对乙酰氨基酚与β-环糊精包合方法的研究

本文采用饱和水溶液和固体研磨两种方法制备对乙酰氨基酚与β-环糊精的包合物，将两种方法进行比较发现，两种包合方法均形成包合物，且最佳摩尔比为1：3。但从工艺角度和收率考虑，固体研磨法有很大的优势。     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

物理实验课程考核、评估体系初探

对物理实验课程考核、评估方法进行了探讨，提出了物理实验课程考核、评估体系及实施细则．重点介绍了体系中的核心部分——正规的物理实验课程考试．     

催化裂解法制备螺旋状碳纳米管的实验研究

在硅片上用直流溅射镀铁的方法制备催化剂 ,通过乙炔在 70 0°C下催化裂解制备碳纳米管 .对热解产物进行了扫描电镜观察和 X射线衍射测试 .本文通过对有氢气预处理和没有氢气预处理两种情况下催化裂解法制备的碳纳米管的形貌、管径大小等性质的研究 ,来初步揭示螺旋状碳纳米管的生长机理 .     

Homoclinic and Periodic Orbits Arising Near the Heteroclinic Cycle Connecting Saddle-focus and Saddle Under Reversible Condition

In this paper, we study the dynamical behavior for a 4-dimensional reversible system near its heteroclinic loop connecting a saddle-focus and a saddle. The existence of infinitely many reversible 1-homoclinic orbits to the saddle and 2-homoclinic orbits to the saddle-focus is shown. And it is also proved that, corresponding to each 1-homoclinic （resp. 2-homoclinic） orbit F, there is a spiral segment such that the associated orbits starting from the segment are all reversible 1-periodic （resp. 2-periodic） and accumulate onto F. Moreover, each 2-homoclinic orbit may be also accumulated by a sequence of reversible 4-homoclinic orbits.     

拖曳线列阵用光纤水听器的研究

报道了光纤水听器用于拖曳线列阵的研究结果。在保证光纤水听器声相位灵敏度的前提下, 优化设计了光纤水听器的结构,降低了光纤水听器的加速度灵敏度36dB。实验测得在20-1600Hz 频段,该光纤水听器的相位灵敏度为-162．7dB,频段内灵敏度的起伏为±0．7dB,加速度灵敏度小于-30dB。     

几种新型含氰废水净化剂的研制

用膨润土和高岭土为原料，讨论了膨润土吸附剂的改性方法，制备了系列含氰废水净化剂，进行了废水处理实验，测定了净化后水样含氰量，绘制了净化剂用量与CN^-去除率关系曲线。研究发现，经复合改性的膨润土净水效果最好。当投加1％的改性膨润土，CN^-去除率可达80％以上，并讨论了膨润土的结构与改性机理。为含CN^-离子废水处理提供了有价值的参考依据。     

NI-LAB虚拟组态控制实验室的研制

本文利用虚拟仪器技术,采用了LabVIEW图形编程环境,以数字可编程调节器为原型开发了一套虚拟组态控制实验室,介绍了系统实现的功能、基本组成、软件的设计思想和设计方法以及硬件的选取使用,最后给出具体的演示实例,结果表明,LabVIEW以其强大的硬件驱动、图形显示能力和便捷的快速程序设计为过程控制提供了优秀的解决方案.     

哈密顿算符的对角化与能量本征值问题的代数解法

提出了将哈密顿算符对角化的一种方法.围绕一维谐振子讨论了如何将哈密顿算符对角化、引进的是玻色算符还是费米算符的问题,并分析了能量量子化的原因及能量子与声子的区别.