聚苯胺-富勒烯复合膜的光电响应

通过溶液共混方法制备了聚苯胺（PANI）-富勒烯复合膜, 并用IR、XRD、UV-Vis等技术对其进行表征.红外光谱表明聚苯胺与C60之间存在相互作用且表现为掺杂态聚苯胺红外谱图样.X射线衍射表明复合体材料的结晶性能增强.光致发光谱表明聚苯胺与C60分子之间存在有效光诱导电荷分离现象.光电响应实验表明复合体薄膜的光吸收增强, 光电流增大, 说明聚苯胺-富勒烯复合膜受光照射后发生了光诱导电荷分离现象, C60掺杂聚苯胺有助于改善光伏特性.     

A New Biochemical Way for Conversion of CO2 to Methanol via Dehydrogenases Encapsulated in SiO2 Matrix

CO2 is converted to nethanol through an enzymatic approach using formate dehydrogenase(FateDH),formaldehyde dehydrogenase(FaldDH）and alcohol dehydrogenase(ADH)coencapsulated in silica gel prepared by modified sol-gel process as catalysts,TEOS as precursor,NADH as an electron donor.The highest yield of methanol was up to 92.1% under 37℃,pH7.0 and 0.3Mpa.     

利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…     

表面活性剂对纤维素接枝共聚物溶液粘度性质的影响

研究了阴离子十二烷基硫酸钠(SDS)、阳离子十六烷基三甲基溴化铵(CTAB)和非离子聚乙二醇辛基苯基醚(OP)等三种不同类型的表面活性剂对疏水化水溶性两性纤维素接枝共聚物(CGAO)溶液粘度性质的影响.结果表明,在SDS和OP的临界胶束浓度(cmc)附近，CGAO溶液粘度最大，SDS引起CGAO粘度的变化大于OP；即使在CTAB的cmc附近，随着CTAB浓度的增加，CGAO的粘度一直呈下降趋势；非疏水改性的纤维素接枝共聚物的溶液粘度随SDS或CTAB浓度的增加而下降，但几乎不随OP浓度的增大而变化.此外，通过凝胶渗透色谱法测得的保留时间证实了SDS、CTAB和OP与CGAO之间的疏水缔合作用.     

褪黑激素受体拮抗剂的三维定量构效关系研究

采用两种分子场分析方法即比较分子场分析法（CoMFA）和比较分子相似因子分析法（CoMSIA）进行了37个褪黑激素受体拮抗剂的构效关系研究.计算结果表明，两种方法得到的构效关系模型都具有较好的预测能力.在计算中，还考察了不同格点距离和电荷计算方法对构效关系模型的影响.通过分析分子场等值面图在空间的分布，可以观察到叠合分子周围分子场特征对化合物活性的影响，为设计新的褪黑激素拮抗剂提供了一些理论依据.     

A Novel Octahedral Hexasilver(I) Cluster: Ag_6[SSCN(n-C_4H_9)_2]_6

ＣｏｍｐｏｕｎｄｓｆｏｒｍｅｄｆｒｏｍＣｕ ,ＡｇａｎｄＡｕｗｉｔｈｄｉｔｈｉｏ ｌａｔｅｌｉｇａｎｄｓ ,ｓｕｃｈａｓｔｈｅｄｉａｌｋｙｌｄｉｔｈｉｏｃａｒｂａｍａｔｅ (ＤＴＣ) ,ｍｅｒｃａｐｔｏｔｈｉａｚｏｌｉｎｅ (ＨＭＴ)ａｎｄｄｉａｌｋｙｌｄｉｔｈｉｏｐｈｏｓｐｈａｔｅｓ(ＤＤＰ) ,ｈａｖｅｐｌａｙｅｄａｎｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｔｅｃｈｎｏｌｏｇｙ .1Ｃｕ(Ｉ) Ｓｃｌｕｓｔｅｒｓａｌｓｏｈａｖｅｂｅｅｎｉｍｐｌｉｃａｔｅｄｉｎｂｉｏｌｏｇｙａｓａｎ ｔｉ ｏｘｉｄａｎｔｓ .2Ｔｈｅｃｕｂａｎ…     

