剃齿时齿形中凹现象的形成机理

本文综合啮合原理、微分几何和弹性力学的基础理论,对剃齿过程中刀具齿面和被剃齿轮齿面间的失配进行了分析。最后利用径向力求出了齿面间的压切量,从而解释并验证了剃齿过程中产生的齿形中凹现象。这对提高剃齿精度、降低噪音有着重要意义。     

长春市主要广场城市森林结构的研究

通过样地调查对长春市主要广场的城市森林结构进行分析得出：广场森林的密度为160株／hm^2，广场共有乔木树种52种，花灌木30种。树木的平均胸径为21．6cm，树木的总叶面积为739172．8m^2，叶面积指数为1．2，广场森林总生物量为5174．2t，Shannon-Wiener指数平均为1．7。从以上分析可以看出长春市主要广场园林植物种类丰富，并已达到森林水平可以发挥出很大生态效益。     

Surface characterization of fluorinated polymers (PTFE, PVDF, PFA) for use in ultratrace analysis

Surface characterization of new unused PTFE, PFA and PVDF labware has been carried out by light microscopy, scanning electron microscopy, profilometry and atomic force microscopy. It has been found that in spite of higher micro-roughness, PFA exhibits the lowest nano-roughness and hence seems best suited as vessel material for relatively mild pressureless chemical operations for sample preparation of ultrapure substances, as container material for storage of ultrapure liquids, and for transport of such liquids, e.g., from the producer in the chemical to the end user in the microelectronics industry. This suitability refers only to the surface quality of the investigated materials. PTFE-surfaces, due to the sintering process of production, exhibit the most unfavourable surface quality of the investigated fluorinated polymers.     

合成丙交酯中微量水分分析

合成丙交酯中微量水分分析徐溢，柳胜春（重庆大学化工学院分析教研室６３００４４）关键词丙交酯，微量水，定量分析丙交酯是人工合成骨材料聚乳酸的合成中间体，其性能决定着合成产品的品质，要获得高质量的合成材料，对中间体的分析和监测十分重要。一般要求丙交酯中间...     

反气相色谱法研究聚丙烯结晶动力学及对熔点和结晶度的测定

<正> 研究聚合物的结晶动力学,过去大多采用膨胀计法和解偏振光法。曾有文献报道采用反气相色谱法测得聚乙烯等温结晶线。通过实验可知,测定聚丙烯结晶度时,试样热历史和测定前陈化温度的选择均影响测定结果。此外在测定聚丙烯试样的熔点时,保留图中出现了两个转折,经反复实验证实:此两转折对应于聚丙烯中不同晶形(α-、β-形)的熔点。     

Molecular dynamics studies on octadecylammonium chloride at the air/liquid interface

Molecular dynamics simulations on surfactant octadecylammonium chloride at the air/liquid interface were performed. It was found that the alkyl chains of octadecylammonium would change to order with increasing the concentration of octadecylammonium at the air/liquid interface. Some functions, such as the concentration distributions, the radial distribution function and the mean squared displacement (MSD) were evaluated to investigate the structural properties of interface. We found that the salts can affect octadecylammonium aggregate at the interface: (1) univalent ions, such as chloride and sodium ions, affect slightly the structure of monolayer and (2) bivalent ions, such as sulfate or calcium ions, affect greatly, especially for the bivalent negative ions.     

MCM-41-supported bidentate phosphine palladium(0) complex: a highly active and recyclable catalyst for the Sonogashira reaction of aryl iodides

The first MCM-41-supported bidentate phosphine palladium(0) complex has been prepared. This complex is a highly efficient catalyst for Sonogashira reaction and can be reused at least 10 times without any decrease in activity.     

Microwave-Assisted Soluble Polymer-supported Synthesis of Peptoids

Libraries of peptide-like compounds are attractive sources of binding agents for proteomics applications. The synthesis of oligomeric combinatorial libraries of peptidomimetics is usually more straightforward than the creation of large libraries of more "drug-like" molecules. Herein we report synthesis of peptoids on soluble high loading Noncross-linked polystyrene. The synthesis route consists of: (a) preparation "soluble wang resin" from non-crosslinked polystyrene and 4-hydroxybenzyl alcohol via ether linkage, (b) an esterification step performed by the addition of bromoacetyl bromide to "soluble wang resin" and (c) a nucleophilic displacement of bromide with a primary amine.     

On-line preconcentration of arsenic from water samples with an anion-exchanger column coupled to a hydride generation ICP system

Summary An on-line anion-exchange preconcentration hydride generation ICP system for the determination of total inorganic arsenic in water is described. The column was packed with strongly basic anion-exchange resin (AG 1-X8). Experimental conditions including pH of the sample solution, eluent, flow rate of eluent, oxidation states of arsenic and competing anion ions were studied. Compared with the conventional continuous hydride generation ICP, a 9.2-fold improvement in sensitivity was obtained with RSD 1–2% at 100 ng/ml. The detection limit (3) was 0.08 ng/ml. The recoveries in water samples were satisfactory. The system provides complete automation of sample loading, eluting and regenerating of the resin.On leave from Shanghai Institute of Metallurgy, Chinese Academy of Sciences, Shanghai, China 200050