Li+掺杂对Y2SiO5:Pr3+上转换发光性能影响

采用溶胶-凝胶法制备Li+掺杂改性的Y2SiO5:Pr3+上转换发光材料,考察了Li+掺杂对样品晶型及发光性能的影响。采用XRD,DSC-TGA,FS对所制备的材料进行表征,结果表明Li+掺入浓度在7%～8%(摩尔分数)之间会引起Y2SiO5晶体类型由X1型转变为X2型,且Li+掺入后样品转晶型温度由950℃降至800℃;样品经800℃煅烧处理后以X1型Y2SiO5为主相,850℃煅烧处理后以X2型Y2SiO5为主相;Li+掺入同时会提高Y2SiO5:Pr3+材料的上转换发光强度,Li+最佳掺杂浓度为10%,对于双掺杂Pr3+,Li+:Y2SiO5体系中Pr3+最佳掺杂浓度为1.2%。     

Characterization of size‐segregated aerosols using ToF‐SIMS imaging and depth profiling

Size‐segregated particles were collected with a ten‐stage micro‐orifice uniform deposit impactor from a busy walkway in a downtown area of Hong Kong. The surface chemical compositions of aerosol samples from each stage were analyzed using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) operated in the static mode. The ToF‐SIMS spectra of particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were compared, and the positive ion spectra from stage 2 to stage 10 were analyzed with principal component analysis (PCA). Both spectral analysis and PCA results show that the coarse‐mode particles were associated with inorganic ions, while the fine particles were associated with organic ions. PCA results further show that the particle surface compositions were size dependent. Particles from the same mode exhibited more similar surface features. Particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were further selected as representatives of the three modes, and the chemical compositions of these modes of particles were examined using ToF‐SIMS imaging and depth profiling. The results reveal a non‐uniform chemical distribution from the outer to the inner layer of the particles. The coarse‐mode particles were shown to contain inorganic salts beneath the organics surface. The accumulation‐mode particles contained sulfate, nitrate, ammonium salts, and silicate in the regions below a thick surface layer of organic species. The nucleation‐mode particles consisted mainly of soot particles with a surface coated with sulfate, hydrocarbons, and, possibly, fullerenic carbon. The study demonstrated the capability of ToF‐SIMS depth profiling and imaging in characterizing both the surface and the region beneath the surface of aerosol particles. It also revealed the complex heterogeneity of chemical composition in size and depth distributions of atmospheric particles. Copyright © 2014 John Wiley & Sons, Ltd.     

An appraisal of the Suzuki cross-coupling reaction for the synthesis of novel fluorescent coumarin derivatives

We report the chemical design and development of 3-aryl-substituted 7-alkoxy-4-methylcoumarins with enhanced fluorogenic properties. The 3-aryl substituents are installed via an optimized Suzuki–Miyaura cross-coupling (SMC) reaction between a 7-alkoxy-3-bromo-4-methylcoumarin and aryl boronic MIDA esters using Pd(OAc)₂/XPhos in a catalytic system with K₂CO₃ in aqueous THF. Under these conditions, an exocyclic ester functionality is found to be unaffected. Subsequent saponification revealed a carboxylic acid functionality that is suitable for conjugation reactions. Evaluation of their fluorescence properties indicated that the installed 3-heteroaryl substituent, particularly benzofuran-2-yl, resulted in a significant red shift of both the excitation and emission wavelengths.     

Development and validation of an ELISA kit for the detection of ricin toxins from biological specimens and environmental samples

Ricin is a toxin that can be easily extracted from seeds of Ricinus communis plants. Ricin is considered to be a major bio-threat as it can be freely and easily acquired in large quantities. A deliberate release of such toxin in civilian populations would very likely overwhelm existing public health systems, resulting in public fear and social unrest. There is currently no commercially available or FDA-approved prophylaxis such as vaccines, or therapeutic antitoxins or antidotes, available for ricin intoxication. Patient treatment is typically supportive care based on symptoms, often designed to reinforce the body’s natural response. This paper describes the development and validation of a robust ELISA test kit, which can be used to screen for ricin in biological specimens such as whole blood and faeces. Faecal specimens are shown in this study to have better diagnostic sensitivity and a wider diagnostic window compared to whole blood. From these results, it is concluded that faeces is the most suitable clinical specimen for diagnosis of ricin poisoning via the oral route. The ELISA test kit can also detect ricin in environmental samples. An advantage of this ELISA kit over other commercial off-the-shelf (COTS) detection kits currently on the market that are developed to screen environmental samples only is its ability to diagnose ricin poisoning from clinical specimens as well as detect ricin from environmental samples.     

Pseudo-Bonding Interaction between Boron-doped Heterofullerene and Zinc Porphine Predicted by DFT Calculation

Theoretical study on the supramolecular complexes formed between boron-doped het- erofullerene （C59B） and zinc porphine （ZnF）, namely C59B-ZnP and its anion species C59B-ZnP, was performed by density functional theory calculation at wB97XD/6-31G（d） level. Strong interaction between porphyrin and heterofullerene moiety was predicted for these complexes based on geometry and electronic structure analysis. Especially, pseudobonding interaction occurring between the B atom of fullerene and the N atom of porphyrin was predicted to occur in C59B-ZnP complex, but be broken in C59B-ZnP complex. Time-dependent density functional theory calculation manifests the redshift of electron absorption for ZnP upon the interaction with heterofullerene.     