大型液相色谱分离过程FAD－SMT数学模型及其数值解

提出大型液相色谱分离过程ＦＡＤ－ＳＭＴ数学模型，把色谱分离连续性方程转变为对流扩散方程和常微分方程组，并提出模型的数值方法，分析了数值解的稳定条件和收敛条件以及空间和时间步长的选取。实验结果表明，ＦＡＤ－ＳＭＴ数学模型计算的液相色谱分离葡萄糖、果糖和分离甘露醇、山梨醇理论与实验流出曲线相吻合。灵敏度分析结果表明：相平衡常数比轴向扩散系数和总传质系数对色谱分离有较大的影响。     

利用差异衍生同步分析醛糖和酮糖

建立了一种可同时对醛、酮糖进行精确定性和定量分析的方法。以肌醇作为内标，用80％乙醇超声提取，利用醋酸酐和HMDS＋TMCS（1：3）进行差异衍生，在EI源下用SIM模式进行GC／MS分析。结果表明：11种标准单糖在1—4mg／L范围内线性良好；仪器检出限：醛糖在8．15—22．4μg／L之间；酮糖为2．32μg／L和3．47μg/L；高、中、低3个量的平均回收率在73．0％-95．7％，相对标准偏差在3．1％-10．0％。对枸杞游离单糖进行测定，各单糖含量分别在0．26—368．6mg／g。该方法弥补了以前单糖分析中的缺陷，对既含有醛糖又含有酮糖的样品可同时进行精确的定性定量分析。     

Nickel-promoted ligand-free palladium-catalyzed Suzuki coupling reaction

Summary A Ni-promoted ligand free palladium catalyst system for Suzuki coupling of aryl bromides has been developed in high efficiency under mild reaction conditions. It was obtained in situ by introducing NiCl₂ to PdCl₂/PVP using a parallel high-throughput screening technique. A wide range of aryl bromides bearing a variety of functional groups was evaluated.     

Solution-phase synthesis and electrochemical hydrogen storage of ultra-long single-crystal selenium submicrotubes

Ultra-long single-crystalline trigonal selenium submicrotubes were synthesized using a facile one-step solution-phase approach with the assistance of nonionic surfactant Polyoxyethylene(20)sorbitan monolaurate (Tween-20), which turned out to be significant for the formation of ultra-long Se submicrotubes. XRD, Raman, SEM, and TEM were adopted to characterize the morphology, structure and phase composition of the as-prepared Se products. It was found that the length of the obtained Se submicrotubes was over 100 microm. By variation of the experimental parameters, the t-Se spheres, nanowires, and broken microtubes can be prepared. The possible growth mechanism of the ultra-long selenium submicrotubes was explained. In addition, we have also demonstrated that the synthesized ultra-long t-Se submicrotubes using the Tween-20-assisted approach can electrochemically charge and discharge with the high capacity of 265 mAh/g (corresponding to 0.97 wt % hydrogen in SWNTs) under normal atmosphere at room temperature. Cyclic voltammetry was adopted to investigate the adsorption-oxidation behavior of ultra-long selenium submicrotubes. It was observed that the morphology of the synthesized selenium products had a remarkable influence on their capacity of electrochemical hydrogen storage. These differences in hydrogen storage capacity are likely due to the size and density of tubes as well as the microcosmic morphology of different Se samples. The as-obtained ultra-long Se submicrotubes are expected to find wide applications in hydrogen storage, high-energy batteries, and optoelectronic, biologic, and catalytic fields as well as in the studies of structure-property relationships. This simple Tween-assisted approach might be extended to the preparations of one-dimensional nanostructures of tellurium and other anisotropic materials.