梯形水平折梁的内力分析

本文对梯形水平折梁（０≤α＜∏２）和矩形水平折架（α＝∏２）用最小余能原理进行了内力分析，并导出了相应的计算公式，可在工程结构设计中采用     

FMS在线刀具存取策略研究与系统开发

该文在已有刀具管理系统管理方法的研究基础上，针对ＦＭＳ刀具在线管理系统的结构特点，建立了ＦＭＳ在线刀具管理的体系结构，并提出了适用于ＦＭＳ、ＣＩＭＳ的刀具存取策略算法，包括进出站管理、机床局部刀库管理、中央刀库管理等几部分，最后对其进行了软件开发。     

Mn_2O_3超微粒子的制备及其光学非线性

本文合成了表面修饰的Mn2O3，超微粒子（UFP）有机溶胶，并采用简并的四波混频（DFWM）手段研究了Mn2O3有机溶胶的三阶非线性光学特性，得到了较大的非线性极化率X3．最后讨论了Mn2O3超微粒子的三阶非线性产生机制．     

Si1－xGex/Si量子阱发光材料的分子束外延生长及其结构研究

采用固源Si分子束外延,在较高的生长温度于Si(100)衬底上制备出Si1－xGex/Si量子阱发光材料。发光样品的质量和特性通过卢瑟福背散射、X射线双晶衍射及光致发光评估。背散射实验中观察到应变超晶格的反常沟道效应;X射线分析表明材料的生长是共度的、无应力释放的,结晶完整性好。低温光致发光主要是外延合金量子阱中带边激子的无声发射和横光学声子参与的激子复合。并讨论了生长温度对量于阱发光的影响。     

Shape transition from InAs quantum dash to quantum dot on InP(3 1 1)A

We report on the shape transition from InAs quantum dashes to quantum dots (QDs) on lattice-matched GaInAsP on InP(3 1 1)A substrates. InAs quantum dashes develop during chemical-beam epitaxy of 3.2 monolayers InAs, which transform into round InAs QDs by introducing a growth interruption without arsenic flux after InAs deposition. The shape transition is solely attributed to surface properties, i.e., increase of the surface energy and symmetry under arsenic deficient conditions. The round QD shape is maintained during subsequent GaInAsP overgrowth because the reversed shape transition from dot to dash is kinetically hindered by the decreased ad-atom diffusion under arsenic flux.     

ON THE GENERALIZATIONS OF KALANDIA＇S LEMMA

Based on Bernstein＇s Theorem, Kalandia＇s Lemma describes the error estimate and the smoothness of the remainder under the second part of Hoelder norm when a HSlder function is approximated by its best polynomial approximation. In this paper, Kalandia＇s Lemma is generalized to the cases that the best polynomial is replaced by one of its four kinds of Chebyshev polynomial expansions, the error estimates of the remainder are given out under Hoeder norm or the weighted HSlder norms.     

介质的非均匀性对高次谐波影响的研究

讨论了气体介质的非均匀性对飞秒激光高次谐波产生过程的可能影响.计算结果表明,采用喷阀技术所提供的气体介质的密度梯度和气体原子运动速度的影响很小,不会产生实验上可观测的效果.这一结果支持了喷气靶在高次谐波产生中的广泛应用 关键词： 高次谐波 气体介质 各向异性 飞秒激光     

Tokamak中自举电流的剖面准直性

利用Harris模型,通过求解等离子体平衡方程,计算俘获粒子份额,分别对常规剪切和中心负剪切下tokamak中的自举电流的大小和剖面准直性进行了计算和分析.自举电流分布与等离子体平衡电流分布之间的剖面准直性可以通过调整等离子体的密度、温度和电流分布参数,以及描述等离子体形状的拉长度k和三角变形因子d来获得.中心负剪切位形有利于自举电流产生,并有好的剖面准直性.通过计算比较,分别在常规剪切位形下和中心负剪切位形下获得了一组优化的等离子体参数,在这组参数下,自举电流有较大的份额和好的剖面准直性 关键词： tokamak 自举电流 剖面准直性     

New Kamenev-type oscillation criteria for second-order nonlinear differential equations with damping

Some new oscillation criteria are established for the nonlinear damped differential equation (r(t)y′)′+p(t)y′+q(t)f(y)=0 that are different from most known ones in the sense that they are based on a class of new functions Φ(t,s,r) defined in the sequel. Our results are sharper than some previous results which can be seen by the examples at the end of this paper.