Effect of Demulsifiers on Dilatational Properties of Crude Oil–Water Interfaces

The dilatational properties of polyether demulsifiers PEA, PEB, PEC, PED, PEF, and PEG at the decane-water interface were investigated. Meanwhile, the effect of demulsifiers with different structures on interfacial dilatational modulus of diluted crude oil also was explored. The properties of demulsifiers are compared and analyzed in combine with the dilatational parameters at decane-water interface and at 5% crude oil-water interface. The results show that interfacial dilatational viscoelasticity could characterize the interfacial behavior of demulsifiers. The demulsifiers, which have different kinds or structures, have different effects on destroying the interfacial film of crude oil with increasing bulk concentration. Therefore, the dosage of demulsifier is a very important role in controlling nature of crude oil film.     

Mechanism of Electrical Percolation of w/o Microemulsions Formed by Nonionic Surfactants

A study was carried out on the mechanism of electrical conductivity percolation of H₂O/C₁₆EO₂₀/n-butanol/heptane microemulsions. Electrical conductivity, UV-vis spectroscopy and FTIR spectra were used to study the diluted “dry” microemulsions with the mass ratio of C₁₆EO₂₀/n-butanol/heptane = 3:3:4. The results of electrical conductivity showed that the percolation occurred around φ_w = 20 wt% and the transition of w/o microemulsions to bicontinueous microemulsions happened when φ_w = 45 wt%. From the UV-vis absorption spectra, it was found that the absorption of methyl orange (MO) in microemulsions shifted red than that of in oil phase, but the maximal absorption peak (λ_max) remained unchanged when φ_w > 20 wt%. It implied that the position of MO solubilized in microemulsions was unvaried after free water appeared in the core. FTIR spectra revealed that the OH band of water in microemulsions moved to high frequency at low φ_w (< 20 wt%) and became broader at high φ_w. It indicated that the added water only caused the hydration of EO at low φ_w, the hydration completed when φ_w > 20 wt% and then the residual water entered into the core with properties similar to bulk water. The presence of free water as ions exchange medium will cause the electrical conductance increased. The percolation appeared after the hydration of EO completed.     

Development of Phosphatidylethanolamine Liposomes That Efficiently Retain Encapsulated Vinorelbine Bitartrate

A hydrophilic and temperature-induced degradation drug, vinorelbine bitartrate (VB)-loaded phosphatidylethanolamin sterically stabilized liposomes (PSLs) were prepared by the thin film hydration method. Liposomes were made of phosphatidylethanolamine: cholesteryl: oleic acid (PE: CHOL: OA, 6:4:3 mass/mass). The mean particle size of the PSLs ranged from 600 to 650 nm. The transmission electron microscope (TEM) images displayed that the shape of the PSLs was multilamellar vesicles with smooth surface. The highest entrapment efficiency (EE) and drug loading capacity (DL) could reach up to 81.2 and 16.6%, respectively. The studies of drug release showed that the drug release could last for much more than 48 hours. The PSLs was evaluated by comparing the rate of release of encapsulated VB in different phosphate buffer solution (PBS).     

Synthesis of aromatic diamine-based benzoxazines and effect of their backbone structure on thermal and flammability properties of polymers

Three kinds of novel aromatic diamine-based benzoxazines containing naphthalene, propane-2,2-diyldibenzene and neopentyl groups in the backbone, respectively (designated as BAPNCP, BAPBACP and BAPNPGCP, respectively), were synthesized and characterized. In addition, the effects of backbone structures on curing behaviors of the monomers and thermal and flammability properties of the resulting polymers were systematically studied. The results indicated that BAPNPGCP displayed the highest enthalpy of the curing reaction associated with the ring-opening of benzoxazine, which was due to the effect of benzoxazine ring content per unit mass. Interestingly, the 5 wt% weight loss temperature and char residue after thermogravimetric test for poly(BAPNPGCP) were 8 °C and 7% higher than those of poly(BAPBACP). Meanwhile, the total heat release of poly(BAPNPGCP) was less than half of that for poly(BAPBACP), indicating the substantial effect of benzoxazine ring content on flammability and char formation. Furthermore, it was found that poly(BAPNCP) gave the best thermal stability and flame retardancy, which was due to the synergistic effect between naphthalene group and benzoxazine ring content. This study provides new insight into the curing behavior of benzoxazine and further understanding on the high performance of polybenzoxazine.     

A study of the transition of liquid-crystal alignment from homeotropic to planar on a polyimide layer

The alignment of nematic liquid crystals by rubbed polyimide surfaces has been well-studied and developed. A novel polyimide film which induced a homeotropic alignment of the nematic liquid crystal without rubbing or with weak rubbing strength was presented. However, there was a transition from homeotropic to planar alignment of the nematic liquid crystal after strong rubbing. In order to study the transition, the polyimide surface was investigated by atomic force microscopy, surface free energy measurement and angle-resolved analysis X-ray photo-electron spectroscopy before and after rubbing with a velvet fabric. It was found that both the change of surface polarity and surface morphology were not the reasons for the transition. The droop of the side chain on the polyimide surface after the rubbing treatment was detected by angle-resolved analysis X-ray photo-electron spectroscopy. Owing to the special structure of the novel polyimide, the X-ray photo-electron spectroscopy was successfully used for the first time to analyse the conformational change of the side chain of a polymer. In conclusion, the transition of nematic liquid crystal alignment from homeotropic to planar after rubbing was influenced by the side chain conformation of the polyimide.     

