Designing Covalent Organic Frameworks with a Tailored Ionic Interface for Ion Transport across One-Dimensional Channels

A strategy based on covalent organic frameworks for ultrafast ion transport involves designing an ionic interface to mediate ion motion. Electrolyte chains were integrated onto the walls of one-dimensional channels to construct ionic frameworks via pore surface engineering, so that the ionic interface can be systematically tuned at the desired composition and density. This strategy enables a quantitative correlation between interface and ion transport and unveils a full picture of managing ionic interface to achieve high-rate ion transport. Moreover, the effect of interfaces was scaled on ion transport; ion mobility is increased in an exponential mode with the ionic interface. This strategy not only sets a benchmark system but also offers a general guidance for designing ionic interface that is key to systems for energy conversion and storage.     

腐蚀对风车联合作用下斜拉桥拉索 疲劳可靠性的影响分析

为探讨腐蚀对随机交通和风载联合作用下斜拉索疲劳可靠性的影响规律和机理,通过拉索高强钢丝的加速腐蚀和疲劳试验,提出了考虑腐蚀的斜拉索疲劳抗力模型;基于线性累积损伤准则,建立了考虑腐蚀影响的风车联合作用下拉索疲劳可靠性的分析方法和流程;依托工程实例,分析了腐蚀等级和时变腐蚀对拉索疲劳可靠性的影响.结果表明:随腐蚀加剧拉索动态疲劳可靠指标下降速率增大;等级达到Ⅲ级及以上的腐蚀对拉索疲劳可靠寿命影响显著,尤其对于靠近桥塔及辅助墩处拉索;Ⅳ级和Ⅴ级腐蚀时拉索疲劳寿命相对无腐蚀状况降幅最大分别达24%和44%;相对完好状况,时变腐蚀影响下拉索的动态疲劳可靠指标下降更为迅速,且降幅明显大于仅考虑腐蚀分级的状况.     

Polypyrrole Shell@3D‐Ni Metal Core Structured Electrodes for High‐Performance Supercapacitors

Three‐dimensional (3D) nanometal films serving as current collectors have attracted much interest recently owing to their promising application in high‐performance supercapacitors. In the process of the electrochemical reaction, the 3D structure can provide a short diffusion path for fast ion transport, and the highly conductive nanometal may serve as a backbone for facile electron transfer. In this work, a novel polypyrrole (PPy) shell@3D‐Ni‐core composite is developed to enhance the electrochemical performance of conventional PPy. With the introduction of a Ni metal core, the as‐prepared material exhibits a high specific capacitance (726 F g^?1 at a charge/discharge rate of 1 A g^?1), good rate capability (a decay of 33 % in C_sp with charge/discharge rates increasing from 1 to 20 A g^?1), and high cycle stability (only a small decrease of 4.2 % in C_sp after 1000 cycles at a scan rate of 100 mV s^?1). Furthermore, an aqueous symmetric supercapacitor device is fabricated by using the as‐prepared composite as electrodes; the device demonstrates a high energy density (≈21.2 Wh kg^?1) and superior long‐term cycle ability (only 4.4 % and 18.6 % loss in C_sp after 2000 and 5000 cycles, respectively).     

铸造工艺仿真设计前处理及过程处理应用技术

以应用ProCAST和MAGMAsoft 2款软件为例，针对铸造工艺仿真设计前处理和过程处理每个环节的主要内容与使用方法进行了较为详细地归纳、分析和总结。提出了处理过程的技术路线，并系统地介绍了每项应用内容的操作平台与使用步骤，从而为高效地应用铸造工艺仿真设计提供理论和技术支持。     

多铰接结构的现代无轨列车路径跟随研究

现代无轨列车是一种新型公路运输车辆,其融合了汽运车辆建设成本低和轨道车辆载运量大的技术优势.针对多铰接现代无轨列车车体编组多,运动自由度大,曲线路径行驶时后方车辆会偏离前方车辆的运动轨迹的问题,建立了跟随误差模型,分析影响路径跟随性的因素,提出一种曲线路径行驶的路径跟随策略.采用航向角预测跟随控制策略,设计中间车轴的铰接角和后车轴的转向角控制规律,以增量PID算法补偿阿克曼转向模型误差,提高系统稳定性.最后在圆曲线路径和"S"曲线路径工况下测试车辆各轴的行驶轨迹.仿真结果表明:车辆的位置跟踪误差保持在0.03 m以内,航向跟踪误差最大在4.5°以内,车辆具有较好的路径跟随性能.     

我国SNS营销现状与发展趋势研究

从SNS营销内涵、营销工具、营销策略和营销评价等方面对有代表性的文献成果进行了分析,揭示了我国SNS营销的研究进展,探讨了我国SNS营销的发展趋势,包括SNS营销认识动态化、商务智能方法和社交平台结合深入化、营销策略微观化、评价思路多元化.     

高校体育教师掌握运动伤害急救能力的困境及对策

针对近年频发的大学生运动伤害事故,从高校体育教师的角度,对体育教师掌握运动伤害急救理论知识、运动伤害急救技能以及立法的缺失进行了探讨,并提出了相应的对策.     

半潜式钻井平台螺旋桨修复技术的应用研究进展

针对半潜式海洋钻井平台推进器螺旋桨面临的空泡腐蚀、电化学腐蚀以及海洋生物附着污损等问题，综述了焊接、粘接、热喷涂、冷喷涂修复技术的应用研究进展。认为目前的螺旋桨修复再制造技术普遍存在着修复层应力集中、结合强度低、孔隙率高、高温导致材料变性等缺陷，今后的研究工作应向着避免应力集中、增大修复层结合强度、降低作业温度、减小孔隙率的方向发展，以期能够制备更加致密均匀的修复层。     

海上电泵结蜡井热循环洗井工艺参数优化设计

为探索海上油田电泵举升结蜡井热循环洗井工艺井筒温度场分布规律，综合考虑潜油电机增温、电缆散热、热流体注入量、注入深度、注入温度、结蜡管段传热和海水空气导热的影响，基于热能守恒原理，建立了电泵井结蜡热循环洗井工艺井筒温度场计算模型，分析了热流体注入温度和注入量对混合产出流体的井筒温度分布的影响。研究结果表明，随着注入量的增加混合产出液沿程井筒温度增加，随着注入温度的增加混合产出液沿程井筒温度增加。该方法可有效指导现场措施工艺的实施，达到延长结蜡井的清蜡周期、延缓产液/产油量下降速度的目的。