An Improved S-Random Interleaver Design for Turbo Code Based on Chaos Model

A new method to design interleaver based on Henon chaos model is presented. The designed interleaver is with rather random behavior. Experimental results show that the proposed S-henon interleaver make a magnitude of im provement in bit error rate （BER） performance by 0.4 dB compared with the S-random interleaver for AWGN channel respectively. The S-henon interleaver may be adapted to 3G mobile communication systems.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

牛顿环实验中的误差分析

本文对牛顿环测透镜曲率半径实验中引起误差的各种原因进行分析讨论，指出了误差的主要来源及比较完善可行的处理方法。     

资源共享方式若干问题的研讨

社会公用服务系统和工程技术系统，存在共同的资源共享问题。本文通过典例就资源共享方式的若干问题加以探究：讨论广义的多用户系统中人工资源共享方式的分类；阐述常用的共享方式的特点、优缺点；分析系统时间性能及其改进与共享方式的关系等。文章还提出在系统工程范畴里，应对社会公用服务和工程技术两类系统的资源共享方式予以综合研究，并相互借鉴和移植。     

浅议物理实验教学环节改革

为进一步提高大学物理实验的教学质量，本文就实验课的预习、操作、实验报告的撰写及考核方法进行了探讨。     

The multi-symplecticity of partitioned Runge-Kutta methods for Hamiltonian PDEs

In this article we consider partitioned Runge-Kutta (PRK) methods for Hamiltonian partial differential equations (PDEs) and present some sufficient conditions for multi-symplecticity of PRK methods of Hamiltonian PDEs.

     

一类时变需求且存货影响销售率的EOQ模型

从实际背景出发,在R AM P型需求和存货影响销售率条件下,讨论了一类以缺货开始的变质性物品的EOQ模型.给出了模型的求解方案及单位时间内平均利润最大化的两个充分条件,并用数值算例进行了验证.     

分子筛负载HPA/TiO2催化剂的性能

报道了分子筛负载杂多酸和二氧化钛催化剂MS／HPA／TiO2的制备及其对品红溶液降解的效果，系统研究了催化品红溶液降解的优化条件。实验表明，MS／HPA／TiO2具有良好的催化活性且容易回收。当MS：HPA：TiO2=1：10：1，品红的浓度为0．005％（10mL），催化剂的用量为10mg，反应时间为10min，品红的降解率达到96．87％。     

基于层面信息的路径优化

根据分层物体快速成型（LOM）中零件逐层累积的特点，从缩短加工时间、提高制件效率方面着手阐述了路径优化的必要性，针对LOM机的运动机理和软件数据结构，给出了扫描路径优化的原理，将图论中的便宜算法用于LOM机的扫描路径优化。     

永磁同步直线电机弱磁调速时的设计

从凸极率角度出发，对内部磁极结构电机提出了新的设计方法，为使电机的特性具有可比性，假设电机均运行于相同的基值点，并采取相同的控制策略，着重了研究凸极率（ld/lq)对电机最大可能速度，逆变器功能（VA）和电流控制特性的影响，所得结论对电机及其驱动系统的选择和有积极的参考指导作用。