浅谈制药工程专业有机化学实验教学的心得和体会——以三苯甲醇的制备和重结晶实验为例

有机化学实验是制药工程专业的一门必修课,旨在训练学生有机合成基本实验技能。本文以三苯甲醇的制备和重结晶实验为例,讲述了笔者在多年教学中获得的一点感悟和经验:1)将实验步骤分解成片断讲解可以使学生更好地理解和记忆实验过程和操作目的;2)重要的基本操作应反复练习,即"学习、复习、提高",通过三次重复练习来实现巩固和熟练掌握该操作的目的。     

高分辨电感耦合等离子体磁质谱法测定含铜不锈钢中痕量磷

作者通过试验,用电感耦合等离子体磁质谱(HR-ICP-MS)测定含铜不锈钢中磷含量时,采用高分辨率模式,选择分辨率为4000,在此条件下磷峰可与干扰双原子分子或离子的峰分开。又通过以含铁基的磷标准溶液优化了气体流量和离子透镜的参数,使磷的信号值提高至3×105cps。而加入45Sc作为内标元素又可显著提高测定的稳定性。分别用不锈钢样品和纯铁粉作基体,加入标准溶液制作标准曲线。结果表明:两种方法的线性均较好,分别测得实际样品的结果及其相对标准偏差也基本一致。但两种方法的检出限(3s)不同,前者为1.0μg·g^-1,后者为0.18μg·g^-1。所提出方法的样品处理过程如下:称取样品0.10g置于消解罐中,加入盐酸溶液2mL及硝酸溶液1mL,待剧烈反应缓解时,将消解罐加盖并置于微波消解仪中,于100℃消解10min,升温至200℃继续消解20min。冷却后将溶液转移至100 mL石英容量瓶中,加入0.2mg·L^-1钪内标溶液1mL,加水至刻度,摇匀。此溶液在仪器工作条件下进行HR-ICP-MS测定。对含磷51μg·g^-1的含铜不锈钢,按本方法测定所得结果的相对标准偏差(n=10)小于4%。应用本方法分析了7种标准物质或已知样品(包括低合金钢、含铜不锈钢、高温合金),并同时用ICP-AES进行校对分析。结果表明,本方法与ICP-AES的测定结果基本一致。但本方法的结果与标准物质的认定值更接近,而且对低含量磷(9μg·g^-1)也可很好测定。     

A sweeping-micellar electrokinetic chromatography method for direct detection of some aromatic amines in water samples

A simple and rapid sweeping method for the online improvement of detection limit of some aromatic amines has been developed in this work. The optimum sweeping and separation conditions for 4-methylaniline, 3,4-dichloroaniline, 4-chloroaniline, and 4-aminophenyl were investigated in detail. Under the optimum conditions, the detection limits of these four aromatic amines ranged from 5.4 x 10(-10) to 4.6 x 10(-8)mol/L (S/N = 3), which was about 80-1090-folds lower than those of conventional sample injections. Linear response range were in the range of 2.5 x 10(-8)-2.0 x 10(-6)mol/L with the correlation coefficient between 0.9965 and 0.9994. Baseline separation was achieved within 10 min. After validation, the developed method was applied to determine 4-methylaniline, 3,4-dichloroaniline, 4-chloroaniline, and 4-aminophenyl in river water sample with average recoveries of 79.6-88.7%.     

Comparison of LaFeO3, La0.8Sr0.2FeO3, and La0.8Sr0.2Fe0.9Co0.1O3 perovskite oxides as oxygen carrier for partial oxidation of methane

Comparison of LaFeO3, La0.8Sr0.2FeO3, and La0.8Sr0.2Fe0.9Co0.1O3 perovskite oxides as oxygen cartier for partial oxidation of methane in the absence of gaseous oxygen was investigated by continuous flow reaction and sequential redox reaction. Methane was oxidized to syngas with high selectivity by oxygen species of perovskite oxides in the absence of gaseous oxygen. The sequential redox reaction revealed that the structural stability and continuous oxygen supply in redox re-action decreased over La0.8Sr0.2Fe0.9Co0.1O3 oxide, while LaFeO3 and Lao.sSro.2FeO3 exhibited excellent structural stability and continuous oxygen supply.     

