Study of Interactions and Association Thermodynamics Between Sudan Red and Sodium Dodecyl Sulfate in Microemulsions

The absorption spectrum of Sudan red III (SR) in oil solutions and a series of O/W microemulsion with surfactant sodium dodecyl sulfate (SDS) has been determined by the UV-Vis spectrophotometer. We found that an association interaction existed between the stain SR and anionic surfactant SDS in water/mixed oil/SDS microemulsions. By measuring the absorbance of Sudan red in a series of microemulsions which has different R values and using the appropriate association models to analyze the experimental data, we obtain the association constants of SR and SDS, and the values of thermodynamics functions of associationΔ_r G _m has also been calculated from the association constants.     

Adsorption of uranium ions from aqueous solution by amine-group functionalized magnetic Fe3O4 nanoparticle

The magnetic Fe₃O₄ nanoparticle was functionalized by covalently grafting amine group with (3-aminopropyl) trimethoxy silane, and the Fe₃O₄–NH₂ nanoparticle and the Fe₃O₄ nanoparticle were characterized by Fourier transform infrared, and X-ray diffraction. And the results indicated the amine-group was immobilized successfully on the surface of Fe₃O₄. The adsorption behavior of uranium from aqueous solution by the Fe₃O₄ nanoparticle and the Fe₃O₄–NH₂ nanoparticle was investigated using batch experiments. The pH of initial aqueous solution at 5.0 and 6.0 were in favour of adsorption of uranium, and the adsorption percentage of uranium by the Fe₃O₄ nanoparticle and the Fe₃O₄–NH₂ nanoparticle were 81.2 and 95.6 %, respectively. In addition, the adsorption of uranium ions could be well-described by the Langmuir, Freundlich isotherms and pseudo-second kinetic models. The monolayer adsorption maximum capacity of the Fe₃O₄ nanoparticle and the Fe₃O₄–NH₂ nanoparticle were 85.35 and 268.49 mg/g at 298.15 K, respectively, which indicate the adsorption capacity the Fe₃O₄ nanoparticle was improved by amine functionalization.     

囊泡状二氧化硅的合成及油气吸附性能

以正硅酸四甲酯(TMOS)为硅源,P123(EO20PO70EO20)为表面活性剂,在p H=6的磷酸缓冲体系中制备了囊泡状二氧化硅材料.利用乙醇萃取脱除模板剂P123,电镜观测结果表明所得二氧化硅具有大孔囊泡结构,N2吸附结果表明其具有高比表面积和大孔容.通过Boehm滴定法确定了硅羟基数量与吸水率呈正相关.用囊泡状二氧化硅材料与商业化活性炭(AC)和硅胶(SG)对水蒸气、正己烷和油气进行静态吸附.在自建的动态正己烷吸附装置上用对囊泡状二氧化硅材料和商业化AC和SG对正己烷进行动态吸附.吸附结果表明,囊泡状二氧化硅材料的静/动态吸附容量和稳定性都远高于商业化活性炭和硅胶.     

生物燃料电池处理生活污水同步产电特性研究

以某生活污水处理厂缺氧池活性污泥为接种体,以葡萄糖为模拟生活废水,构建双室型微生物燃料电池。利用微生物燃料电池(MFC,Microbial fuel cell)实现生活废水降解与同步产电。研究基质降解动力学及温度对MFC电极过程动力学的影响,明确微生物电化学活性、阳极传荷阻抗、阳极电势、电池产能之间的关系,考察库伦效率及COD去除率。研究结果表明,电池功率输出与基质浓度关系遵循莫顿动力学方程:P=Pmaxc/(ks+c),其中,半饱和常数ks为138.5 mg/L,最大功率密度Pmax为320.2 mW/m2。葡萄糖浓度较小时,反应遵循一级动力学规律:-dcA/dt=kcA,k=0.262 h-1。操作温度从20℃提高到35℃,生物膜电化学活性不断提高,传荷阻抗从361.2Ω减小到36.2Ω,阳极电极电势不断降低,同时,峰值功率密度从80.6 mW/m2提高到183.3 mW/m2。45℃时,产电菌活性降低,峰值功率密度减小到36.8 mW/m2。葡萄糖浓度为1 500 mg/L,温度为35℃时,MFC电化学性能最佳,稳定运行6 h后库伦效率为44.6%,COD去除率为49.2%。     

新型吡唑联吡咯类杂环化合物的合成及杀菌活性

为寻找具有更高生物活性、更环保的新农药杀菌剂,基于杀菌剂氟咯菌腈设计并合成了10个新型吡唑联吡咯类杂环化合物,以吡唑环代替氟咯菌腈上原有的苯环,以期提高其杀菌活性.采用1H NMR,FTIR,单晶X射线衍射、元素分析和熔点测定等测试手段对目标化合物及其中间体的结构进行了表征与确认,并通过挥发法培养得到了6个目标化合物的单晶.还对其中6个化合物进行了生物活性测试,测试结果表明各化合物对水稻纹枯病、黄瓜灰霉病、黄瓜霜霉病均表现出一定的抑菌效果,可作为先导化合物对其结构进行深入的研究,为新农药杀菌剂的开发提供了理论支持.     

