数字参考咨询服务

文章着重论述了数字参考咨询服务中对用户分析的问题,并简要介绍了东莞图书馆参考咨询服务工作开展的情况。     

ABS防抱死系统及其检测

现代汽车中有一种先进的制动机构。可保证在制动时不是完全刹死滑行，而是让车轮仍有一定的滚动．经研究这种方法可以更有效地制动．防抱死系统有一个自动检测车速的装置，用来控制车轮的转动，其原理如图1，铁质齿圈P与车轮同步转动，右端有一个绕有线圈的磁体，G是一个电流检测器．当车轮带动齿轮转动时，由于齿靠近线圈时被磁化，使磁通量增强，     

唐钢一铁炉料性能及合理搭配的研究

试验研究表明，唐钢一铁烧结矿粒度均匀，具有良好的强度和冶金性能；搭配２５－４０％酸性球团的综合炉料，具有较好的熔滴性能，是合理结构。     

西南科技大学办学特色思考

简述了高校办学特色,并对西南科技大学的3个办学特色进行了阐述：即对共建和产学研联合办学的办学体制特色;材料学、控制理论与控制工程、农学学科显示出的优势学科专业特色;“艰苦奋斗、自强不息”的校园文化特色作了阐述.     

THE COMRENSATED COMPACTNESS METHOD APPLIED TO QUASILINEAR PARABOLIC EQUATIONS OF HIGHER ORDER WITH BOUBLY STRONG DEGENERATION

This paper applies the compensated compactnessmethod to the study of a class of quasilinear parbolic equations of higher order with doubly strong degeneration. Some existence and uniqueness results are proved under certain conditions.     

Synthesis of cellulose carbamate by supercritical CO2-assisted impregnation: Structure and rheological properties

Cellulose carbamate, an environmentally friendly material presents an interesting alternative to petroleum-based polymers because of its renewable, biodegradable, biocompatible nature and its solubility in conventional solvents. In synthesis process of cellulose carbamate, urea was firstly impregnated into the cellulose pulp by supercritical CO₂(scCO₂), followed by the esterification of cellulose. The structure of cellulose carbamate was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The rheological properties of these cellulose carbamates in 9% sodium hydroxide solution were investigated, using a range of the nitrogen content, concentrations and shear rates.     

反式-9,10-二氢-9,10-二苄基-9,10-菲二醇的合成与表征

以菲醌为原料合成了标题化合物,通过IR和1H NMR对其结构进行了表征.氢谱分析表明,亚甲基二氢核构成了AB二级谱自旋体系,这主要是由于孤立亚甲基的2个氢是化学不等价造成的.通过Chem3D程序模拟得到了标题化合物的能量最优化立体结构.     

Electroless deposition of open-end Cu nanotube arrays

Cu nanotube arrays were fabricated by electroless deposition using porous anodic aluminium oxide membranes as templates. This was accomplished by a four-step procedure, i.e. pore-wall modification, polishing treatment, sensitization-activation and electroless deposition. The as-synthesized Cu nanotubes possess controllable inner diameter and open ends.     

Microstructure and wear properties of laser clad Cuss/Cr5Si3 metal silicide composite coatings

Wear resistant Cu-based solid solution (Cu_ss) toughened Cr₅Si₃ metal silicide composite coatings were fabricated on austenitic stainless steel AISI321 by laser cladding process. Due to the rapidly solidified microstructural characteristics and the excellent toughening effect of Cu_ss on Cr₅Si₃, the Cu_ss/Cr₅Si₃ coatings have outstanding wear resistance and low coefficient of friction under room temperature dry sliding wear test conditions coupling with hardened 0.45% C steel.     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006