Purification of low-abundance lysozyme in egg white via free-flow electrophoresis with gel-filtration chromatography

As an effective separation tool, free-flow electrophoresis has not been used for purification of low-abundance protein in complex sample matrix. Herein, lysozyme in complex egg white matrix was chosen as the model protein for demonstrating the purification of low-content peptide via an FFE coupled with gel fitration chromatography (GFC). The crude lysozyme in egg while was first separated via free-flow zone electrophoresis (FFZE). After that, the fractions with lysozyme activity were condensed via lyophilization. Thereafter, the condensed fractions were further purified via a GFC of Sephadex G50. In all of the experiments, a special poly(acrylamide- co-acrylic acid) (P(AM-co-AA)) gel electrophoresis and a mass spectrometry were used for identification of lysozyme. The conditions of FFZE were optimized as follows: 130 μL/min sample flow rate, 4.9 mL/min background buffer of 20 mM pH 5.5 Tris-Acetic acid, 350 V, and 14 °C as well as 2 mg/mL protein content of crude sample. It was found that the purified lysozyme had the purity of 80% and high activity as compared with its crude sample with only 1.4% content and undetectable activity. The recoveries in the first and second separative steps were 65% and 82%, respectively, and the total recovery was about 53.3%. The reasons of low recovery might be induced by diffusion of lysozyme out off P(AM-co-AA) gel and co-removing of high-abundance egg ovalbumin. All these results indicated FFE could be used as alternative tool for purification of target solute with low abundance.     

Polyhydrido Copper Nanoclusters with a Hollow Icosahedral Core: [Cu30H18{E2P(OR)2}12] (E=S or Se; R=nPr,iPr or iBu)

Although atomically precise polyhydrido copper nanoclusters are of prime interest for a variety of applications, they have so far remained scarce. Herein, this work describes the synthesis of a dithiophosphate-protected copper(I) hydride-rich nanocluster (NC), [Cu₃₀H₁₈{S₂P(OnPr)₂}₁₂] ( 1_H ), fully characterized by various spectroscopic methods and single-crystal X-ray diffraction. The X-ray structure of 1_H reveals an unprecedented central Cu₁₂ hollow icosahedron. Six faces of this icosahedron are capped by Cu₃ triangles, the whole Cu₃₀ core being wrapped by twelve dithiophosphate ligands and the whole cluster has ideal S₆ symmetry. The locations of the 18 hydrides in 1_H were ascertained by a single-crystal neutron diffraction study. They are composed of three types: capping μ₃-H, interstitial μ₄-H (seesaw) and μ₅-H ligands (square pyramidal), in good agreement with the DFT simulations. The numbers of hydrides and ligand resonances in the ¹H NMR spectrum of 1_H are in line with their coordination environment in the solid state, retaining the S₆ symmetry in solution. Furthermore, two new Se-protected polyhydrido copper nanoclusters, [Cu₃₀H₁₈{Se₂P(OR)₂}₁₂] ( 2_H : R=iPr 3_H : R=iBu) were synthesized from their sulfur relative 1_H via ligand displacement reaction and their X-ray structures feature the exceptional case where both the NC shape and size are fully conserved during the course of ligand exchange. DFT and TD-DFT calculations allow understanding the bonding and optical properties of clusters 1_H – 3_H . In addition, the reaction of 1_H with [Pd(PPh₃)₂Cl₂] in the presence of terminal alkynes led to the formation of new bimetallic Cu−Pd alloy clusters [PdCu₁₄H₂{S₂P(OnPr)₂}₆(C≡CR)₆] ( 4 : R=Ph; 5 : R = C₆H₄F).     

