Synthesis,Structures, and Luminescent Properties of two 3, 5‐Dimethyl‐1‐H‐1, 2,4‐triazole‐Based Zinc Metal‐Organic Frameworks with Aromatic Carboxylate as Coligand

Two metal‐organic frameworks, [Zn(dmtrz)(btrc)_1/3]_n ( 1 ) and [Zn₂(dmtrz)₂(btec)(H₂O)₂]_n ( 2 ) (dmtrz = 3, 5‐dimethyl‐1‐H‐1, 2,4‐triazole, btrc = 1, 3,5‐benzenetricarboxylate, btec = 1, 2,4, 5‐benzenetetracarboxylate), were synthesized by hydrothermal reaction. The crystal structure analysis reveals that compound 1 is a dense 3D framework with Schläfli symbols of {4³}₂{4⁶ · 6⁶ · 8³}₃, which is a loh1 structure. Compound 2 is a 2D network. In addition, the photoluminescence of two compounds were studied in solid state at room temperature, together with their thermal analysis.     

Microbial desulfurization of waste latex rubber with Alicyclobacillus sp.

A microbe with desulfurizing capability, Alicyclobacillus sp., was selected to recycle waste latex rubber (WLR). The growth characteristics of the microorganism and the technical conditions in the co-culture desulfurization process were studied. The desulfurization effect of Alicyclobacillus sp. on the WLR was characterized, and the mechanism for the microbial desulfurization of WLR was tentatively explored. The results showed that adding 5% (w/v) WLR into medium had little effect on the growth of Alicyclobacillus sp. The surfactant polysorbate 80 (Tween 80) had a toxic effect on Alicyclobacillus sp., but the growth of the microbe was vigorous if the proper technique was used: the mixing of WLR with Tween 80, followed by the addition of the mixture into the culture media. With the increase of desulfurization time, the swelling value of desulfurizated waste latex rubber (DWLR) increased, but the crosslink density decreased. After co-culture desulfurization for 8–10 days, a DWLR with good desulfurization effect was obtained. The mechanical properties of natural rubber (NR)/DWLR composite improved significantly over those of NR/WLR composite. XPS and FTIR results revealed that Alicyclobacillus sp. could break the crosslinked sulfur bonds and oxidize them to sulfones groups. The increase of O element content on the surface of DWLR was confirmed by water contact angle measurements. The relationship between the crosslink density and sol fraction of DWLR with different desulfurization times agreed with the Horikx equation, an indication that the microorganisms could break the crosslinked sulfur bonds on the surface of WLR, but leaving the main chains intact.     

Preparation and Characterization of Polymer‐Protected Pt@Pt/Au Core‐Shell Nanoparticles

Poly(N‐vinyl‐2‐pyrolidone) protected Pt‐core bimetallic Pt/Au‐shell (Pt@Pt/Au) nanoparticles were prepared by multi‐step reduction of HAuCl₄ and H₂PtCl₆ alternately by hydrogen adsorbed on platinum atom. Transmission electronic microscopy (TEM) and x‐ray diffraction (XRD) were used to characterize Pt@Pt/Au nanoparticles. The structure of the shell of the nanoparticles seems to be the Au‐Pt solid solution.     

KNO3体系中离子液体辅助水煤浆电解脱硫

在稳流条件下,考察了KNO₃体系中离子液体辅助煤浆电解脱硫效果.研究了煤浆电解过程中离子液体结构、浓度、温度和时间对脱硫率的影响.当咪唑类离子液体有机结构相同时,不同阴离子脱硫率由高到低顺序为:Br^- >BF₄^- >Cl^-;当阴离子同为Br^-时,咪唑脱硫效果优于吡啶.随着吡啶类离子液体([BPy]Br)浓度增加,脱硫率先增加,在0.3 mol/L处达到最大值,而后下降.此外,脱硫率随温度和时间增加而增大.最后,通过X射线光电子能谱(XPS)分析技术对实验前后煤中有机硫形态进行了分析.结果表明,噻吩主要通过萃取-氧化反应脱除,而其他形式有机硫(如硫醚、亚砜)则主要通过促进氧化及水解反应脱除.     

