一类非线性单调型方程的区域分裂法

本文考虑了一类非线性单调问题的加性Schwgrz交替法和异步平行算法,并得到了在能量模意义下的收敛性结果,最后还讨论了格式的有限元离散。     

转台轴线标定及综合标定矩阵的生成——用于三维计算机视觉系统

提出利用标定平面的两个角度可交出转台轴线,通过交出的轴线,标定出光-象平面轴线的关系,并给出测量点通过平移、旋转再进入标定矩阵的一个新的转换矩阵。     

环形光纤延迟线高速脉冲串发生器的理论分析与设计原则

本文对用环形光纤延迟线产生高速光脉冲串的方法进行了理论分析,制定了一整套有关参数的计算和测试方法,并提出了整个系统的设计原则.     

环氧乙烷四氢呋喃共聚醚[P(E-CO-T)]的研制

研究了环氧乙烷与四氢呋喃的共聚.使用BF_3络合物为催化剂,1,4-丁二醇为共催化剂.找到了溶液聚合和本体聚合适宜的工艺条件.在此条件下,环齐聚物的生成量为8％左右.找到了方便易行的纯化方法,通过纯化可把聚醚的环齐聚物含量降到1％以下,有效地提高了产品的质量。     

新的基团法估算沸点下蒸发焓

提出了估算沸点下蒸发焓的含基团重量分率的基团法和估算式，拟合团贡献值，对３８５种有机物的计算平均偏差约为１．５％。所提出的新方法明显优于３种对应状态和用蒸发熵的基团法。     

矿区铁路专用线下综采放顶煤开采的试验研究

介绍了国内第一个综采放顶煤开采矿区铁路线下压煤试验面的成功经验，总结了试采中对铁路所采取的各种分析和维护措施，分析了该采煤方法下的地在移动和变形特点，为我国“三下”采煤领域提供了具有特色的成功实例。     

γ-LiAlO2晶体生长、改性和热学性质研究

采用快速提拉法生长出了透明、完整的γ-LiAlO2晶体,但是晶体的高熔点和易挥发性限制了γ-LiAlO2晶体质量.采用气相传输平衡法(vapor transport equilibration technique,VTE)工艺对晶体改性,半高宽(FWHM)值从116.9arcsec降至44.2arcsec,继续升高VTE处理温度至1300℃,FWHM值反而升高至55.2arcsec.快速提拉法生长出来晶体,[100]方向和[001]方向的热膨胀系数分别为17.2398×10-6/K,10.7664×10-6/K.经过三步VTE处理后[100]和[001]方向热膨胀系数降至16.6539×10-6/K和10.1784×10-6/K.     

Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007