Thermal reaction of HNCO with NO2 at moderate temperatures

The thermal reaction of HNCO with NO₂ has been studied in the temperature range of 623 to 773 K by FTIR spectrometry. Major products measured are CO₂ and NO with a small amount of N₂O. Kinetic modeling of the time resolved concentration profiles of the reactants and products, aided by the thermochemical data of various likely reactive intermediates computed by means of the BAC-MP4 method, allows us to conclude that the reaction is initiated exclusively by a new bimolecular process: with a rate constant, k₁ = 2.5 × 10¹²e^?13,100/T cm³/mols. The well-known bimolecular reaction is the only strong competitive process in this important reactive system throughout the temperature range studied. Kinetic modeling of NO formation and NO₂ decay rates gave rise to values of k₁₀ which were in close agreement with literature data. © 1993 John Wiley & Sons, Inc.     

Syntheses, crystal structures, and properties of two salts based on Ni(mnt)2 (mnt2− = maleonitriledithiolate) anion and substituted triphenylphosphonium cation

Two new salts, [oClBzTPP]₂⁺[Ni(mnt)₂]²⁻(1) and [oClBzTPP]⁺[Ni(mnt)₂]⁻(2) ([oClBzTPP]⁺ = 1-(2′-chlorobenzyl)triphenylphosphonium and mnt²⁻ = maleonitriledithiolate) have been prepared and characterized by elemental analyses, UV, IR, MS spectra, single crystal X-ray diffraction, and magnetic susceptibility. The Ni ions of the Ni(mnt)₂ anions for 1 and 2 exhibit the square-planar coordination geometry. The Ni(III) ions of 2 form a 1D zigzag alternating magnetic chain within a Ni(mnt)₂⁻ column through Ni···S, S···S, or Ni···Ni interactions. The C–H···N, C–H···S, C–H···π hydrogen bonds or π···π stacking interactions play important roles in the molecular stabilizing and stacking of 1 and 2. Magnetic susceptibility measurements in the temperature range 1.8−300 K show that 2 exhibits diamagnetic behavior.     

Determination of pyrethroid pesticide residues in vegetables by pressurized capillary electrochromatography

A simple and rapid pressurized isocratic capillary electrochromatography (pCEC) method has been developed to separate six pyrethroid pesticides. The effects of pH of buffer, organic solvent content, buffer concentrations and applied voltage on the separation of six pyrethroids were investigated. Under the optimized conditions, the pCEC method developed allows baseline separation of a complex mixture of six pyrethroids in <20 min. The method is applied to the analysis of these pesticide residues in Chinese cabbage. The limits of quantification (LOQ) ranged from 0.5 to 0.8 μg/ml (corresponding to 0.05 and 0.08 mg/kg in the vegetable sample), with relative standard deviations (R.S.D.) <5.0%. Mean values of recoveries for six pyrethroids ranged from 89.6 to 96.3%, respectively.     

Designed boronate ligands for glucose-selective holographic sensors

In this study, 2-acrylamidophenylboronate (2-APB) was synthesised and its ability to bind with glucose was investigated both in solution and when integrated into a holographic sensor. Multiple forms of 2-APB, resulting from the neighbouring effect of the amido group with the boronic acid through an intramolecular B--O-coordinated interaction, were shown to exist in solution by using multinuclear NMR spectrometry. It was found that 2-APB predominantly adopts a zwitterionic tetrahedral form at physiological pH values. The complex formation of 2-APB with glucose and lactate was investigated in DMSO; 2-APB favours binding with glucose rather than lactate and generates a five-membered-ring complex. Furthermore, a 2-APB-based holographic sensor displayed a significant response to glucose with little interference from lactate, and with no dependence on pH in the physiological pH range. These features suggest that the new ligand 2-APB is a potential candidate for the development of glucose-selective sensors.