基于生成对抗网络的渐进式夜视图像彩色化算法

受限于夜景光照不足等影响,夜视成像中的部分内容极易缺失或模糊,导致这部分的彩色化效果不佳.为此,本文提出了一种基于生成对抗网络的夜视图像彩色化算法, 通过对纹理细节的修复来提升图像模糊区域的彩色化效果.首先,在模糊区域修复中,利用下采样操作减少模糊图像块的比例,并用梯度调节预测器对模糊图像块周围的像素值进行预测,以此来不断增强和修复模糊的纹理细节.其次,在彩色化过程中,依托于生成的超分辨率图像和已有的先进对抗网络着色模型,通过最小化亮度和纹理等失真,来生成较为清晰的彩色图像.实验结果表明,经过模糊区域恢复和增强之后,灰度图像的PSNR平均提升0.33 dB.相比之前的夜视图像彩色化方法,本文方法可以赋予灰度夜视图像更丰富、自然的色调,更清楚地表达图像的细节,从而提高目标探测和识别效率.     

Synthesis and reactions of pyrido[3,2,1‐jk]carbazole‐4,6‐diones

Pyrido[3,2,1‐jk]carbazoles 1 , synthesized from carbazoles and alkyl‐ or arylmalonates, gave regioselective electrophilic substitution reactions at position 5 such as chlorination to 5‐chloro derivatives 2 , nitration to 5‐nitro compounds 3 , or hydroxylation to 5‐hydroxy derivatives 4 . 5‐Hydroxy compounds 4 gave on treatment with strong bases ring contraction to 5 , 6 or the ring opening product 7 . Exchange of the chloro group in 2 with azide or amines gave the corresponding azides 8 and the 5‐amino derivatives 9 and 10 . Alkylation of 1 with benzyl chloride or allyl bromide resulted in the formation of 5‐C‐alkylated products 11 together with 4‐alkyloxy derivatives 12 . J. Heterocyclic Chem., 48, 1039 (2011).     

Steps to demarcate the effects of chromophore aggregation and planarization in poly(phenyleneethynylene)s. 2. The photophysics of 1,4-diethynyl-2-fluorobenzene in solution and in crystals

Crystals of 1,4-bis(2-hydroxy-2-methyl-3-butynyl)-2-fluorobenzene 4 have a rich packing structure with four distinct molecules in the unit cell. A complex hydrogen bonding network results in the formation of cofacial trimers, cofacial dimers, and monomers within the same unit cell. Given a remarkable opportunity to investigate the effect of aggregation on the photophysics of 1,4-diethynylbenzenes, we analyzed the absorption, diffuse reflectance, and emission spectra of compound 4 in solutions and in crystals. Diffuse reflectance and fluorescence excitation revealed a red-shifted absorption that is absent in dilute solution but becomes observable at high concentrations and low temperatures. The fluorescence emission in the solid state is dual with components assigned to monomers and aggregates. The excitation and emission assigned to the monomer are nearly identical in crystals and dilute solutions. The absorption and emission bands assigned to aggregates are broad and red-shifted by 60--80 nm. As expected for a sample with absorbers and emitters with different energies and incomplete equilibration, efficient monomer-to-aggregate energy transfer was observed by a proper selection of excitation wavelengths. The fluorescence quantum yield of 4 in solution is relatively low (Phi(F) = 0.15) and the singlet lifetime short (tau(F) = 3.8 ns). A lower limit for the triplet yield of Phi(T) = 0.64 was determined indirectly in solution by (1)O(2) sensitization, and a relatively strong and long-lived phosphorescence was observed in low-temperature glasses and in crystals at 77 K.     

Synthesis,Crystal Structure,and Electrochemical Properties of One Polyoxometalate-Based Silver(I) Compound with Keggin-Type [PW<Subscript>12</Subscript>O<Subscript>40</Subscript>]<Superscript>3−</Superscript> Anions

One polyoxometalate-based silver(I) compound [Ag(2,2'-Bipy)₂]₃(PW₁₂O₄₀) (I) (2,2'-Bipy = 2,2'- bipyridine) has been synthesized and structurally characterized by IR spectroscopy, elemental analysis, XRPD and X-ray single-crystal structure analysis (CIF file CCDC no. 1572216). Compound I exhibits a crystalline three-dimentional supramolecular framework constructed by Ag-2,2'-Bipy coordination units and [PW₁₂O₄0]^3? template anions, in which there are multiform π...π interactions and hydrogen bonds. The cyclic voltammetric experiments show that compound I displays a good electrocatalytic activity toward the reduction of nitrite.     

