Experimental comparison of nonlinear damping performance of toroidal and conventional tuned liquid column dampers

Nonlinear Dynamics - Conventional tuned liquid column dampers (TLCDs) are deficient in multidirectionality. In contrast, toroidal TLCDs are designed to extend the application to multidirectional...     

盐酸伊达比星杂质A的合成工艺优化及其高效液相分析

通过对盐酸伊达比星脱羟基杂质A的合成研究，为盐酸伊达比星的质控标准提供参考。以盐酸伊达比星为起始原料，经过4步反应得到脱羟基杂质A。本文提供了盐酸伊达比星杂质A的制备方法以及高效液相色谱分析方法，为杂质含量控制提供了依据。该工艺可以稳定、快速制备高纯度脱羟基杂质A，制备总收率为57.20%，纯度为57.20%，其结构经¹H NMR， ¹³C NMR和MS(ESI)表征。     

考虑外委的露天矿剥岩计划的优化研究

针对“剥岩高峰”对矿山生产带来的不利影响，研究了设备配置更新策略与露天开采外委剥离的优化问题.基于铲运设备的运营成本与生产能力随设备役龄变化的关系，建立了决策单台设备退役时间的动态经济寿命计算模型，并根据此模型给出了具体的设备配置算法步骤.设置一系列不同的矿山自剥离量与外委剥离量的分界水平，计算各分界水平条件下的外委单价可行区间，然后在区间内确定外委商谈价格并分析得出与之对应的总成本净现值最低的外委方案.实例计算证明，采用该方法减少设备投资的成本要高于外委岩石剥离成本.     

架空地线电磁感应电流计算与仿真分析

对架空地线电磁感应电流产生的机理进行分析,利用ATP-EMTP上搭建不同电压等级的架空线路模型,并计算光纤复合架空地线(Optical Fiber Composite Overhead Ground Wire, OPGW)上的电磁感应电流,分析了影响OPGW上感应电流大小的因素,为实测及利用此感应电流进行感应取电提供参考依据.     

考虑外界影响的元动作单元故障概率模型

为描述数控机床运动构件的故障率随时间变化的情况,本文从元动作单元出发,建立了一个关于元动作单元的故障概率模型.首先,根据元动作单元故障发生的原因将故障分成两类,随机故障和老化故障.然后,根据这两种故障类型故障数据的不同特点,选用两个不同的概率分布函数分别进行描述,随机故障用泊松分布进行描述,老化故障用威布尔分布进行描述.接着,给出这两种故障概率模型中各参数的物理意义和估计方法.更进一步,工作负载和工作环境会分别对元动作单元的老化故障和随机故障的故障率造成影响.为比较这两者对故障率影响的大小,提出了工作负载参数R l和工作环境参数R e,并给出这两个参数的估计方法.最后,根据收集到的运动构件的故障数据作出频率直方图,同时,对故障数据进行参数估计得到概率密度函数,并将这两者画在同一幅图上,发现两者具有较好的拟合效果.表明提出的元动作单元故障概率模型适合于描述运动构件故障率随时间的变化,模型有效.     

我国档案学研究方法现状管窥

通过对《档案学研究》(2010—2012年)共3年刊载学术论文的研究方法的统计分析,阐述了档案学研究方法的特点与不足,提出了档案学研究方法的发展对策.     

An improved LC–MS/MS method for determination of docetaxel and its application to population pharmacokinetic study in Chinese cancer patients

Because of its unpredictable side effects and efficacy, the anticancer drug docetaxel (DTX) requires improved characterisation of its pharmacokinetic profiles through population pharmacokinetic studies. A sensitive and rugged LC–MS/MS method for the detection of DTX in human plasma was developed and optimised using paclitaxel as an internal standard (IS). The plasma samples underwent rapid extraction using hybrid solid-phase extraction-protein precipitation. The analyte and IS were separated with an isocratic system on a Zorbax Eclipse Plus C₁₈ column using water containing 0.05% acetic acid along with 20 μM of sodium acetate and methanol (30/70, v/v) as the mobile phase. Quantification was performed using a triple quadrupole mass spectrometer through multiple reaction monitoring in positive mode, using the m/z 830.3 → 548.8 and m/z 876.3 → 307.7 transitions for DTX and paclitaxel, respectively. The range of the calibration curve was 1–500 ng/mL for DTX, and the linear correlation coefficient was >0.99. The accuracies ranged from −4.6 to 4.2%, and the precision was no higher than 7.0% for the analytes. No significant matrix effect was observed. Both DTX and the IS showed considerable recovery. This method was finally applied to the establishment of a population pharmacokinetic model to optimise the clinical use of DTX.     

Optical fiber acoustic sensing multiplexing system based on TDM/SFDM

We propose a system of time-division multiplexing(TDM) and spatial frequency-division multiplexing(SFDM). Extrinsic Fabry–Perot interferometric sensors are applied to detect weak acoustic signals. The broadband source is employed, the light from it is modulated by a pulse signal sequence and is efficiently amplified by semiconductor optical amplifiers. Experimental results show that the equivalent noise pressure spectrum level is-97.2 d B re 1 rad/√Hz below 1250 Hz, and the cross talk between two sensors in one TDM channel is-32.7 d B with a cavity length difference of 60 μm. The number of sensors in this multiplexing system can theoretically reach 160.     

高温作用后砂岩物理力学性质阈值温度的确定——基于机器学习算法

通过采用机器学习算法，提出了高温作用后砂岩物理力学性质变化的阈值温度的确定方法。基于Python语言，利用K-Means、SVM算法，实现了对样本数据的分类和聚类，确定了阈值温度区间，验证了二分类法的合理性和准确性.结果表明，砂岩样本的阈值温度区间为400~600 ℃，阈值温度上下砂岩的物理力学性质存在显著差异，体现为阈值温度区间以下的岩样物理力学性质较为分散，而阈值温度区间以上的岩样物理力学性质较为集中.     

高维Euler方程组的强松弛极限

利用能量积分, 讨论在初值充分小的情形下, 高维带有阻尼项的Euler方程组光滑解的整体存在性和强松弛极限, 得到了解的一致先验估计, 并证明当松弛时间趋于0时, 整体解的渐近行为由多孔渗流方程控制.