Components of co-continuous phase can form an interpenetrating network structure, which has great potential to synergistically improve the mechanical properties of the blends, and to impart the functional blends superior electrical conductivity and permeability. In this work, the effects of shear rates (50–5000 s?1) at different temperatures on the phase morphology, phase size and lamellar crystallites of biodegradable co-continuous polybutylene terephthalate (PBAT)/polybutylene succinate (PBS) blend are quantitatively investigated. The results show that the above features of the PBAT/PBS have a strong dependence on the shear flow and thermal field. The co-continuous phase of the blend is well maintained at 130 °C. Interestingly, this phase structure transforms into a “sea-island” structure at 160 °C, which gradually recovers to a co-continuous phase when the shear rate increases from 1000 s?1 to 5000 s?1. The phase size decreases with the increase of shear rate both at 130 °C and 160 °C due to the refinement and deformation of phase structures caused by strong shear stress. Unexpectedly, a unique phenomenon is observed that the shear-induced lamellar crystallites are oriented perpendicular to shear direction in the range of 500–5000 s?1 at 130 °C, while the orientation of lamellar crystallites at 160 °C is along the shear direction within the whole range of shear rates. The degree of orientation for the PBAT/PBS blend crystals increases first and then decreases at both temperatures above. In addition, the range of shear rate has reached the level in the industrial processing. Therefore, this work has important guiding significance for the regulation of the co-continuous phase structure and the performance for the blend in the practical processing.
Achieving low friction and wear of poly(phenylene sulfide)(PPS) without using fillers or blending is a challenging task, but one of considerable practical importance. Here we describe how neat PPS with high tribological performance is achieved by manipulating processing parameters(pressure, flow and temperature). The key to achieving high tribological performance is comparatively high molecular chain orientation, realized in neat PPS, at high shear rates and low pressure. The friction coefficient and wear rate are as low as ~0.3 and~10-6 mm3·N-1·m-1, respectively, which break the record for neat PPS. These values are even better than those for PPS-based blends and comparable to PPS composites. Further studies show, for the first time, that wear rate decreases exponentially with increasing molecular chain orientation, prompting us to revise the classical Archard's law by including the effect of molecular chain orientation. These findings open the possibility of using neat PPS in highly demanding tribological applications. 相似文献
MWCNTs-Co(II) and Pd(II) were prepared through grafting silylated-salicylaldimine Pd(II) and Co(II) on multiwalled carbon nanotubes(MWCNTs) for ethylene oligomerization. The structures of the two MWCNTs-supported catalysts were characterized by means of scanning electron microscopy(SEM), X-ray diffraction(XRD), Fourier transform infrared(FTIR) spectroscopy, thermogravimetric analyses(TGA) and nitrogen adsorption and desorption. And the influence of the supported pattern on the catalytic properties for ethylene oligomerization was investigated. The results revealed that the silylated-salicylaldimine complexes were grafted on the inner and outer surfaces of the carbon nanotubes and the pore size and BET surface area of MWCNTs decreased. Compared with the homogeneous catalysts, the two MWCNTs-supported catalysts had higher selectivity for hexene and 1-hexene in the presence of diethylaluminum chloride(DEAC) with a small molecule size due to confinement effect. MWCNTs-Pd exhi-bited higher activity and higher selectivity for C8+ olefin compared to MWCNTs-Co due to electronic factors. The catalytic activities of MWCNTs-Pd and MWCNTs-Co decreased from 24.18×105g·(mol Pd·h)–1 and 20.57×105g·(mol Co·h)–1 to 19.79×105g·(mol Pd·h)–1 and 13.14×105g·(mol Co·h)–1 after the third recycle reaction, respectively. 相似文献
Science China Chemistry - Secrecy has received tremendous attention in modern information society. Innovative polymer-based fluorescent materials with multiple mode emission are quite desirable to... 相似文献
Mn4+-activated double perovskite phosphors with composition diversity have presented excellent luminescent performances. However, the charge imbalance between Mn4+ and matrix cations would increase non-radiative recombination and reduce the structural stability. Here, novel high-efficiency stable Li+/Mn4+ co-incorporated Sr2YSbO6 red phosphors are successfully synthesized via a solid-state reaction method for warm w-LEDs, where the Li+ ions have the effect of charge balance for Sr2YSbO6:Mn4+ and reduce the non-radiative energy transfer among Mn4+ ions. It is demonstrated that the substitution of Li+–Mn4+ pairs for Sb5+ can enhance the bonding with low-shifted diffraction peaks and high emission intensity, and prolong the decay lifetime, compared with those of Mn4+ single-doped ones. Impressively, the thermal stability is enhanced to 89.72% from 84.61% at the original value of 303 K. Finally, a w-LED device based on the optimal phosphor Sr2YSbO6:0.01Mn4+/0.01Li+ red component exhibits a correlated color temperature of 4487 K and color rendering index of 80.2. Therefore, the incorporated Li+ ions serve as both charge compensator and co-activator in Mn4+-activated double perovskite phosphors with the aim of high luminescent performance and thermal stability. 相似文献