Development of dispersive liquid-phase microextraction based on new ionic liquid 1,3-diisooctylimidazolium hexafluorophosphate as solvent for the extraction and determination of dicofol and its degradation products in water samples

In the current paper we describe a novel sample preparation technique termed dispersive liquid-phase microextraction for the preconcentration and determination of 2,2,2-trichloro-1,1-bis(4-chlorophenyl)ethanol (dicofol) and its degradation products in water samples that includes 2-(2-chlorophenyl)-2-(4-chlorophenyl)-1,1-dichloroethene(2,4′-DDE), 1,1-dichloro-2,2-bis(4-chlorophenyl)ethane(4,4′-DDE) and 1,1,1-trichloro-2-(2-chlorophenyl)-2-(4-chlorophenyl)ethane (2,4′-DDT) coupled with gas chromatography mass spectrometry (GC-MS), in which a new ionic liquid 1,3-diisooctylimidazolium hexafluorophosphate abbreviated as [D(i-C₈)IM][PF₆] was used as extraction solvent. For each one extraction, 1.00 mL of the methanol solution containing 40 µL of the ionic liquid was sprayed into 25.00 mL of water sample. In the meantime the ionic liquid was finely dispersed into the aqueous phase and analytes were rapidly migrated into the ionic liquid. After the solution was centrifuged for 2 min at 5000 rpm, the droplets of the ionic liquid are subsided in the bottom of the conical test tube (30.0 ± 0.2 µL). Moreover, the factors relevant to extraction efficiencies were investigated and optimised including the volume of the ionic liquid, disperser solvent, extraction time, sample pH and ionic strength. Under optimal conditions, the enrichment factors of the extraction were between 550 and 725 with an extraction efficiency ranging from 66% to 87% for each different analyte. Finally, 1.0 µL of the ionic liquid collected from above extraction was injected into the injector block of GC-MS instrument for analysis. The detection limit (S/N = 3), the relative standard deviations for 2.0 µg L^?1 of the standard analyte (n = 5) and linearity in a calibration range were found to be 3–8 ng L^?1, 1.0–2.7% and 10–3000 ng L^?1, respectively. Good spiked recoveries over the range of 92.0–13.5% were obtained. The proposed method offers the advantages of simplicity of operation, rapidity, good extraction efficiency and enrichment factor; it has been successfully applied to determination of dicofol and its degradation products in environmental water samples.     

Biomimetic synthesis of calcium carbonate with different morphologies under the direction of different amino acids

Using three different amino acids (AAs) as organic matrices, including the highly nonpolar hydrophobic l-valine, the positively charged l-arginine and the less polar uncharged l-serine, calcium carbonate (CaCO₃) with different morphologies and polymorphs were synthesized by a facile gas diffusion reaction based on biomimetic strategy. Compared with the control cubic calcite obtained in the absence of AAs, the product from l-valine was cubic calcite aggregates assembled by nano-platelets. The product from l-arginine was spherical vaterite aggregates assembled by spherical nanoparticles. The product from l-serine was the mixture of cubic calcite and spherical vaterite. The structures and properties of the side chains of the AAs exerted the significant effects on the nucleation and growth of the CaCO₃. The formation mechanisms of the CaCO₃ in the presence of AAs are preliminarily discussed. The results suggest that the polymorphs and morphologies of the inorganic nanomaterials might be easily adjusted through the careful selection of the organic matrices.     

Excellent degradation performance of azo dye by metallic glass/titanium dioxide composite powders

The metallic glass/titanium dioxide powders (MG/TiO₂) with enhanced photocatalytic oxidation activity were synthesized, which exhibit a higher efficiency in decolorizing methylene blue solutions (MB). Compared with the pure TiO₂ and crystalline alloy/TiO₂ (CA/TiO₂) under the same circumstances, its degradation rate was 60 % and 30 % higher, respectively. Furthermore, compared with the CA/TiO₂, the MG/TiO₂ photocatalytic rate was three times faster when decolorizing MB. Considering the excellent intrinsic high-performance photocatalytic degradation under visible light irradiation, these novel powders were proven to have potential applications in water purification industry.     

Solid‐State Structural Transformations and Photoreactivity of 1D‐Ladder Coordination Polymers of PbII

An attempt has been made to design double‐stranded ladder‐like coordination polymers (CPs) of hemidirected Pb^II. Four CPs, [Pb(μ‐bpe)(O₂C‐C₆H₅)₂] ? 2H₂O ( 1 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐C₆H₅)₂(O₂C‐C₆H₅)₂] ( 2 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐p‐Tol)₂(O₂C‐p‐Tol)₂] ? 1.5 H₂O ( 3 ) and [Pb₂(μ‐bpe)₂(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 4 ) (bpe=1,2‐bis(4′‐pyridyl)ethylene), have been synthesised and investigated for their solid‐state photoreactivity. CPs 2 – 4 , having a parallel orientation of bpe molecules in their ladder structures and being bridged by carboxylates, were found to be photoreactive, whereas CP 1 is a linear one‐dimensional (1D) CP with guest water molecules aggregating to form a hydrogen‐bonded 1D structure. The linear strands of 1 were found to pair up upon eliminating lattice water molecules by heating, which led to the solid‐state structural transformation of photostable linear 1D CP 1 into photoreactive ladder CP 2 . In the construction of the double‐stranded ladder‐like structures, the parallel alignment of C?C bonds in 2 – 4 is dictated by the chelating and μ₂‐η²:η¹ bridging modes of the benzoate and toluate ligands. The role of solvents in the formation of such double‐stranded ladder‐like structures has also been investigated. A single‐crystal‐to‐single‐crystal transformation occurred when 4 was irradiated under UV light to form [Pb₂(rctt‐tpcb)(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 5 ).