PHOTOCATALYTIC HYDROGEN EVOLUTION FROM WATER SPLITTING UNDER VISIBLE LIGHT IRRADIATION ON NOVEL PHOTOCATALYST FULLENES-PVP-ZN0.999NI0.001S

Fullerenes (C60/C70) linked up to Ni-doped ZnS through the medium of an amphalic polymer polyvinyl pyrrolidone (PVP) to form a new kind of photocatalyst for hydrogen evolution from aqueous Na2S/Na2SO3 solution under visible light irradiation, the photocatalytic activities of this novel photocatalyst C60/C70-PVP-Zn0.999Ni0.001S are 3-5 fold higher compared with that of precurse catalyst Zn0.999Ni0.001S. This result could be attributed to Schottky barrier layer built between C60/C70 and Zn0.999Ni0.001S due to the electro-negativity of C60 and characteristic of being used as a multiple electron acceptor. C60 or C60/C70, its moiety, with its low energy first excited singlet state, is a good energy acceptor and in addition readily accepts multiple electrons, making it a potential electron accumulate as we know, which could protect the separation between electrons and holes against combination. This is an important reason for the marked increase of amount of H2 evolution during the photocatalytic process for the composite system C60/C70-PVP-Zn0.999Ni0.001S.     

Controlled/“Living “Radical Polymerization of(-)-Menthyl Methacrylate

The atom transfer radical polymerization(ARP)of (-)-menthyl methacrylatc((-)-MnMA) mediated by CuCl/bipyridine and ethy1 2-bromopropionate or 1-phenylethyl bromide in THF system has been studied.The dependence of the specific rotation on molecular weight and the CD of Poly((-)-MnMA) thus obatined was investigated.     

CS-MCM-48复合载体固定化脂肪酶催化苯乙酮-锅法还原转酯化拆分反应

将天然聚合物壳聚糖(CS)涂覆在介孔分子筛MCM-48表面制得CS-MCM-48复合载体,控制CS与介孔分子筛MCM-48质量比为1∶10时,CS-MCM-48的比表面积、平均孔径和孔容分别为408 m2/g、2.14 nm和0.38 cm3/g.在磷酸盐缓冲溶液-异辛烷混合溶剂中制备了固定化假单胞菌脂肪酶(Pseudomonas CepaciaLipase,PSL)PSL/CS-MCM-48,并用于潜手性苯乙酮一锅法还原转酯化手性拆分反应.结果表明,PSL/CS-MCM-48的催化活性和对映选择性均明显优于纯介孔分子筛MCM-48和壳聚糖制备的固定化酶PSL/MCM-48和PSL/CS.甲苯作溶剂,反应温度为40℃时,底物1-苯乙醇转化率达15.3%,产物(R)-乙酸苯乙酯和(S)-1-苯乙醇的对映体过量值分别为99%和18.0%,对映选择性参数E值达237,固定化酶PSL/CS-MCM-48显示出良好的手性拆分性能.     

初授《高分子物理》课程的几点体会

作为初次参加《高分子物理》课程教学的教师,从听课、备课、上课、课后等方面进行了总结。只有做好这每个环节,并不断提高自身素质,才能逐渐成长为一名合格的专业教师。     

有机锡聚醚的合成及性质的研究

利用界面缩聚技术,将二烷基二氯化锡、二(β-烷氧羰乙基)二氯化锡与有机二元醇、酚、硫醇反应,制成了一系列新的有机锡大分子化合物.对这些新化合物进行了分子量、红外光谱、TG/DTG测试.对有机锡大分子化合物阻止聚氯乙烯(PVC)热分解性能进行了测定.结果表明,新合成的有机锡聚醚化合物可作为PVC热稳定剂使用.     

A New Application of Carbon Nanotubes Constructing Biosensor

Carbon nanotubes used for constructing biosensor was described for the first time. Single-wall carbon nanotubes (SWNTs) functionalized with carboxylic acid groups were used to immobilize glucose oxidase forming a glucose biosensor. The biosensor response can be determined by amperometric method at a low applied potential (0.40V).     

端羟丁腈聚氨酯/聚甲基丙烯酸甲酯互穿网络高聚物的T_g和形态研究——Ⅰ.组分比和交联程度的影响

用同步法合成了端羟丁腈聚氨酯/聚甲基丙烯酸甲酯互穿网络高聚物[PU(HTBN)/PMMA-IPN]。用动态力学方法和透射电镜研究了它们的T_(?)转变行为和形态。理论计算和实验结果表明,样品具有两个明显相互分离但又各自连续的相结构,呈现出分属于组分聚合物的两个Tg转变(Tg_1,Tg_2)。在全IPN中,PMMA相区的尺寸(1000—2000?),比在接枝共聚物(3000—6000?)和半IPN(—3000?)中的明显变小。适当的交联程度可使相区进一步变小,变均匀,相连续性增加。这是网络互穿造成的“强迫互容”所致。部分丁腈羟(HTBN)分子同PMMA的反应,使一些样品出现了Tg_2升高的现象。     

IDENTIFICATION OF PARTIAL MUTATIONAL SITES IN HUMAN MITOCHONDRIAL DNA IN THE CHINESE AND ITS SIGNIFICANCE

A simple method for the identification of mutational sites in human mitochondrial DNA (mtDNA) was described. It was based on the human Cambridge sequence as a relative standard sequence and a single base pair substitution in mtDNA as a unique mutational form. The partial mutational sites can be determined using this method which was characterized by combining the restriction mapping with the analysis for the table of human mtDNA potential mutational sites with rapidity and simplicity. In the meanwhile, six mtDNA mutational sites found in Chinese population were identified by means of this method.     

甲烷氧化偶联催化剂La2O3／SrCO3—BaCO3的催化活性与表征

在甲烷氧化偶联制Ｃ２烃的研究中，人们发现碱土金属与稀土金属组成的复合氧化物催化剂具有高的催化活性［１，２］．稀土化合物作为有希望的工业催化剂之一，已受到广泛的关注．一般认为，它们含有的氧空位对活化甲烷的有效氧物种有利．Ｄｅｂｅｙ等在１％Ｓｒ／Ｌａ２Ｏ...     

1，4二环己基取代六元瓜环与Na(Ⅰ)自组装实体的合成与晶体结构

A novel complex of a new 1,4-dicyclohexyl cucurbituril(DCYQ[6]) with sodium(Ⅰ) ion was synthesized, and the crystal structure was determined by X-ray diffraction technique. In this self-assembled entity both the cavity interaction of DCYQ[6] included a nitrate anion and the portal interaction of the dipole carbonyls of DCYQ[6] with sodium cations lead to form self assembled molecular capsules. The crystal structure of the entity shows a packing of the self assembled molecular capsules connected by hydrogen bonds of water molecules. CCDC: 271400.