对两种体育课生理负荷测定方法的比较

本文通过对两种体育课生理负荷测定方法的比较,能使比较简便的“口诀法”得到推广应用。     

三种饲料添加剂对幼兔增重及饲料转化率的对比试验

对新球虫灵,喹乙醇,免健宝Ⅰ号,Ⅱ号配套复合饲料添加剂进行的幼兔饲养对比试验结果表明:以免健宝Ⅰ、Ⅱ号配套复合饲料添加剂联合效果为最佳,其它依次为单用兔健宝Ⅱ号、兔健宝Ⅰ号、喹乙醇,新球虫灵。而且兔健宝Ⅰ、Ⅱ号配套复合饲料添加剂有易混匀,简化配合饲料工序、节省饲料及增重快等优点。     

神经网络自适应滤波器在故障诊断中的应用

分析了用自适应滤波器进行故障诊断的方法．针对该方法在计算上要花费大量时间、难于完成实时诊断任务的缺点，提出了用神经网络自适应滤波器来完成故障诊断的方法．神经网络有极快的运行速度，能很好地完成实时诊断任务．     

运动时血浆皮质醇变化的影响因素

本文综合了在运动时血清皮质醇浓度的变化不仅受运动形式，运动强度，运动持续时间，血浆ｐＨ，训练水平，缺氧，心理等多种因素的影响，并且各因素间的相互作用也是影响其变化的重要因素。     

一个关于抽象经济的均衡存在定理

在抽象经济的均衡存在定理中，一般都假设偏好对应具有开图像。用一个较弱的条件代替关于偏好对应的开图像假设，证明了均衡的存在性。所得结果是Ｙａｎｎｅｌｉｓ（１９８７）均衡存在定理的一个推广．     

蒸球球内温度分布及测量的研究

对蒸球球内温度分布进行了详细的分析，提出采用中通管测量球内温度并通过计算机对测量值进行校正的方法，实践说明了该方法效果良好，为采用Ｈ－因子数学模型控制蒸煮过程提供了更合理的手段。     

乙醇对小白鼠胚胎的毒性和维生素的解毒作用

乙醇对小白鼠有致畸效应,尤其是对中枢神经系统(CNS)和骨骼系统.适量的维生素B_1和烟酰胺能解除由乙醇引起的小白鼠胎鼠毒害作用.     

介质腔稳频MIC射电接收的研究

本文研究的是射电望远镜中的本机振荡源、混频器和前中放三部分的混合MIC,对高Q介质稳频的反射型与反馈型两种振荡器的综合方式,理论上作了重点分析探讨,并研制成带有DRO的MIC组件。     

产芽孢细菌B130（BACILLUS SPP）培养条件的初步研究

本文就产芽孢细菌B130(Bacillus spp.)培养条件进行了初步研究,筛选出产菌量较高且来源方便,价格低廉的培养基成分(％w/v):豆饼粉3,麸皮4,玉米粉3,最适pH:6.5或8.0,确定了最佳培养时间区间为平衡期末期。     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007