SYNTHESIS AND CHARACTERIZATIONS OF NEAR INFRARED ABSORBING POLYMERS

A series of near infrared (NIR) absorbing dinuclear ruthenium dicarbonylhydrazine complexes (DCH-Ru),[{Ru(bpy)_2)_2μ-DCH]~(n ) (where bpy = 2,2'-bipyridinc and n = 2, 3 or 4), were prepared. The DCH-Ru complexes areelectrochromic in the NIR region with a high absorption coefficient at 1550-1600 nm typically over 10000 M~(-1)cm~(-1). DCH-Ru complex polymers with good NIR electrochromic properties were also obtained and processed to make a device foroptical attenuation at a wavelength of 1550 nm. The potential of these DCH-Ru polymers for use in a variable opticalattenuator has been demonstrated with an attenuating power at the 1550-nm telecommunication wavelength over 7.0 dB permicron of polymer film thickness. Other classes of NIR active materials are the pentacenediquinones and the correspondingpoly(ether pentacenediquinone)s. These polymers can be electrochemically reduced to the corresponding semiquinone(radical anion) having NIR absorption within a telecom window (e. g., 1310 nm).     

Isomer differentiation by combining gas chromatography,selective self-ion/molecule reactions and tandem mass spectrometry in an ion trap mass spectrometer

This study presents a novel, simple and rapid procedure for isomer differentiation by combining gas chromatography (GC), a selective self-ion/molecule reaction (SSIMR) and tandem mass spectrometry (MS/MS) in an ion trap mass spectrometer (ITMS). SSIMR product ions were produced from four isomers. For aniline, SSIMR induces the formation of the molecular ion, [M+H](+), [M+CH](+), adduct ions of fragments ([M+F](+), where F represents fragment ions) and [2M-H](+). 2 and 3-Picoline produce [M+H](+), [2M-H](+) and [M+F](+), while 5-hexynenitrile produces [M+H](+), [M+F](+) and [2M+H](+) ions. The proposed method provides a relatively easy, rapid and efficient means of isomer differentiation via a SSIMR in the ITMS. Typically, isomer differentiation can be achieved within several minutes. The superiority of the SSIMR technique for isomer differentiation over electronic ionization (EI) is also demonstrated.     

Measurement of toxic volatile organic compounds in indoor air of semiconductor foundries using multisorbent adsorption/thermal desorption coupled with gas chromatography-mass spectrometry

A method for the qualitative and quantitative analysis of volatile organic compounds (VOCs) in the air of class-100 clean rooms at semiconductor fabrication facilities was developed. Air samples from two semiconductor factories were collected each hour on multisorbent tubes (including Carbopack B, Carbopack C, and Carbosieve SIII) with a 24-h automatic active sampling system and analyzed using adsorption/thermal desorption coupled with gas chromatography-mass spectrometry. Experimental parameters, including thermal desorption temperature, desorption time, and cryofocusing temperature, were optimized. The average recoveries and the method detection limits for the target compounds were in the range 94-101% and 0.31-0.89 ppb, respectively, under the conditions of a 1 L sampling volume and 80% relative humidity. VOCs such as acetone, isopropyl alcohol, 2-heptanone, and toluene, which are commonly used in the semiconductor and electronics industries, were detected and accurately quantified with the established method. Temporal variations of the analyte concentrations observed were attributed to the improper use of organic solvents during operation.     

Synthesis of fluorinated imines and carbodiimides from azides via aza-Wittig reaction

The Staudinger reaction of fluoroalkylazides were studied. A series of N-fluoroalkylimines were synthesized via aza-Wittig reaction of N-fluoroalkyliminophosphoranes. The N,N′-difluoroalkylated carbodiimide was also synthesized via the reaction of N-fluoroalkyliminophosphoranes with carbon dioxide or carbon disulfide.     

Comparison of NAA methods to determine medium-lived radionuclides in NIST soil standard reference materials

In order to determine the elemental concentrations of three new soil standard reference materials SRMs 2709, 2710 and 2711 from the National Institute of Standards and Technology (NIST), a comparative study of different medium-lived neutron activation analysis methods was carefully performed. Three irradiation conditions (1-hour thermal, 1-hour epithermal and 5-minute epithermal) and two counting modes (normal and Compton suppression) have been evaluated for following ten elements: As, Au, Cd, Ga, K, La, Mo, Sb, Sm, and W. The results show that the method of 5-minute epithermal and a 1-day decay is the optimum way to analyze Ga, while the addition of the Compton suppression is very beneficial for the determination of K. Using the Compton suppression system in conjunction with the 1-hour epithermal and a 1-week decay, is ideal to determine Au, Cd, Mo and W, while routine 1-hour thermal and a 1-week decay, is adequate to determine As, Sb, Sm and La in concentrations found in soil.     

