气相色谱法研究配位化合物的热稳定性——ⅩⅢ.普鲁士蓝化合物的热分解及其加氢反应研究

普鲁士蓝化合物的热分解过程,可分为三个阶段:(1)脱水;(2)Fe³⁺还原至Fe²⁺;(3)C≡N^-键的断裂。H₂气中的热分解由于发生了一系列的加氢反应,分解产物及所对应的分解温度都不同于He气中的情况,其产物的种类增加,C≡N^-键的断裂温度降低。普鲁士蓝化合物中,CN^-呈典型的双端基配位,可看作是一种双金属配位的活化模型,与CN^-呈单端基配位的K₃[Fe(CN)₆]相比,C≡N^-键的活化程度增加,不仅断裂温度降低,且能发生更深度的加氢反应。     

壳聚糖对鞣酸絮凝作用的研究

以壳聚糖为絮凝剂，采用絮凝法除去中药药液中的杂质。以鞣酸为研究对象，从鞣酸浓度，体系温度，ＰＨ絮凝剂用量粘均分子量等方面探讨其絮凝规律，用正交试验优化其絮凝条件，为实施中药药液的絮凝法精制工艺提供参考。     

Formation,growth mechanism and packing sequences of binary alloy cluster anions from laser ablation of mixtures of lead and transition metals

By using laser ablation of the mixtures of a transition metal (M: Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Pd, Ag) plus lead, M/Pb binary cluster anions were observed except for Zn, and the number of transition metal atoms contained in the binary clusters is at most 4. This behavior is different from that reported previously for M/Ge binary clusters. The experiments indicate that it is also very difficult to form Al/Pb clusters. The distribution patterns of M/Pb binary alloy cluster anions are remarkably similar to those of pure Pb clusters, consistent with a formation mechanism in which transition metal atoms are sequentially attached to [M(x-1)Pb(y)](-) clusters and thus form [M(x)Pb(y)](-) clusters by a simple condensation process. As the number of transition metal atoms increases, the intensities of binary clusters gradually decrease. It is proposed that [MPb(4)](-) and [MPb(5)](-) cluster anions might be the unit building blocks of M/Pb binary cluster anions, and the layer packing sequences for magic clusters are predicted on this basis. The [M(x)Pb(y)](-) binary clusters containing 13 atoms (x + y = 13; x not equal 0) are proposed to have an icosahedral structure.     

Catalytic Oxidation of Dimethyl Ether to Dimethoxymethane over Cs Modified HaPW12O40/SiO2 Catalysts

The attractive utilization route for one-step catalytic oxidation of dimethyl ether to dimethoxymethane was successfully carried out over the H3PW12O40（40%）/SiO2 catalyst, modified by Cs, K, Ni, and V. The Cs modification of H3PW12O40（40%）/SiO2 gave the most promising result of 20% dimethyl ether conversion and 34.8% dimethoxymethane selectivity. Dimethoxymethane could be synthe- sized via methoxy groups decomposed from dimethyl ether through the synergistic effect between the acid sites and the redox sites of Cs modified H3PW12O40（40%）/SiO2.     

热变形奥氏体静态再结晶行为的研究

本文利用双道次压缩的方法,在Gleeble1500热模拟实验机上研究了低碳钢SS400在变形间隔时间内奥氏体的软化行为,以便为制定合理的细化晶粒轧制工艺提供实验和理论基础.采用后插法计算了在不同真应变条件下的静态再结晶率.通过双道次压缩测试静态软化动力学实验的表明,实验钢变形后很容易发生静态软化.在真应变为0.4,0.2时,静态再结晶激活能分别是Qrec=189.3,179.2kJ/mol.     

