The stimulatory effect of heavy metal cations on proliferation of aortic smooth muscle cells

Heavy metal cations Cd2+, Pb2+, and Hg2+ were added to substitute for Ca2+ in culture media to study their effect on the relationship between CaM and the proliferation of cultured rabbit aortic smooth muscle cells (ASMC). It was found that all the heavy metal cations studied stimulated the proliferation of ASMC in varying degrees, increased the CaM content in cells at late G1 stage and decreased the activity of cAMP PDE. These results suggest that the adverse effect of heavy metals may be related to the pathogenesis of atherosclerosis and hypertensive disease.     

震区中小跨径桥梁墩柱配筋率取值范围

为研究配筋率对钢筋混凝土桥梁延性抗震性能的影响,并在不同设防烈度对主筋配筋率的合理取值进行细分。以钢筋混凝土桥梁为研究对象,通过拟静力模型试验与有限元数值分析的方法,研究竖向钢筋(主筋)配筋率对桥墩延性的影响,提出典型桥墩的多级性能水平量化指标;并探究在氯离子侵蚀的恶劣环境下,不同配筋率对桥梁抗震性能所带来的影响,从而对氯离子侵蚀环境下的震区中小跨径桥梁墩柱配筋率取值范围提供参考建议。结果表明：考虑氯离子侵蚀作用下的恢复力模型能够较好地反映刚度的退化特性,墩柱的最佳配筋率取值范围为1.11%～2.72%;当加速度为0.3g(g为重力加速度)时,仅从配筋率的角度已无法满足墩柱的损伤指标,建议采用减隔震体系进行抗震设计,如采用延性体系时配筋率不得小于2.64%。研究结果可为中小跨径连续桥梁抗震设计提供参考。     

数据驱动下交通异常行为的双层识别模型

为实现对车辆异常行为的准确识别,提高车辆行驶的安全性,提出了一种基于支持向量机(support vector machine, SVM)、监督学习与长短期记忆(long short term memory, LSTM)深度学习的交通异常驾驶行为双层识别模型。首先,对车辆轨迹数据筛除和滤波,构建异常行为数据集;其次,从异常行为轨迹特征中提取出特定异常行为的特征标签,并人为标定在训练集中;再次,构建SVM模型对训练集进行粗识别,基于SVM的二分法原理,从测试集中筛选出异常行为;最后,通过LSTM时间序列模型构建具体种类的异常行为模型,并通过深度学习的方法,从异常行为数据中细分为蛇形驾驶、急速变向、侧滑、大半径转弯、快速U型转弯、急刹车等具体的异常驾驶行为。本次实验选用下一代仿真(next generation simulation, NGSIM)数据中US-101高速公路和peachtree城市道路的数据集的轨迹数据验证SVM和LSTM双层识别模型的性能,包括均方根误差、识别准确率等。结果表明,构建的双层识别模型在第一层有98%的识别准确率,第二层有超过80%的识别准确率,可以较为准确地识...     

回流充气法处理中,高量含铁地下水的研究

本文介绍一种深井回流充气工艺,它兼具充氧和除铁综合性能的新型工艺形式,能改善含铁地下水的过滤性能.在此基础上提出了深井回流充气稳定期的概念,建立了深井回流充气系统中氧量的平衡关系.通过正交试验,提出了处理中、高量含铁地下水的推荐工艺流程和工艺参数.采用χ—射线衍射方法测试了井内铁泥和成熟滤料表面滤膜的成分和形态,分析了"充气"和"过滤》两过程中的除铁机理.     

Effects of hydraulic pressure on the stability and transition of wetting modes of superhydrophobic surfaces

The underlying mechanisms of stability, metastability, or instability of the Cassie-Baxter and Wenzel wetting modes and their transitions on superhydrophobic surfaces decorated with periodic micropillars are quantitatively studied in this article. Hydraulic pressure, which may be generated by the water-air interfacial tension of water droplets or external factors such as raining impact, is shown to be a key to understanding these mechanisms. A detailed transition process driven by increasing hydraulic pressure is numerically simulated. The maximum sustainable or critical pressure of the Cassie-Baxter wetting state on a pillarlike microstructural surface is formulated for the first time in a simple, unified, and precise form. This analytic result reveals the fact that reducing the microstructural scales (e.g., the pillars' diameters and spacing) is probably the most efficient measure needed to enlarge the critical pressure significantly. We also introduce a dimensionless parameter, the pillar slenderness ratio, to characterize the stability of either the Cassie-Baxter or the Wenzel wetting state and show that the energy barrier for transitioning from the Cassie-Baxter to the Wenzel wetting mode is proportional to both the slenderness ratio and the area fraction. Thus, the Cassie-Baxter wetting mode may collapse under a hydraulic pressure lower than the critical one if the slenderness ratio is improperly small. This quantitative study explains fairly well some experimental observations of contact angles that can be modeled by neither Wenzel nor Cassie-Baxter contact angles and eventually leads to our proposals for a mixed (or coexisting) wetting mode.     

一类一阶线性非齐次方程组的解法

利用二阶线性微分方程的可解定理,给出一阶线性非齐次方程组的一种新解法     

加热速度对煤的气化反应性的影响

实验室条件下考察了五种不同类型的煤经不同加热速度处理后,煤中碳对ＣＯ２化学反应性及单位质量碳的气化反应速度常数－－特殊反应速度常数的变化规律。研究结果表明：适于直接还原回转窑窑头喷煤用的高挥发分煤,经不同加热速度处理后煤中碳对ＣＯ２化学反应性和特殊反应速度常数发生明显变化,随加热速度增大而明显增大,这一研究结果为直接还原回转窑窑头喷煤强化还原的机理研究提供了依据。     

稀土与对-茴香酸配合物的合成与性质

本文合成了通式为ＲＥＬ３（ＲＥ３＋＝Ｐｒ３＋、Ｓｍ３＋、Ｔｂ３＋,,Ｌ＝对茴香酸根）的二元配合物．用元素分析、电导、ＩＲ、ＵＶ、ＴＧＤＴＡ等对其结构和性质进行了表征．该类配合物属桥式双齿配位     

苯甲醛缩氨基硫脲Cu(I)、Zn(Ⅱ)配合物的直接电化学合成

用电化学金属阳极氧化法在非水溶剂中合成了苯甲醛缩氨基硫脲（ＨＬ）与Ｃｕ（Ｉ）、Ｚｎ（Ⅱ）配合物,通过元素分析、红外光谱、紫外光谱、磁矩、摩尔电导等对配合物进行了表征。