Efficient cross polarization with simultaneous adiabatic frequency sweep on the source and target channels

In this work, we propose a new and efficient heteronuclear cross polarization scheme, in which adiabatic frequency sweeps from far off-resonance toward on-resonance are applied simultaneously on both the source and target spins. This technique, which we call as Simultaneous ADIabatic Spin-locking Cross Polarization (SADIS CP), is capable of efficiently locking both the source and target spins with moderate power even in the presence of large spectral distribution and fast relaxation. It is shown that by keeping the time-dependent Hartmann-Hahn mismatch minimal throughout the mixing period, polarization transfer can be accelerated. Experiments are demonstrated in a powder sample of L-alanine.     

我国今后工程师分类框架设计

英国模式和美国模式是国际上两种典型的注册工程师制度模式,世界上一些经济发达国家已经建立了以注册工程师制度为基础的工程师资格互认协议,这些国际工程师协议以受教育程度、工作经验、资格考试、继续教育一致性为基础。国家人事部在不同的阶段实行过多种工程师管理制度,为适应我国经济发展做了有益的尝试,在试行执业资格注册制度方面也已经进行了多年富有成效的探索,积累了较丰富的经验。文章认为我国新的工程师专业分类的原则主要是：既符合我国国情又能与国际接轨。我国工程师专业分类应在与国际工程师互认的基础性原则相一致的前提下,充分考虑我国现有工程师专业分类情况,尽可能与国际工程师专业分类融合,根据其是否直接涉及社会公众利益和公民生命财产安全,我国新的工程师专业可分为注册和非注册两大类。在借鉴英美国家工程师专业分类的同时,结合我国国情,通过尽可能不重复、不遗漏的综合我国现有一系列职业分类与学科分类代码表,我国工程技术人员按专业可以分成35类,有个别大类可以在大类的基础上再分若干亚类,并提出根据工程师分类构筑工程管理师认证体系的建议。     

Hubbard模型中的相位弦效应与交互Chern-Simons理论

费米子符号在费米液体理论中至关重要. 然而, 在Mott绝缘体中, 很强的电子Coulomb相互作用抑制了体系的电荷涨落并消除了电子交换带来的费米子符号问题. 本文首先回顾二分晶格上Hubbard模型的相位弦理论, 从弱关联的费米液体到强关联的反铁磁Mott绝缘体的转变可以由此得到统一理解. 在任意Coulomb作用强度U下, 我们首先导出Hubbard模型的严格的符号结构. 在小U极限下, 它回到通常的费米子符号; 在大U极限下, 它给出了t-J模型的相位弦符号. 在半满情形下, 我们构造了一种电子分数化的表象, 其中, 电荷子与自旋子通过演生的交互Chern-Simons规范场相互耦合. 由此导出的基态波函数拟设与低能有效理论可以定性刻画Hubbard模型的基态相图. 在弱关联区域, 费米液体的准粒子由电荷子与自旋子的束缚态构成, 其长程相位相干性取决于背景自旋的关联性质. 体系的Mott转变可以通过电荷子打开能隙或是通过自旋子玻色凝聚来实现.     

Complex thermal evaluation for 2,2′-azobis(isobutyronitrile) by non-isothermal and isothermal kinetic analysis methods

Azo compounds are widely used in dyes, pigments, blowing agents, and initiators. Unfortunately, these compounds contain the bivalent –N–N– composition which might be cleavaged readily even under high ambient temperature. The self-accelerating decomposition might cause a runaway reaction and lead to a fire or explosion when the cooling system fails or other upsets occur. To investigate the thermal stability parameters of 2,2′-azobis(isobutyronitrile) with thermal hazard and mechanism, differential scanning calorimetry and thermal activity monitor III were applied with non-isothermal method and isothermal method to obtain onset temperature (T ₀), maximum temperature (T _max), and heat of decomposition (ΔH _d). Thermal stability parameters play a pivotal role in thermal analysis, leading particularly to complex evaluation of the inherently safer design during preparation, processing, transport, or storage. The results provide sufficient thermokinetic parameters for process safety in terms of proactive loss prevention program.     

Synthesis of CuI Trifluoromethylselenates for Trifluoromethylselenolation of Aryl and Alkyl Halides

The development of new strategies for synthesis of trifluoromethylthiolate compounds is of considerable importance in pharmaceuticals, agrochemicals, and advanced materials. Accordingly, currently much attention is being devoted to the development of effective methods and reagents for their synthesis. In contrast, considerably less effort has been afforded to the development of preparing C?SeCF₃ bonds. Herein we report a concise route to synthesize a family of copper(I) trifluoromethylselenolate reagents by the reaction of CuI with the Ruppert’s reagent (Me₃SiCF₃), KF, and elemental selenium in the presence of dinitrogen ligands in CH₃CN at room temperature. The reagent [Cu(bpy)(SeCF₃)]₂ was proven to be air‐stable and highly efficient for nucleophilic trifluoromethylthselenolation of a broad range of (hetero)aryl halides and alkyl halides. This method represents a powerful protocol for the construction trifluoromethylselenolate compounds.