Hydrothermal preparation of hybrid carbon/silica monolithic capillary column for liquid chromatography

A simple, easy and economical approach for the preparation of a hybrid carbon/silica monolithic capillary column was described for the first time by using silica monolith as framework in combination with hydrothermal carbonization at 180°C. During the preparation process, formamide was introduced to the reaction solutions to reduce the dissolution rate of monolithic silica skeleton and its optimal concentration was 1.5 M. Fourier transform infrared spectrometry, scanning electron microscopy, energy dispersive X‐ray spectrometry, and inverse size exclusion chromatography were carried out to characterize the as‐prepared column. The results demonstrated that carbon spheres ranging from 150 to 1000 nm were successfully attached to the surface of silica skeleton. The prepared hybrid carbon/silica column had a permeability of 4.4 × 10^?14 m². Chromatographic performance of the column was evaluated by separation of various compounds including alkylbenzenes, nucleosides and bases, and aromatic acids. The column exhibited an efficiency of 75 000 plates/m for butylbenzene at the optimal linear velocity of 0.23 mm/s. The successful separation of these compounds and the study on mechanism indicated that the column can be applied in mixed‐mode chromatography.     

Mass‐spectrometry‐directed analysis and purification of pyrrolizidine alkaloid cis/trans isomers in Gynura japonica

Pyrrolizidine alkaloids are highly hepatotoxic natural chemicals that produce irreversible chronic and acute hepatotoxic effects on human beings. Purification of large amounts of pyrrolizidine alkaloids is necessary for toxicity studies. In this study, an efficient method for targeted analysis and purification of pyrrolizidine alkaloid cis/trans isomers from herbal materials was developed for the first time. Targeted analysis of the hepatotoxic pyrrolizidine alkaloids was performed by liquid chromatography with tandem mass spectrometry (precursor ion scan and daughter ion scan), and the purification of pyrrolizidine alkaloids was achieved with a mass‐directed auto purification system. The extraction and preparative liquid chromatography conditions were optimized. The developed method was applied to analysis of Gynura japonica (Thunb.) Juel., a herbal medicine traditionally used for detumescence and relieving pain but is potentially hepatotoxic as it contains pyrrolizidine alkaloids. Twelve pyrrolizidine alkaloids (six cis/trans isomer pairs) were identified with reference compounds or characterized by liquid chromatography with tandem mass spectrometry, and five individual pyrrolizidine alkaloids, including (E)‐seneciphylline, seneciphylline, integerrimine, senecionine, and seneciphyllinine, were prepared from G. japonica roots with high efficiency. The results of this work provide a new technique for the preparation of large amounts of pyrrolizidine alkaloid reference substances, which will also benefit toxicological studies of pyrrolizidine alkaloids and treatments for pyrrolizidine alkaloid‐induced toxicity.     

PPh3‐Catalyzed Ring‐Expansion Reactions of Sulfamate‐Derived Cyclic Imines with Acetylenedicarboxylates

The PPh₃‐catalyzed ring‐expansion reaction of sulfamate‐derived cyclic imines with acetylenedicarboxylates has been developed. The reaction works quite efficiently under very mild conditions to afford benzo[g][1,2,3]oxathiazocine‐4,5‐dicarboxylate 2,2‐dioxide derivatives in high yields.     

Direct Photocatalysis for Organic Synthesis by Using Plasmonic‐Metal Nanoparticles Irradiated with Visible Light

Recent advances in direct‐use plasmonic‐metal nanoparticles (NPs) as photocatalysts to drive organic synthesis reactions under visible‐light irradiation have attracted great interest. Plasmonic‐metal NPs are characterized by their strong interaction with visible light through excitation of the localized surface plasmon resonance (LSPR). Herein, we review recent developments in direct photocatalysis using plasmonic‐metal NPs and their applications. We focus on the role played by the LSPR of the metal NPs in catalyzing organic transformations and, more broadly, the role that light irradiation plays in catalyzing the reactions. Through this, the reaction mechanisms that these light‐excited energetic electrons promote will be highlighted. This review will be of particular interest to researchers who are designing and fabricating new plasmonic‐metal NP photocatalysts by identifying important reaction mechanisms that occur through light irradiation.     

A Novel Tetranuclear Organotin(IV) Carboxylate with Chain Structure: Synthesis,Crystal Structure,and Characterizations

A new tetranuclear organotin carboxylate {[(n‐Bu₂SnO)₂L]₂}_n (complex 1 ) was synthesized by the reaction of di‐n‐butyltin oxide with (p‐carboxymethoxy‐phenoxy) acetic acid (LH₂) and characterized by elemental analyses: IR, UV–visible, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopy and single crystal X‐ray study. X‐ray crystallography diffraction data revealed that the complex 1 was polymeric fashion with a chain structure containing a ladder‐like tetranuclear organo‐oxotin cluster. In the complex 1 , the ligand LH₂ is coordinated to the central tin(IV) atoms via the carboxylato‐O atoms. The tetranuclear tin system is formed by the bridges through the carbonyl oxygen atom of the carboxylate moieties and making the tin atom of pentacoordinated in distorted trigonal bipyramidal geometry. Single crystal X‐ray data indicate that the complex 1 crystallized in the cubic system with the space group C₂/c.