Maximum spectrum of continuous wavelet transform and its application in resolving an overlapped signal

To estimate the number of peaks and to find the individual peak positions in an overlapped signal, a new method called maximum spectrum of continuous wavelet transform (MSCWT) was developed by extracting the maximum coefficients of continuous wavelet transform (CWT). The peak position in MSCWT was the same as that in its original signal. In this process, CWT was performed not on a single dilation but on an appreciation dilation range. To obtain such a range, a new criterion was introduced to choose a center dilation, which was used to form the dilation range. If Cdilation denoted the center dilation, the proper dilation range was [Cdilation -6 +/- 2, Cdilation +1 +/- 1]. The Mexican Hat function was an analytical wavelet. Utilizing the information of the peak number and the position detected by MSCWT, a fitting route was performed to recover the original signal. One simulated and four true overlapped signals, including high performance liquid chromatography (HPLC), ultraviolet-visible (UV) spectrum, and differential pulse voltammetric (DPV), were processed, and the results indicated that MSCWT could detect an overlapped peak number and position, and the curve fitting based on information of MSCWT had a higher accuracy. The proposed method was an efficient one in resolving different types of overlapped signals.     

Electrochemical insertion of magnesium ions into V2O5 from aprotic electrolytes with varied water content

The electrochemical performance of V2O5 has been studied in propylene carbonate (PC)-containing magnesium perchlorate [Mg(ClO4)2] electrolytes in view of their application as positive electrode in the rechargeable magnesium batteries. V2O5 exhibited good properties in hosting magnesium ions and its electrochemical performance depended on the amount of H2O in the electrolytes. The highest first discharge specific capacities of V2O5 electrode was up to 158.6 mAh/g in 1 mol dm(-3) Mg(ClO4)2 + 1.79 mol dm(-3) H2O/PC electrolytes. Electrochemical impedance spectroscopy (EIS) and charging-discharging tests showed that a reasonable amount of H2O in the electrolyte solution facilitated the electrochemical performance of V2O5 electrodes.     

钾镁氯化物(硫酸盐)与脲、水体系的溶度研究

报导了KCl-MgCl2-CO(NH2)2-H2O和K2SO4-MgSO4-CO（NH2）2-H2O两个四元体系在25℃时的溶度及其饱和溶液的折光率、密度，相应的溶度图和组成-折光率、组成-密度图．前一体系中形成3个三元化合物：MgCl2·4CO（NH2）2·2H2O、MgCl2·CO（NH2）2·4H2O和KCl·MgCl2·6H2O溶度盐份图由9支共饱线、4个四元无变点组成．四元体系的水量图、性质-组成图有类似的变化．后一体系中有2个异成份溶解化合物MgSO4·CO（NH2）2·2H2O和K2SO4·MgSO4·6H2O形成，溶度等温图由7支双饱溶度线、3个四元无变点组成．对两个体系相图的相似性和差异点进行了讨论．     

Effects of cobalt-60 γ-ray irradiation on fresh-keeping and storage of kiwifruits

The boxes contained kiwifruits were irradiated with cobalt-60 γ-rays at different dosages (0.6 , 1.8 and 3.6 KGy) and stored in a room ventilated at night, the natural ambient air being used as cool source.The results showed that the treatment which fruits irradiated with 0.6 KGy was the best after 85 days. It gave the normal-fruit rate of 95.10%, fruit flesh hardness of 4.10 Kg · cm^-2, fresh and plump fruits, good quality and less Vc loss.     

2, 2＇─(1, 4─亚乙二氧基)—二苯甲酸与钴(Ⅱ)生成的两种配合物的结构研究

硝酸钴与２，２＇－（１，４－亚乙二氧基）－二苯甲酸（Ｈ２Ｌ，图１）作用分别得到红色配合物ＣｏＬ＇和蓝色配合物ＣｏＬ″。经元素分析、红外光谱、紫外可见光谱、热分析等方法进行了表征、ＣｏＬ＇配合物的分子式为［ＣｏＬ．Ｈ２Ｏ］．３Ｈ２Ｏ，近八面体构型，羧酸根以双齿形式与Ｃｏ（Ⅱ）螯合；ＣｏＬ″配合物分子式为［ＣｏＬ″］。Ｈ２Ｏ，近四面体构型，羧酸根以单齿形与Ｃｏ（Ⅱ）配位。