a notable near-zero region in the geometric phase because the stronger coupling between the system and the QPC freezes the electron in one quantum dot and the solid angle enclosed by the evolution path is approximately zero,which is associated with the quantum Zeno effect. For the pure dephasing environment, the geometric phase is suppressed as the dephasing rate increases which is caused only by the phase damping of the system. In the dissipative environment,the geometric phase is reduced with the increase of the relaxation rate which results from both the energy dissipation and phase damping of the system. Our results are helpful for using the geometric phase to construct the fault-tolerant quantum devices based on quantum dot systems in quantum information.     

Annealing-free Poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester-based organic solar cells

We report on the fabrication of efficient annealing-free organic solar cells using co-solvent solution considered as a promising method for low-cost and time-saving manufacturing. Higher device efficiency could be obtained compared to the pure solvent casted device, resulting from the improved crystallinity, optical absorption and transport properties. The power conversion efficiency of 2.8% was obtained, demonstrating the feasibility of achieving low-cost and high-efficiency organic solar cells without any additional treatment and processing additives.     

Mn掺杂LiFePO4的第一性原理研究

采用基于密度泛函理论的第一性原理方法, 计算了不同Mn掺杂浓度LiFe_1-xMn_xPO₄ (x=0,0.25,0.50,0.75) 的电子结构. 同时采用流变相辅助高温固相碳热还原法制备了LiFe_1-xMn_xPO₄ (x= 0,0.25,0.50,0.75) 材料. 理论计算表明: LiFePO₄具有E_g = 0.725 eV的带隙宽度, 为半导体材料. 通过Fe位掺杂25%的Mn离子可最大程度地 减小材料带隙宽度、降低Fe---O键及Li---O键键能, 进而提高材料的电子电导率及锂离子扩散速率. 实验结果亦表明, 当Mn掺杂量x=0.25时, 材料具有最优的电化学性能, 其具有约为158 mAh· g^-1的放电比容量以及551 Wh· kg^-1的能量密度. 理论计算与实验结果非常符合.