Substitution-Inert Metal Complex Mobile Phases in Non-Suppressed Cation Chromatography

Substitution-inert metal complexes, [Co(edda)(H₂O)₂]⁺, (Co(edda)(en)]⁺, [Co(edda)(dmen)]⁺, [Co(en)₂-(gly)]²⁺, [Co(en)₂(acac)]²⁺, and [Co(trien)(gly)]²⁺ in their nitrate salt solutions are used as eluents in nonsuppressed cation chromatography (where edda = ethylenediamine-N,N′-diacetic acid, en = ethylenediamine, dmen = N,N′-dime-thylethylenediamine, gly = glycine, acac = acetylacetone, and trien = triethylenetetraamine). It is found that all the mono- and di-valent charged complexes can be used to separate alkali and alkaline earth metal cations, respectively. The separations for monovalent cations are sometimes comparable to those using ultrapure HNO₃ solutions. However, the divalent Ca²⁺ and Sr²⁺ ions cannot be resolved using the metal complex eluents. On the other hand, a selected, direct non-suppressed IC separation of zinc(II) and cadmium(II) ions is demonstrated for the first time using a substitution-inert metal complex eluent and a conductivity detector. Comparisons of these eluents with those reported previously, i. e. HNO₃ and ethylenediammonium salt solution are made and explanations are proposed to account for the different selectivities observed where possible. The future development of this technique is also briefly discussed.     

Hybridized local and charge-transfer excited state fluorophores enabling organic light-emitting diodes with record high efficiencies close to 20%

Pure organic emitters with full utilization of triplet excitons are in high demand for organic light-emitting diodes (OLEDs). Herein, through modulation of electron donors and introduction of phenyl rings as π spacers, we present three pure organic fluorophores (BCz, BTCz and BPTCz) with the hybridized local and charge-transfer (HLCT) excited state feature for OLED fabrication. Importantly, the introduction of π spacers in BPTCz not only enhances locally excited character with a fast radiative decay but also promotes intermolecular interactions to suppress non-radiative decays, contributing to a high solid-state fluorescence efficiency over 90%. Significantly, BPTCz not only endows its doped OLEDs with an external quantum efficiency (EQE) up to 19.5%, but also its non-doped OLED with a high EQE of 17.8%, and these outstanding efficiencies are the state-of-the-art performances of HLCT-based OLEDs.

Three purely organic fluorophores with a hybridized local and charge-transfer excited state feature are presented and enabled organic light-emitting diodes with record high external quantum efficiencies close to 20%.     

Constituents of Flowers of Murraya Paniculata

Three new coumarins, yuehgesin-A (1), -B (2) and -C (3) and 22 compounds—murracarpin (4), mupanidin (5), isomeranzin (6), murralongin (7), scopoletin (10), 7-methoxy-8-(l′-ethoxy-2′-hydroxy-3′-methyl-3′-butenyl)coumarin (11), umbelliferone (12), paniculatin (13), braylin (14), auraptenol (15), meranzin hydrate (16), minumicrolin (17), scopolin (18), caffeine (19), 3,3′,4′,5,5′,6,7-heptamethoxyflavone (20), 4-hy-droxybenzaldebyde (21), p-hydroxybenzoic acid (22), cis- and trans-ferulic acid (23), cis- and transmethyl ferulate (24) and trans-ethylferulate (25)—were isolated and characterized from fresh flowers of Murraya paniculata collected in Taiwan. Their structures were elucidated by spectral methods. The chemotaxonomy of Murraya paniculata is, discussed.     

Poly(N-isopropylacrylamide). I. Interactions with sodium dodecyl sulfate measured by conductivity

Conductometric titration of poly(N-isopropylacrylamide) (polyNIPAM) with sodium dodecyl sulfate (SDS) gave two apparent transitions labeled C1 and C2. The C1 transition was independent of polyNIPAM concentration in the 0.05–0.3 wt % range, whereas C2 was proportional to the polymer concentration. C1 corresponded to the onset of binding of surfactant with polymer. Arguments based on a simple mass action model for micellization are presented to show that C2, the second transition, is not due to any simple explanation such as being the point above which only free micelles are formed with surfactant addition. The cloud point of polyNIPAM increased with the amount of bound surfactant. This was attributed to electrostatic contribution of bound sulfate groups to the increased solubility of polyNIPAM. © 1993 John Wiley & Sons, Inc.