Size and support effects for CO oxidation on supported Pd catalysts

Science China Chemistry - Supporting Pd catalysts characterized significant different size distribution were obtained using PdCl2, [Pd(NH3)4](NO3)2 and Pd(acac)2 as precursors. High-resolution...     

In vivo activation analysis of organ cadmium using the Tsing Hua Mobile Educational Reactor

This work describes a nuclear facility forin vivo prompt gamma activation analysis (IVPGAA) using a moderated neutron beam from a 0.1 W Tsing-Hua Mobile Educational Reactor (THMER). The IVPGAA measurement is a new technique for toxic cadmium determination in organs, which can efficiently be used in clinical diagnosis. The low-power nuclear reactor provides a total neutron flux of 3.3·10⁴ n·cm^–2·s^–1 on the surface of the central vertical neutron beam tube to which a liquid phantom is positioned. The capability of such partial-body irradiation facility is demonstrated. The detection limit of cadmium in the left kidney for a skin dose equivalent of 1.66 mSv (166 mrem) was 1.34 mg in a 500-s irradiation/counting period, and the sensitivity in the left kidney was 103 counts mg^–1·mSv^–1. The performance of IVPGAA system using the THMER nuclear facility therefore has the advantages of mobility and feasibility with high sensitivity under low neutron and gamma doses.     

“元素化学实验”中的“异常”现象(一)--Mn元素化学实验中的“异常”现象及其探析

大一学生在“元素化学实验”教学过程中,对反应条件如温度、催化剂、酸度、浓度或试剂用量等因素的影响考虑不周,可能出现某些实验现象和预想的或理论分析的结果不一致的“异常”现象。本文就学生在Mn元素化学实验过程中遇到的一些“异常”现象进行分析和总结,借助生动直观的演示实验,引导学生探究“异常”现象产生的可能原因和直观认识反应条件对反应结果的影响,培养学生的观察、分析、判断、归纳、推理和解决实际问题的能力。     

加强实验教学环境内涵建设 提高环境育人质量

在实验室里的实验教学过程涉及到教书育人、管理育人、服务育人和环境育人。一个良好的实验环境不仅能够对学生起到潜移默化的教育作用,而且对教书育人、管理育人和服务育人工作的开展和实施也能起到推动和促进作用。本文主要介绍厦门大学化学国家级实验教学示范中心"以学生为中心",在强化实验教学环境内涵建设、提高实验环境育人质量方面的一些做法和体会,以期更好地为实验教学"思政"提供可复制、可推广的建设方案。     

Organostannate derivatives of dicyclohexylammonium hydrogen 2,6-pyridinedicarboxylate: solution/solid-state 13C,119Sn NMR and in vitro antitumour activity of bis(dicyclohexylammonium) bis(2,6-pyridinedicarboxylato)dibutylstannate,and the crystal structure of its monohydrate

Bis(dicyclohexylammonium) bis(2,6-pyridinedicarboxylato)dibutylstannate is assigned seven-fold coordination at tin on the basis of its ¹¹⁹Sn CP/MAS NMR chemical shift (δ=−424.9 ppm). The assignment has been corroborated by a crystal structure determination of its monohydrate, whose tin atom has the trans -C₂SnNO₄ pentagonal bipyramidal [Sn–C=2.040(9), 2.067(8) Å; C–Sn–C =168.9(5)°] geometry. One 2,6-pyridine- dicarboxylato group chelates to the tin atom (Sn–O=2.234(4), 2.260(4); Sn–N =2.279(5) Å) whereas the other binds through only one carboxyl –CO₂ end (Sn–O=2.416(5), 2.441(5) Å). Hydrogen bonds link the cation and the stannate into a linear chain parallel to the b -axis. The lattice water molecule is hydrogen-bonded to the free carboxyl end. The anhydrous compound showed higher in vitro antitumor activity than those of carboplatin and cisplatin when screened against breast (MCF-7, EVSAT), colonic (WiDr), ovarian (IGROV) and renal (A498) carcinoma, and melanoma (M19 MEL) cell lines. © 1997 by John Wiley & Sons, Ltd.     

Pd‐Catalyzed Dearomatization of Anthranils with Vinylcyclopropanes by [4+3] Cyclization Reaction

Dearomatization of anthranils with vinylcyclopropanes (VCPs) by Pd‐catalyzed [4+3] cyclization reaction has been realized. In the presence of a catalytic amount of borane as an activator, bridged cyclic products were obtained in good to excellent yields with excellent stereoselectivities. By introducing a chiral PHOX ligand ( L5 ), asymmetric dearomatization reactions of anthranils with vinylcyclopropanes proceeded with excellent enantioselectivity. Borane plays a key role for the reactivity, likely owing to the formation of a borane–anthranil complex which has been confirmed by NMR experiments.     

Applying magnetic soft mold imprint technology with ultraviolet light‐emitting‐diode array on the fabrication of microlens arrays

This study proposed a novel technology, which uses exposed technology with ultraviolet light‐emitting‐diode (UV‐LED) arrays and the polydimethylsiloxane (PDMS) magnetic flexible soft mold imprint technology, to develop exposed equipments with UV‐LED arrays. This study used magnetic soft mold imprint technology to replicate the structure of microlens, providing a more effective alternative for imprint technology and application. The measurement results showed that PDMS with magnetic iron powder can precisely cast mold to replicate the structures of microlens. Electromagnetic plates were used to control even imprinting with magnetic force, in order to fill the mold of micro‐structure of the photo‐resist. Magnetic iron powder was added to PDMS to produce composite material, which can effectively avoid the transformation of pure PDMS during soft mold imprinting, and increase mechanical strength. Magnetic PDMS soft mold is easy to make, and the casting time is short, so that costs can be effectively reduced. Also with advantages of less free energy on its surface, and unlikely to adhere to the photo‐resist during imprinting, it can be combined with electromagnetic plates evenly to control the magnetic soft mold. This imprinting technology is a big advantage to the production process of micro‐structures during imprinting. Copyright © 2009 John Wiley & Sons, Ltd.