Compton软化过程的扩散方程

本文讨论X射线穿过“冷”等离子体介质时所发生的辐射转移过程,这种由电子-光子散射造成的特殊转移过程被称做Compton软化.文中导出了软化过程的扩散方程式,并指出它在天体物理与辐射物理中的潜在应用.     

沥青路面玻璃纤维加劲格栅的理化性能研究

通过沥青路面玻璃纤维加劲格栅的理化性能试验 ,给出了格栅的耐热性、耐腐蚀性、材料属性、抗张强度、弹性模量、温度对强度的影响等试验结果 ,为产品的应用提供了科学依据。     

密度测量实验中仪器的正确使用与巧读数据

结合实验仪器的结构特点与工作原理,分别介绍了游标卡尺、螺旋测微计和物理天平的正确使用以及巧读数据的方法和步骤,指出并分析了实验教学过程中,在使用游标卡尺、螺旋测微计和物理天平及读数中常见的一些错误和问题。     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

蓄电池监控模块的可扩充性设计

为使蓄电池监控模块在不断扩充的电源监控系统中能可靠、稳定地运行 ,从硬件和软件两个方面进行了蓄电池监控模块的可扩充性设计 ,其中采用多种网络接口并存的硬件结构和对接收数据的特殊软件处理方法 ,该模块能成功地应用于多个通信局 (站 )的电源监控系统     

ELECTRON PARAMAGNETIC RESONANCE STUDIES OF SINGLE CRYSTAL SODIUM HEXAMOLYBDOCHROMATE (Ⅲ)Cr~(3+)/Na_3(AlMo_6O_(24)H_6)·8H_2O

An X-band EPR study on a Na_3(CrMo_6O_(24)H_6)·8H_2O single crystal diluted by its isomor-phic compound Na_3(AlMo_6O_(24)H_6)·8H_2O at room temperature is reported. Using the least squares-fitting method to simulate the EPR data for principal planes, the Hamiltonian parameterswere obtained. The principal values of the g tensors are g_(ZZ) = 1.904, g_(XX)= 1.973, g_(YY)=1.933. The zero field splitting tensor parameters are D = 0.275 cm~(-1), E = 0.05 cm~(-1). The fielddependence of Cr~(3+) energy levels with field at different angles from the principal axes whenthe field is along the principal planes is calculated based on these experimental parameters.The isofrequency plots of calculated field vs. angle are also shown. They agree well with theexperimental results.     

基于SOCKET技术的信息刷新功能

通过使用JAVA的SOCKET技术，阐述了服务端的监听程序记录客户端聊天人员的上线或者离线信息。说明了当客户端有新的聊天人员登陆系统的时候，服务端一方面记录该客户端聊天人员的上线信息，另一方面将这个新的信息发送到所有客户端，并显示出来，当客户端聊天人员下线的时候，处理的原理和客户端聊天人员上线过程类似。实现了在线客户信息的自动更新。     

复合型加载下缺口前应力应变分布的有限元分析

用有限元法计算了一种低合金高强钢缺口试样在非对称四点弯曲加载(Ⅰ Ⅱ型复合加载)下缺口前端的变形和应力应变分布.研究结果表明:纯Ⅰ型加载时,缺口前端变形和塑性区形状对称分布.Ⅰ Ⅱ型复合加载下缺口前端的变形为一侧钝化,另一侧锐化,塑性区顺时针旋转一个角度θ,且θ随Ⅱ型载荷比例的增加而增大.表征缺口前端变形程度的d/b0值,随外加载荷P/Pgy的增加和Ⅱ型载荷比例的增加而增大.另外,对缺口前端最小塑性区路径上的最大切向正应力σθθ、三相应力度σm/和等效塑性应变εp的分布,以及它们随外加载荷P/Pgy和Ⅱ型载荷比例的变化规律也进行了分析,发现缺口试样的开裂遵循最大切应力判据.     

分层海洋中大直径桩柱的波浪力

研究了在两层流体中大直径桩柱的水动力特性。基于分离变量方法，建立了绕射势的级数解，导出了作用于大直径桩柱上的绕射力的计算公式。与单层流体不同的是，对两层流体，由于内波的存在，作用在大直径桩柱上的绕射力，除了自由表面波绕射力外，还存在内波绕射力的作用。对所建立的绕射力的求解模型进行了数值模拟，并与单层流体的情况进行了比较，得到了一些有意义的结果。