氯化聚乙烯对甲基丙烯酸甲酯／苯乙烯共聚动力学的影响

将甲基丙烯酸甲酯（ＭＭＡ）／苯乙烯（Ｓ）在氯化聚乙烯（ＣＰＥ）存在下进行悬浮溶胀接枝共聚，考察了ＣＰＥ对ＭＭＡ／Ｓ共聚动力学行为的影响．ＣＰＥ提高了聚合体系的粘度，使自动加速提前，扩散因素增加，对共聚有阻滞作用．ＣＰＥ是链转移剂，使ＭＭＡ／Ｓ共聚物分子量降低．ＣＰＥ对ＭＭＡ的吸附渗透优于对Ｓ的吸附，造成接技部分与非接技部分组成的差异．ＣＰＥ含量、溶胀时间、转化率、硫酸用量对共聚组成均有影响。     

（PdCl2—PVP）／Al2O3催化剂中Pd状态的探讨

氯化钯先锚定在聚乙烯吡咯烷酮上后进一步负载到Al_2O_3上所制的催化剂[简称(PdCl_2-PVP)/Al_2O_3]是一种活性、选择性高,稳定性好的烯烃、二烯烃和多烯烃加氢催化剂。本文结合加氢反应,使用XPS、FT-IR、电镜及用CO为探针的FT-IR,对这种催化剂进行了考察。实验说明,在这种催化剂中,钯的价态是在0—2之间。红外光谱在486cm~(-1)处有一微弱的小峰,说明存在Pd—N的配位键。催化剂中钯含量低时(0.2wt％)稳定性好,不吸附CO,活性中心是络合钯原子;当钯含量较高时(0.7wt％),催化剂的初活性虽不低,稳定性却较差,这种催化剂能吸附CO,IR谱图上仅在1919cm~(-1)处有CO桥式吸附态的伸缩振动。表明除络合钯原子外,还有聚集的钯金属存在。FT-IR尚表明,PVP在Al_2O_3上可能并非单纯的物理吸附。电镜结果表明,PVP在Al_2O_3上呈30—70(?)的微球状,(PdCl_2-PVP)/Al)_2O_3上的(PdCl_2-PVP)亦呈微球状,与前者无明显区别,这种催化剂中其活性中心是络合钯原子。     

HMS和NaY固载酒石酸钛配合物的研究

利用化学键合和“瓶中造船”方法,成功地将酒石酸钛配合物接枝到HMS(heragonal mesoporous silicas)上或包络合于微孔NaY内.FT-IR表征表明酒石酸钛在HMS上是通过与载体表面羟基发生交换作用而被固载的;在NaY载体上则是通过包络合被封装在载体的超笼内.UV-Vis可见漫反射表征表明两类固载型催化剂有着相似的钛配位环境.在催化肉桂醇环氧化反应中,HMS键合型催化剂的反应转化率比NaY包络型催化剂的高;但后者在环氧化选择性上要高于前者.回收样品的重复使用实验结果表明,两类固载型催化剂在重复使用过程中均存在不同程度的失活.     

Morphological and Structural Studies of sPS/aPS Blends

Inrecentyears,thenewsedricrystallinepolymersyndiotacticp0lystyrene(sPS)hasat-ITactedmuchattentionduetoitsg0odchendcalresistanceandenhancedmechanicalperformanceatelevatedtemPeratUre.'H0wever,itexhibitshighbrittlenessandpoorimPact-resistanceandtCar-resistance.2Therefore,itisnecessarytomodifyitwithtougheningpolyIners.AsimPlemeth0dto0verc0methedriscibilityofatwo-phaseblendofsPSandatougheningpolymristotwrovetheinterfacialaffmity,wheretheadditionofablockcoP0lymerisconsideredtobemosteffective.3…     

Fe-Co-Ni合金纳米线有序阵列的模板合成与磁性

以二次阳极氧化的氧化铝膜为模板，用电化学沉积的方法成功地合成了Fe-Co-Ni三组份有序纳米线阵列.扫描电子显微镜（SEM）和透射电子显微镜(TEM)观察表明纳米线表面光滑、有序、高长径比；磁性测量表明,其矫顽力较同组份的膜材料有较大的提高.将样品在惰性气体氛围中不同温度下退火，随着退火温度增加，其纵向矫顽力有一个极值，而对应的横向矫顽力没有类似的变化，关于这一现象的机理,本文进行了初步的讨论. 图5参15     

Preconcentration of copper with multi-walled carbon nanotubes pretreated by potassium permanganate cartridge for solid phase extraction prior to flame atomic absorption spectrometry

A procedure for the preconcentration of copper was described in this paper using multi-walled carbon nanotubes (MWCNTs) oxidized by potassium permanganate as the adsorbent for the enrichment of trace copper in water samples. Important parameters, such as the sample pH, the concentration and volume of eluent, sample flow rate and volume, and interference of coexisting ions, were investigated. The obtained results indicated that proposed method possessed an excellent analytical performance. The linear range, the detection limit, and precison (RSD) were 1-100 ng/mL (R2 = 0.9993), 0.32 ng/mL and 2.88%, respectively. The results showed that copper could be adsorbed quantitatively on the pretreated MWCNTs with potassium permanganate, and proposed method was very useful in the monitoring of copper in the environment.     

