多路抢答器设计

为适应高校等多代表队单位活动的需要设计一个多路抢答器，讲述了电路各部分的设计及功能，并说明了调试中出现的问题及解决的方法     

中国保健食品的优势与发展

中国保健品最大特点与优势是传统养生学与现代营养学及食品科学相结合，历史悠久，近年发展迅速。文章论述了中国保健食品的历史与现状，基本理论与技术内容，行政管理与市场监督，并对目前出现的一些问题及对策进行了讨论。     

内燃机燃烧过程仿真后处理输入文件Ipost的研究

以系统论为理论依据，在计算机上进行试验和分析，研究了输入件的设计要求和方法。研究表明：后处理输入件要设计后处理硬件类型、图形件(*．ps)的输出模式和镜像输出条件等总则，要确定输出内容包括网格划分和性能计算结果两个大的方面，网格划分的输出可以按平面图和三维图两种类型输出。性能等高线图和矢量图可以按正平面图和斜平面图的类型输出，网格图和性能图均按仿真计算的曲轴转角(时间)输出。     

基于元胞自动机的多自主体人员行为模型及其在性能化设计中的应用

目前性能化设计规范一个最主要的特点是从强调财产保护转变到强调生命安全保护，因此对建筑物内人员行为特征和运动规律的研究正越来越受到人们的重视。元胞自动机模型在交通流研究中的应用已经开展多年并取得了很多有用的成果，但涉及人的行为特征的研究往往十分复杂，在这方面利用自主体来研究具有较大的优势。给出的模型结合了这两方面各自的优势，是在元胞自动机交通流、行人流基本框架上建立起的多自主体人员行为模型，它对评估建筑物的设计方案具有很好的参考作用。     

Stability of Semiconductor States with Insulating and Contact Boundary Conditions

We prove the existence of global smooth solutions near a given steady state of the hydrodynamic model of the semiconductors in a bounded domain with physical boundary conditions. The steady state and the doping profile are permitted to be of large variation but the initial velocity must be small. Two cases are considered. In the first one the problem is three-dimensional, the boundary conditions are insulating and the steady state velocity vanishes. In the second one, the problem is one-dimensional, the boundary is of contact type and the steady state velocity does not vanish.     

A new molecular rectifier device and some research in its processing

Organic materials of D-π-A type MR-X (MR-1: p-dimethylaminophenylethenetrica-rbonitrile and MR-2: p-diphenylaminophenylethene tricarbonitrile) were designed and synthesized. The device with a sandwich structure shows good rectificative phenomena. The highest rectification ratio 10000 was achieved in device Cu/MR-1/Ag, and about 100 in other device M/MR-X/M (M: Cu, Ag). It has been found that rectificative phenomena exist only in the atmosphere-liquid interface region by means of liquid adsorption, and electric field could help form the oriented molecular film. __________ Translated from Journal of Fudan University (Natural Science), 2005, 44(4) (in Chinese)     

Existence of the uniformly minimum risk equivariant estimators of parameters in a class of normal linear models

In this paper, we study the existence of the uniformly minimum risk equivariant (UMRE) estimators of parameters in a class of normal linear models, which include the normal variance components model, the growth curve model, the extended growth curve model, and the seemingly unrelated regression equations model, and so on. The necessary and sufficient conditions are given for the existence of UMRE estimators of the estimable linear functions of regression coefficients, the covariance matrixV and (trV)^α, where α > 0 is known, in the models under an affine group of transformations for quadratic losses and matrix losses, respectively. Under the (extended) growth curve model and the seemingly unrelated regression equations model, the conclusions given in literature for estimating regression coefficients can be derived by applying the general results in this paper, and the sufficient conditions for non-existence of UMRE estimators ofV and tr(V) are expanded to be necessary and sufficient conditions. In addition, the necessary and sufficient conditions that there exist UMRE estimators of parameters in the variance components model are obtained for the first time.     

双掺(Tm3+,Tb3+)LiYF4激光器1.5 μm波长激光阈值分析

由速率方程推出了双掺（Tm^3 ,Tb^3 ）离子准四能级系统的激光阈值解析式，讨论了Tm^3 和Tb^3 离子之间的相互作用。分析了1.5μm波长附近的激光阈值和Tm^3 、Tb^3 离子的掺杂原子数分数及晶体长度的关系。结果表明，对于对应Tm^3 离子^3H4→^3F4跃迁的约1.5μm波长的激光，激活离子Tm^3 的掺杂原子数分数过大时，交叉弛豫作用将使系统阈值迅速增加。Tb^3 离子的加入，一方面能抽空激光下能级，起到降低阈值的作用；另一方面亦减少了激光上能级的寿命，使阈值升高。故Tb^3 离子有最佳掺杂原子数分数。对于Tm原子数分数为y=0.01的Tm:LiYF4晶体，Tb^3 离子的最佳掺杂原子数分数为0.002左右，同时表明，激光阈值与晶体长度有关。最佳晶体长度与Tm^3 、Tb^3 离子的掺杂原子数分数以及晶体的衍射损耗和吸收损耗有关。     

电路过渡过程的计算机辅助分析

电路过渡过程所列方程是微分方程，本文中采用的是方框图模型分析法，即将微分方程的复杂示解分解成最基本的加（减）、乘（除）、积分（微分）、增益等运算，采用VB设计用户界面产进行计算，并给出了一算例。