Reflection spectroscopy in microstructured light scattering materials

Summary A theoretical model is derived that describes the influence of lateral light diffusion in a scattering medium on the absorptivity of an absorber spot on top of the substrate. The model uses the lateral resolved reflectivity under point irradiation that has been analyzed experimentally with a scanning-micro-laser-reflectometer. The model allows quantification of the absorptivity by one single equation that contains only the mean radial diffusion length of light and the spot area. Experiment and theory are applied to typical substrates for thin layer chromatography (alumina, silica, cellulose). The diffusion lengths in these substrates are given and the absorptivities of the spots are calculated as a function of the spot area.     

Enhancement effect of iron addition for the decomposition of organic mercury as studied by continuous flow analysis with cold vapor atomic absorption spectrometric detection

Summary A continuous flow analysis is described for the determination of total mercury by cold vapor atomic absorption spectrometry. Organic mercury compounds such as methylmercury(II) chloride, ethylmercury(II) chloride and phenylmercury(II) chloride were decomposed by potassium peroxodisulphate with addition of ferric chloride as catalytic reagent. The reducing reagent used was tin(II) chloride in sodium hydroxide solution. With 1,000 mg Fe/l added in the decomposition process, we found that methylmercury(II) chloride and ethylmercury(II) chloride gave response signals similar to those of mercury(II) chloride. The proposed method was applied to the analysis of total mercury in waste water. Permanent address: Department of Chemistry, Faculty of Mathematics and Natural Sciences, Andalas University, Padang, West Sumatra, Indonesia     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

Foams and surface rheological properties of β-casein, gliadin and glycinin

Interfacial rheological properties and their suitability for foam production and stability of two vegetable proteins were studied and compared to β-casein. Proteins used ranged from flexible to rigid/globular in the order of β-casein, gliadin and soy glycinin. Experiments were performed at pH 6.7. Network forming properties were characterised by the surface dilational modulus (determined with the ring trough) and the critical falling film length (L_still) at which a stagnant protein film will break. Gliadin had the highest dilational modulus, followed by glycinin and β-casein, whereas glycinin formed the strongest film against fracture in the overflowing cylinder. The rate of decrease in the surface tension was studied at the air–water (Wilhelmy plate method) and the oil–water interface (bursting membrane) and the dynamic surface tension during compression and expansion in the caterpillar. Gliadin had the lowest equilibrium interfacial tensions and β-casein the lowest dynamic surface tension during expansion. Hardly any foam could be formed at a concentration of 0.1 g/l by shaking. At a concentration of 1.4 g/l most foam was formed by β-casein, followed by gliadin and glycinin. It seems that in the first place the rate of adsorption is important for foam formation. For the vegetable proteins, adsorption was slow. This resulted in lower foamability, especially for glycinin.     

甲醇催化脱氢制甲酸甲酯反应中Cu－ZnO－ZrO_2／SiO_2催化剂的特性

Ｃｕ－ＺｎＯ－ＺｒＯ２／ＳｉＯ２催化剂对甲醇催化脱氢制甲酸甲酯的反应具有良好的活性和选择性．应用连续微反、差示热分析、Ｘ射线衍射、程序升温还原、Ｘ射线光电子能谱分析和红外光谱等技术，对该催化剂的活性中心本质、ＺｎＯ及ＺｒＯ２的助催化作用、可能的反应机理以及催化剂的失活原因进行了探讨．     

发酵监控系统上位计算机软件编程研究

提出了利用上位机参与实时控制,综合分析在线参数、离线参数和间接参数,辅助发酵过程工艺研究和优化控制,并给出了上位机软件包的部分源程序及框图。该软件包对发酵工艺人员进一步了解菌种的遗传特性、细胞代谢调节和反应器工程特性方面有较大帮助。     

Substitution of calcium by strontium within selected calcium phosphates

Sr incorporation in the molecules of amorphous calcium phosphate, apatitic tricalcium phosphate, hydroxyapatite, octacalcium phosphate and dicalcium phosphate dihydrate was investigated. The concentration of Sr ranged from 225 to 1010 μ g / g, i.e. it overlapped with the physiological range of Sr concentrations in human bone. The leading experimental technique was extended X-ray absorption fine structure (EXAFS) at the Sr K edge. Results of these studies demonstrated the following: (1) Sr incorporation in the calcium phosphates is compound-dependent, (2) the coordination of incorporated Sr atoms in the Ca-P molecules is similar to that of Ca atoms, but interatomic distances are ≈0.015 nm larger, (3) in apatitic tricalcium phosphate, hydroxyapatite and octacalcium phosphate lattices Sr atoms may occupy selected Ca sites, which was not the case for dicalcium phosphate dihydrate, (4) in the apatite lattice Sr atoms are coordinated by 6 PO₄ tetrahedrals and (5) EXAFS spectra at the K edge of the incorporated Sr may be used to distinguish the structures of amorphous calcium phosphate, dicalcium phosphate dihydrate as well as apatite and its derivatives (apatitic tricalcium phosphate, octacalcium phosphate).