溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

Rapid determination of underivatized pyroglutamic acid, glutamic acid, glutamine and other relevant amino acids in fermentation media by LC-MS-MS

Determination of amino acids in a complex matrix without derivatization is advantageous, however, difficulties are found in both the detection and the separation of those compounds. In this study, a rapid and reliable LC-MS-MS method for the quantitation of underivatized amino acids in exocellular media was established. Injections were made directly after centrifugation of the samples, without further preparation. The separation of seven underivatized amino acids was achieved on a reversed-phase C18 column with pentadecafluorooctanoic acid as a volatile ion-pair reagent, and the specific detection of most amino acids was achieved by MS-MS of the specific transitions [M + H]+-->[M + H - 46]+. The calibration curves of all analytes were linear over the range of 1.0-1000 microg ml(-1) and the detection limits ranged from 0.1 to 5 ng ml(-1), with an injection volume of 20 microl. The inter-day and intra-day precisions ranged from 2.6 to 5.7% and 4.8 to 8.2%, respectively; the mean recoveries of the seven analytes were 81-104%, 91-107% and 93-101% respectively at the spiked level of 10, 40 and 200 microg ml(-1). A large number of fermentation samples were analysed using this method. The technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of amino acids from other biological matrices.     

Electrostatic layer-by-layer assembled carbon nanotube multilayer film and its electrocatalytic activity for O2 reduction

Multilayer films of shortened multiwalled carbon nanotubes (MWNTs) are homogeneously and stably assembled on glassy carbon electrodes with the layer-by-layer (LBL) method, based on electrostatic interaction of positively charged poly(diallyldimethylammonium chloride) and negatively charged and shortened MWNTs. The film assembly and electrochemical property as well as the electrocatalytic activity toward O2 reduction of the MWNT multilayer film are studied. Scanning electron microscopy, the quartz crystal microbalance technique, ultraviolet-visible-near-infrared spectroscopy, and cyclic voltammetry are used for characterization of film assembly. Experimental results revealed that film growth is uniform, almost with the same coverage of the MWNTs in each layer, and that the assembled MWNTs are mainly in the form of small bundles or single tubes on the electrodes. Electrochemical studies indicate that the LBL assembled MWNT films possess a remarkable electrocatalytic activity toward O2 reduction in alkaline media. This property, combined with the well-dispersed, porous and conductive features of the MWNT film illustrated with the LBL method, suggests the potential application of the MWNT film for constructing an efficient alkaline air electrode for energy conversions.     

含非交换氘的四唑-锌配合物

The solvothermal reaction (D₂O) of 2,6-dideuterium-4-cyanopyridine with ZnCl₂ in the presence of NaN₃ offers a novel complex Zn(OD)(C₆H₂D₂N₄) (1) in which Zn has a distorted tetrahedron composed of two N atoms from one tetrazoyl group and pyridyl group and two O atoms from two deuteratohydroxy OD groups. Crystal data for 1: Pbcn, a=1.456 8(5) nm, b=0.659 2(2) nm, c=1.645 3(5) nm, α=90°, β=90°, γ=90°, V=1.580 0(9) nm³, Z=8, M=231.54, D_c=2.236 Mg·m^-3, μ=3.070 mm^-1, R₁=0.043 4, wR₂=0.120 6, S=1.029. CCDC: 660629.     

毛细管电泳在手性分离中的应用及进展

本文评述了近年来毛细管电泳在手性分离中的应用及进展，介绍了毛细管电泳分离手性对映射的数学模型、五种不同的分离模式及机理、七种常用的手性选择性类型及其在药学、环境和生命科学中的应用、研究中需优化的操作参数及其发展方向。     

MORPHOLOGICAL STUDIES ON THERMOTROPIC LIQUID CRYSTALLINE POLYESTER——MORPHOLOGY OF SHEAR ORIENTED FILMS

The morphology of shear-oriented films of a thermotropic liquid crystalline polyester containing a triad ester mesogenic unit and a flexible spacer has been investigated in details. The formation conditions and process, the fine structures and the relaxation process of mat structure in the oriented films have been observed and discussed.     

TSCR工艺生产IF钢相变及组织演变规律

采用Gleeble-1500热模拟试验机,研究了薄板坯连铸连轧工艺条件下(TSCR)无间隙原子钢(IF钢)的动态连续冷却转变规律,并分析了其组织演变规律.研究表明:Ti-IF钢的相变开始温度随着冷却速度的增大而下降,即Ar3降低,有利于低温终轧,并获得性能良好的IF钢.同时IF钢的硬度值随着冷却速度的增大而增大,冷却速度从1℃/s变化到30℃/s时,HRB从53.4增加到68.3,即其强度随冷却速度增大而增加.     

基于电子商务的逆向物流优化模型及其应用策略

由于通过电子商务购买商品不能在购买前进行商品实体的检验，所以增加了退货的可能性，因此电子商务中的退货逆向物流问题是困扰其发展的一个重要因素。本文通过构建利润最大化模型，得到了在特定市场反应参数下的最优价格以及最优退货策略，并且通过分析市场反映参数得出了一些具有实际操作意义的应用策略。     

唐家河国家级自然保护区夏季啮齿动物的群落分析

2003年7-8月应用样线铗日法对唐家河自然保护区夏季啮齿动物的群落结构进行了调查，共捕获啮齿动物220只，根据生境状况、物种组成和优势种将其归为4个群落，并根据各群落的优势种进行了命名，采用Shannon-Wiener多样性指数、Pielou均匀性指数、Simpson的优势度指数和Whittaker相似性指数，分析了该保护区夏季不同海拔高度啮齿动物群落的结构特点，结果表明群落多样性指数和均匀性指数最大的都是位于中海拔（1800-2500m）受到中度干扰的次生灌丛、针阔混交林和亚高山针叶林，通过对群落相似性指数的计测可以看出生境类型与物种分布具有连续性。     

基于广义逆的受控机构优化

基于受控原动件的机械特性和受控机构二自由度的特点，建立精确实现多点轨迹受控机构的圆拟合优化模型．提出运用广义逆求解补偿运动位移的方法。