高分散Ru/FeOx催化剂在二氧化碳选择加氢反应中的应用及其催化活性的调控

由于化石能源的大量开采和利用造成CO2过度排放,从而导致严重的温室效应和气候环境问题,给人类生存带来极大威胁.CO2选择加氢反应可以将CO2催化加氢生成高附加值的CO产物.与其他的CO2转化反应策略相比,该过程中H2的消耗更少,成为可有效处理及转化CO2的手段之一.同时,应尽可能抑制CO2深度加氢以及甲烷的产生,研制及设计具有高CO选择性的新型高效催化剂及其构效关系的分析仍十分重要.据报道,负载型贵金属基催化剂的使用有利于H2分子的活化,具有优异的催化活性,因而广泛应用于多种催化反应中.然而,贵金属催化剂实现工业应用的最大挑战是资源的限制及其高额的成本.近年来,由贵金属制备的负载型亚纳米团簇受到广泛关注,主要包括如Au,Pt,Pd,Ru等贵金属,可有效应用于多相催化反应.人们还致力于提高负载型亚纳米团簇的分散度,促进催化剂活性位点的有效暴露,有利于大幅度提高催化剂的有效利用率.本文采用共沉淀法成功制备了超高分散的负载型Ru基催化剂,通过CO2选择加氢-程序升温表面反应(TPSR)和质谱联用技术测试了催化剂性能,发现CO2加氢反应生成CO选择性达100%.采用XRD,BET和TEM等方法对催化剂结构进行表征,并结合H2-TPR,H2-TPD和XPS等表征结果深入探讨了催化剂构效关系,并提出了针对该催化剂体系较为合理的反应模型.在CO2选择加氢反应的催化性能测试中,2.50%Ru/FeOx催化剂对目标产物CO选择性仅为41%; 随着Ru负载量降低至0.25%和0.1%时,CO选择性明显提高至80%; 当进一步降低Ru含量至0.01%时,CO选择性接近100%,且表现出优异的反应速率.在360 oC时,0.01%Ru/FeOx催化剂的相对反应速率为7.71 molCO2molRu-1 min-1,是2.50%Ru/FeOx催化剂相对反应速率的154倍.H2-TPR结果表明,贵金属Ru可以明显促进载体FeOx的还原,并产生丰富的氧空位,进而促进CO2的吸附、活化.而且CO2选择加氢TPSR结果显示,目标产物CO的起始生成温度总是滞后于原料H2的初始活化温度,与H2-TPR结果及文献报道的CO2选择加氢反应机理一致.通过H2-TPD深入理解H2在催化剂表面的活化和氢溢流现象,以及Hads与不同催化剂之间的相互作用力,0.01%Ru/FeOx催化剂相对较高的H2脱附峰温度表明,该样品中Ru与Hads具有极强的相互作用力,相对抑制了Hads与COads深入加氢生成CH4,从而提高了CO选择性,而2.50%Ru/FeOx催化剂的情况则与此相反.本文提出了从Hads吸附作用力强弱来考虑CO2选择加氢反应选择性的新思路,同时为设计CO2选择加氢制高附加值CO的高催化反应速率、高CO选择性的高分散Ru基催化剂提供了一种经济简易的催化剂设计思路.     

Multilevel profiling and identification of Dalbergia odorifera and Dalbergia stevensonii by FTIR,NMR and GC/MS

Chemical differences of the extractives revealed by FTIR methods can be further confirmed by ¹H NMR and ¹³C NMR. Meanwhile, the volatile compounds in the extractives can be identified by GC/MS     

Sonochemical coating of magnetite nanoparticles with silica

Magnetite nanoparticles were coated with silica through the hydrolysis and condensation of tetraethyl orthosilicate (TEOS) under ultrasonic irradiation. The ultrasonic irradiation was used to prevent the agglomeration of the magnetite particles and accelerate the hydrolysis and condensation of TEOS. TEM, DLS, XRF, VSM, TG and sedimentation test were used to characterize the silica-coated magnetite particles. The dispersibility of silica-coated magnetite particles in aqueous solution was improved significantly and the agglomerate particle size was decreased to 110 nm. It was found that the agglomerate particle size of silica-coated magnetite particles was mainly decided by the coating temperature and the pH value in the silica-coating process. The weight ratio of silica in silica-coated magnetite particles was mainly decided by the pH value in the silica-coating process. The dispersibility of silica-coated magnetite particles was mainly decided by the agglomerate particle size of the suspension. The oxidation of magnetite particles in air was limited through the coated silica. The magnetism of silica-coated magnetite particles decreased slightly after silica-coating.