Facile solvent-free synthesis of pure-phased AlN nanowhiskers at a low temperature

Pure hexagonal aluminum nitride (AlN) nanowhiskers have been successfully synthesized by directly reacting AlCl₃ with NaN₃ in non-solvent system at the low temperature of 450 °C for 24 h. The obtained products are characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy and selected area electron diffraction, which show that the obtained products are hexagonal phase AlN nanowhiskers with width from 10 to 80 nm and length up to several micrometers. The influencing factors of the formation of AlN nanowhiskers were discussed and a possible growth mechanism for AlN nanowhiskers was proposed. Additionally, the study on the corresponding optical properties and catalytic properties is also carried out.     

Preparation ,Structural Characterization and Luminescent Property of Binucleasr Silver（Ⅰ）Complex Formed by Benzotriazole and 1—Hydroxymethyl Benzotriazole

Dinuclear silver (I) six‐membered ring complex [Ag₂ (bta)₂ ‐(hmbta)₂] (ClO₄)₂ (3) has been synthesized by the reaction of benzotriazole (bta) (1) and 1‐hydroxymethyl benzotriazole (hmbta) (2) with Ag (CH₃CN)₄ClO₄. The structures of compound 2 and Complex 3 have been studied by single crystal X‐ray diffraction analysis. The change of luminescent intensity of 1, 2 and 3 was reported. Compound 2 crystallizes in the monoclinic system with space group P2 (1)/c, a = 0.7655 (10) nm, b = 1.0126 (14) nm, c =0.9502 (13) nm, β = 95.07 (2)°, V = 0.7337 (17) nm³ and Z = 4. Complex 3 crystallizes in the triclinic system with space group P1, a = 0.73611 (18) nm, b = 0.9152 (2) nm, c = 1.2277 (3) nm, β = 87.170 (5)°, V = 0.8221 (3) nm³ and Z = 1. The main structural feature of complex 3 is a symmetric dinuclear six‐membered ring formed by two silver (I) atoms and four N‐atoms from two benzotriazoles. The second structural feature of complex 3 is the τ‐τ stacking interaction between two adjacent molecular planes, which forms the two‐dimentional layer structure. Besides, compared with 2, the luminescent intensity of complex 3 shows a remarkable enhancement.     

新型化合物[Ni(en)3]2[Ni(en)2(H2O)2][As6V15O42]·4H2O晶体的水热合成与表征

金属氧酸盐因其在医药临床、工业催化、功能材料等方面的广泛应用而引起人们的关注[1～6], 其中, 有关钒化学的研究一直很活跃, 钒具有与钼、钨明显不同的结构特性, 钒可以采取VO4, VO5和VO6方式配位, 同时, 钒的价态可以是+3, +4和+5价. 由于钒可采取多种配位方式及多种价态, 与钼酸盐和钨酸盐相比, 钒酸盐更具有结构柔顺性, 同时易形成低价或混合价态物种.在以往的文献中, 有关P-V-O体系多金属氧酸盐的水热合成的研究已有大量的报道[7], 在常规溶液合成中, 人们已对As-V-O体系进行了相对深入的研究, 而有关水热合成的研究报道却很少, 已见报道的砷钒化合物有K6*6H2O[8,9], 4-[10], 6-[11](X=SO2-3, SO2-4, H2O). 为了探究水热条件下As-V-O体系的反应特性, 我们开展了这方面的研究工作, 并取得了突破性进展. 本文采用中温水热技术合成了含有机基团的砷矾超分子化合物2**4H2O, 探讨这类化合物的非线性光学性质、催化性质及其它功能特性将是一个非常有意义的研究领域.     

Photolysis of gamma-(alpha-carboxy-2-nitrobenzyl)-L-glutamic acid investigated in the mcrosecond time scale by time-resolved FTIR

The photolytic release of substrates from caged substrates has proven to be an excellent method to generate concentration jumps for kinetic measurements in the microsecond time scale. In this report we use time-resolved FTIR in the step-scan mode to probe the photolysis mechanism of one such caged compound, namely gamma-(alpha-carboxy-2-nitrobenzyl)glutamate, and to obtain a direct measure of the rate of photorelease of the substrate glutamate. The time-resolved difference FTIR spectra exhibit specific signals that can be assigned to the reactant caged glutamate, photolytically released product glutamate, as well as to the aci-nitro intermediate, the key intermediate of the photolysis reaction. Therefore these signals allow the characterization of the kinetics of formation and decay of the intermediate and products. This is the first such report that provides a direct determination of the rate of formation of the photolysis product from a caged compound in the microsecond time scale. Furthermore, the results presented provide a good basis for further time-resolved FTIR studies of molecular reaction mechanisms, such as ligand protein interactions, in the microsecond time scale through the photolytic release of substrates from caged compounds.