Correlation of SiO x layer thickness and properties of BOPP/SiO x composite films with spin coating process parameters

The effects of the spin coating process parameters on the thickness of the SiOx layer of the BOPP/SiOx composite film were investigated. When the concentration of tetraethoxysilane (TEOS) increased from 12.5 vol% to 55% vol%, the SiOx thickness increased from about 80 nm to 470 nm. In the sol time range of 1.5 h to 5 h the SiOx layer thickness reached a maximum at about 4 h and the change of the thickness roughly matched the change of the silica colloidal sphere sizes in sol. When the spin-coating speed of the dispensing stage increased from 450 r/min to 500 r/min, the SiOx layer thickness drastically decreased from about 1.67 μm to 400 nm. While the spin-coating speed of the thinning and drying stage went up to 1200 r/min, the SiOx layer thickness was in the range of 330 nm to 390 nm. It was also found that the SiOx layer thickness was almost increased linearly from about 500 nm to 1.02 μm with the ratio of the commercial silica colloidal to the TEOS from 0.2 to 1.0. The water contact angles decreased to about 23.0° for the BOPP/Si-Sol composite film with 1.67 μm SiOx layer and about 4.0° for the BOPP/mixing Si-Sol composite film with 1.02 μm SiOx layer. Compared to BOPP, the light transparency of the BOPP/Si-Sol composite films decreased by about 5.5% with the SiOx layer from about 80 nm to 1.67 μm and by 7.0% for the BOPP/mixing Si-Sol composite film with the SiOx layer from about 350 nm to 1.02 μm respectively.     

Syntheses and Crystal Structures of Two Tin(Ⅳ) Complexes with Aminosilane Bearing Ligand

Aminosilane bearing bulky substituents on nitrogen: LH2(L=Me2Si(NDipp-)2 , Dipp=2,6-diisopropylphenyl) was reacted with BuLi in toluene. The resulting bulky chelating dianion Me2Si(NDipp-)2 was used to synthesize the unusual spirocyclic heterotriatomic complex [Me2Si(NDipp)2]2Sn (1) by its reaction with SnCl4 and the bulky heterotriatomic complex Me2Si(NDipp)2SnPh2 (2) with Ph2SnCl2.1 belongs to the monoclinic system, space group P21/n with a=13.193(2), b=20.663(3), c=20.403(3), β=99.954(2)o, V=5478.3(15)3 , C55H85.5N4Si2Sn, Mr=977.64, Z=4, Dc=1.185Mg/m3 , μ(MoKα)=0.547mm-1 , F(000)=2086, S=1.000, the final R=0.0614 and wR=0.1322 for 14446 observed reflections (I2σ(I)) and R=0.0797 and wR=0.1456 for all data. 2 belongs to the triclinic system, space group Pī with a=10.36(15), b=13.204(7), c=14.363(7), α=90.214(10), β=106.182(7), γ=109.854(8)o, V=1764.4(15)3 , C38H50N2SiSn, Mr=681.58, Z=2, Dc=1.283 Mg/m3 , μ(MoKα)=0.785 mm-1 , F(000)=712, S=1.002, the final R=0.0498 and wR=0.0955 for 7533 observed reflections (I2σ(I)) and R=0.0676 and wR=0.1018 for all data. In the structure of 1, the tin atom is located in the spirocyclic center of the two fused four-membered SnN 2 Si rings. The two complexes were characterized by 1H NMR, elemental analysis, and single-crystal X-ray structural analysis.     

The optimal cell gap determination of a liquid crystal wavefront corrector from a single photoelectric measurement

It has been a crucial technique to improve the dynamic response characteristics of a liquid crystal wavefront corrector (LCWFC) with optimal cell gap since the LCWFC needs at least 2π (or π) phase modulation in adaptive optics systems (AOSs). We have given a complete process for obtaining the optimal cell gap accurately from a single photoelectric measurement, which can be conducted with a liquid crystal (LC) cell of any known thickness. This method has been analysed theoretically and confirmed experimentally by using a wedge-shaped cell; the experimental results match very well with the theoretical analysis. The response time of an optimal gap cell can be a novel evaluation method of response performance of LC materials.     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

The effect of mesogenic and non-mesogenic crosslinking units on the phase behaviour of side-chain smectic and cholesteric elastomers

Chiral monomer (M₁ ), mesogenic and non-mesogenic crosslinking agents (C₁ and C₂ ), and the corresponding liquid crystalline elastomers (P₁ and P₂ series), have been synthesised. Their chemical structures have been characterised by Fourier transform infrared or ¹H nuclear magnetic resonance and their phase behaviour investigated by differential scanning calorimetry, polarising optical miscoscopy, thermo-gravimetric analysis (TGA) and X-ray diffraction. The effect of the crosslinking unit on the phase behaviour of the elastomers has been studied. M₁ showed a cholesteric oily streak and focal conic texture. C₂ exhibited a nematic enantiotropic thread-like and schlieren texture, and a monotropic fan-shaped texture in the S_A phase. Due to the introduction of the mesogenic crosslinking unit, elastomers, P_2-1 ?P_2-5 , exhibited a cholesteric phase, while elastomers, P_1-1 ?P_1-4 , derived from a non-mesogenic crosslinking unit, exhibit a S_A phase. As the content of the crosslinking unit increased, the T _g of the P₁ series initially decreased and then increased, and the T _i of the series decreased. In the P₂ series the T _g increased, but the T _i initially increased and then decreased. TGA confirmed that all the elastomers had improved thermal stability.