海藻酸-磷脂微囊复合水凝胶的制备、表征及毒理学分析

采用薄膜分散法合成磷脂微囊,根据胶粒的双电层理论,通过在微囊中加入氯化锰、氯化钙和氯化镁电解质溶液,使微囊处于相对稳定的状态.研究发现加入氯化锰和氯化钙溶液,微囊胶体的粒径没有明显的变化,但加入一定浓度氯化镁溶液,其粒径明显变大.为了进一步增加磷脂微囊稳定性,将氯化锰、氯化钙、氯化镁磷脂微囊胶体分别与海藻酸钠(SA)溶液混合.结果表明,氯化镁与SA几乎不能形成水凝胶,氯化钙与SA形成水凝胶能力强于氯化锰.微囊胶体溶液中的磷脂酰丝氨酸(PS)可以与Ca~(2+)和Mg~(2+)键合形成PS-Ca~(2+)和PS-Mg~(2+),但不能与Mn~(2+)键合形成PS-Mn~(2+).对氯化钙磷脂微囊与海藻酸钠合成的复合水凝胶的形貌、溶胀率及细胞毒性进行了表征,结果表明,氯化钙与SA形成的水凝胶可以捕获胶体中磷脂微囊,且形貌规整,结构稳定,无细胞毒性.     

Preservation of entanglement in a two-qubit-spin coupled system

A theoretical scheme for preserving the entanglement in a two-qubit-spin coupled system in the presence of Dzyaloshinskii–Moriya (DM) anisotropic antisymmetric interaction is proposed. On the basis of a sequence of operations performed periodically on the system, the scheme can preserve the entanglement of the system starting from any initial state with any desired high precision for any desired long duration.     

浙闽龙头草在中国武陵山区分布的新记录

本文报道了武陵山区的植物新记录——浙闽龙头草Meehania zheminensis A.Takano,Pan Li&G.-H.Xia,其与日本特有种高野山龙头草Meehania montis-koyae Ohwi形态近似.浙闽龙头草最初在中国浙江与福建被发现,并鉴定为高野山龙头草,后做了形态与分子的比较,确定其为新种.该种是武陵山区贵州、湖南和湖北3省的植物新记录.本文中引用的凭证标本均保存于吉首大学植物标本馆(JIU).     

用板式电位差计实验系统和SPSS标定电池的内阻

针对板式电位差计测量电阻的实验装置,以干电池为研究对象,用补偿法测量实验数据,引入SPSS的曲线估计功能,得到并验证出长度和标准电阻的复合量与长度量的定标曲线,由此标定出待测干电池的内阻。用置信概率为95的不确定度,对实验结果进行分析和评价,最终得到更为直观的、可靠的实验结果。     

上海软土地区钢管桩受力特性现场试验研究

结合上海地区某工程项目开展2组钢管桩试桩现场试验.根据静载试验实测数据,分析Q-s曲线和桩身轴力分布曲线以研究承载变形特性.研究成果对该地区及类似地质条件下超长大直径桩的设计提供有益的参考.     

Synthesis of highly monodisperse quantum dot‐loaded polymer beads by impregnation and precipitation techniques

A novel approach to the synthesis of highly monodisperse quantum dot‐loaded polymer beads by combining impregnation and precipitation techniques was reported. The monodisperse poly(glycidyl methacrylate) (PGMA) beads were first synthesized by dispersion polymerization. Then, the PGMA beads were chemically modified to generate carboxyl groups, and impregnation of cadmium ions (Cd²⁺) inside the beads. Subsequently, the cadmium ions were reacted with thioacetamide to form cadmium sulfide (CdS) quantum dots within the polymer beads. The morphology, structure, and properties of CdS quantum dot‐loaded polymer beads were studied by field emission scanning electron microscope (SEM), transmission electron microscope, fluorescence spectrophotometer, fluorescence microscope, Fourier transform infrared spectroscopy, powder X‐ray diffraction, and thermogravimetric analysis. The results indicated that the CdS quantum dot‐loaded polymer beads had an average size of 1.4 μm, and were highly monodisperse. More interestingly, the CdS quantum dots distributed evenly within the polymer beads, which provide very strong fluorescence intensity. The existence of carboxyl groups on the quantum dot‐loaded polymer beads was measured quantitatively, and was found to be 0.2 mmol/g. These CdS quantum dot‐loaded polymer beads involving functional carboxyl groups would have potential applications in biological immunoassay and photoelectronic fields. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

添加剂PVP和MTS对合成Beta分子筛结构与性能的影响

分别以铝酸钠和硅溶胶为铝源和硅源,四乙基氢氧化铵为模板剂,在水热条件下,考察了添加剂(聚乙烯吡咯烷酮(PVP)和甲基三乙氧基硅烷(MTS))对合成Beta分子筛结构与性能的影响,并通过XRD、TEM、BET、ICP、~(29)Si-NMR和NH_3-TPD等方法对合成样品进行了结构表征和作用机理讨论,同时以催化裂化异丙苯为模型反应评价其催化性能。结果表明,与传统Beta分子筛相比,加入PVP后所得样品具有更高结晶度和较高的硅铝物质的量比(25.68)以及较大的比表面积(772 m~2/g);而加入MTS后尽管具有较大比表面积(657 m~2/g)和较高硅铝物质的量比(25.76),但是结晶度却相对降低,且粒径减小(160-320 nm)。两种添加剂作用下所得样品均具有更多酸量,在催化裂化异丙苯的反应中表现出较高的催化活性。     

About macroscopic models of instability pattern formation

Various macroscopic models to describe instability pattern formation are discussed in this paper. They are similar to the Ginzburg–Landau envelope equation, but they can remain valid away from the bifurcation and are based on the technique of Fourier series with slowly varying coefficients. We focus on two questions: the need to take phase changes into account and the boundary conditions to be associated with macroscopic models. The analysis is carried out on the basis of numerical simulations for the problem of a compressed beam on a nonlinear foundation that is quite similar to the well known Swift–Hohenberg equation. The first macroscopic model involves a real envelope so that the phase is assumed to be constant. The second model is also macroscopic and it is a sort of Ginzburg–Landau equation with a complex envelope. The third one follows from a multi-scaled approach with a numerical bridging between the full model near the boundary and a macroscopic model in the bulk.     

Magnetization switching modes in nanopillar spin valve under the external field

The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization ...     

Synthesis and rheological investigation of self‐healable deferoxamine grafted alginate hydrogel

Deferoxamine grafted alginate (SA‐DFA) was successfully synthesized via amidation of sodium alginate with deferoxamine mesylate as determined by H‐NMR and elemental analysis. SA‐DFA with different graft yield was obtained by adjusting the ratio of sodium alginate and deferoxamine mesylate. It was found that aqueous solution of SA‐DFA could form hydrogel spontaneously due to hydrogen bonding interactions, which also endowed the SA‐DFA hydrogel with self‐healing capability. The healing efficiency of SA‐DFA hydrogels ranged from 53.64 to 90.16%. In addition, surface morphologies of SA‐DFA hydrogels before/after self‐healing process were demonstrated by SEM images. We anticipated that such self‐healable alginate hydrogel would be applied in the field of wound healing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 856–865