Poisson流形上李代数与Poisson辛李群的讨论

文章给出了Poisson流形上李括号的一些结论,并在Poisson流形P1,P2上定义了C^∞（P1）＋C^∞（P2）的{,}运算,验证了C^∞（P1）＋C^∞（P2）构成李代数,其次简单讨论了Poisson辛李群.     

水滑石与氢氧化镁纳米晶的液相法制备及其生成机制

研究了纳米晶镁铝水滑石Mg6Al2(OH)16CO3·4H2O与 Mg(OH)2 的液相法制备及其物相变化.X射线衍射(XRD)和透射电镜(TEM)分析表明,在制备温度分别为30 ℃的低温和190 ℃的高温,可获得纯度大于99%的氢氧化镁针状纳米晶,在45~150 ℃的中间温度范围,可获得纯度大于 99%的镁铝水滑石针状纳米晶.合成温度由35 ℃提高到45 ℃时,生成物相由氢氧化镁变成镁铝水滑石相;合成温度由 170 ℃提高到190 ℃时,生成物相由镁铝水滑石相变成氢氧化镁相.提出低温时生成物的变化与瞬间生成无定形态的Mg(OH)2 有关,无定形态的Mg(OH)2 沉淀为Al13(OH)7 32 中铝离子以及CO2-3 扩散进入Mg(OH)2提供了更为有利的条件.高温时生成物的变化,是由于温度的升高,使含结晶水的镁铝水滑石纳米晶中间层中的高极性水分子堆积所要求的一定的物理条件受到破坏所致.     

基于支撑向量机在线学习方法的短期负荷预测

提出了基于支撑向量机在线学习方法的短期负荷预测,该方法克服了传统的支撑向量机负荷预测当训练样本集合改变时为了保证预测精度必需重新进行训练来得到新的回归函数的缺点.充分利用支撑向量机解的稀疏性和前一次的训练结果,提出了递增和递减算法,直接修改原有回归函数的系数来得到新回归函数.实例计算表明,该方法与传统支撑向量机方法相比,具有计算速度快,推广能力强的显著特点,在相同预测精度下,计算速度提高了近两个数量级.     

流体附加阻尼及其对微型泵输出性能的影响

为提高微型泵的输出能力,从理论上分析了流体对薄膜驱动器动态特性的影响规律,建立了流体作用力及附加阻尼的计算模型.通过理论分析,说明减小流体黏度、增加腔体高度和阀孔直径会降低流体附加阻尼和减小流体对驱动器的反作用力,从而可提高泵的最佳工作频率和输出流量.设计制作了压电泵,并进行了试验,以水和空气为介质测试的压电振子的基频分别为49 6 Hz和2 72 kHz,说明流体黏度对薄膜驱动器的基频有很大影响.试验结果表明,流体黏度的增加会降低驱动器的基频,增加阀孔直径可提高泵的输出流量和最佳工作频率.     

多载波系统中基于镶嵌算法的载频间干扰消除方案

为消除正交频分复用(OFDM)系统中的载波间干扰，在对干扰系数分析与合理估计的基础上，提出了一种基于频域均衡思想的解相关干扰抑制方案．通过干扰矩阵的循环镶嵌算法来消除载频间干扰，抑制系统中的地板效应．与传统的频域均衡方法相比，该方案省去了迭代运算与信道矩阵的求逆运算，计算简便，具有稳定的收敛性，并且适用于无线多径信道和高速移动的环境．仿真结果表明：在系统归一化频偏为0．2时，该方案的系统信干比比标准的OFDM系统提高了32dB，比干扰自消除方案提高了5dB；在系统误码率为101时，该方案的信噪比比干扰自消除方案提高了2～3dB。     

在华外商直接投资对我国产业结构的双重影响与对策研究

近几年,在华外商直接投资迅速增加,掀起了新一轮在华投资热潮。我国三次产业结构日趋合理,在华外商直接投资在其中起到了积极和消极两方面的作用。本文分析了在华外商直接投资的现状及其对我国产业结构影响的正负效应,并提出了相关对策。     

浅谈电动机的故障检查与维护

针对电动机出现的故障检查与维护,从日常检查、电动机具体项目检查、电动机启动前后检查、常见的故障与处理等方面进行了论述。     

Pattern formation in Rayleigh-Bénard convection: Numerical simulation with a coupled-map-lattice model

The various patterns formed in Rayleigh-Bénard convection under different conditions are numerically simulated with a coupled-map-lattice model. In the case of a lower aspect ratio (L/d=5), the simulations vividly depicted the main features of the transition process from a laminar state to a soft turbulence and then to a hard turbulence. In this case, the cellular structure in a horizontal section is also reproduced. In the case of a larger aspect ratio (L/d=30), the simulations successfully reproduced the spiral-defect chaos and target chaos in the initial stage of the pattern evolution which were recently found in experiments. In this case, for a fluid ofPr=1, it is verified in simulations that both the ideal straight rolls and spiral-defect chaos are stable attractors in the same parameter regime, and that the initial condition is a decisive factor for which one of the two is formed. In the same case, for a fluid ofPr=4, the target patterns are dominant instead of the spirals, the sizes and distributions of the target are also notably dependent on the initial condition.     

A Novel Degradation Pathway of Zn（dmid） （ phen）2 in Pyridine

The light-oxidation degradation processes of Zn(dmid)(phen)2(dmid = 4, 5-dimercapto-1,3-dithiole-2 one, phen = 1,10-phenanthroaline) in pyridine solvent has been monitored, h has been found under the light, dmid^2- of Zn(dmid)(phen)2 in pyridine solution could generate NCS^- and NCS^-replaces dmid^2- to form Zn(NCS)2 (phen)2 simultaneously. The crystal structure of Zn(NCS)2 (phen)2 has been determined. In the crystal of Zn(NCS)2 (phen)2. two NCS^- ligands are arranged in syn-configuration, and there is strong π-π interaction between the two adjacent parallel phen.     

Stereo- and regio-selectivity in the photosensitized dimerization of 1, 3-dimethylthymine in solution

The effects of reaction pathway and temperature on stereo- and regio-selectivity of photocycloaddition of 1, 3-dimethylthymine (DMT) which gives four cyclobutane type dimers in solution using acetone as the photosensitizer, are investigated by measuring the product distribution. It is demonstrated that the ground-state aggregation between DMT molecules mainly leads to (h-t)dimers, and the diffusion-controlled triplet dimerization is favorable to the formation of (h-h) dimers.