矿山尾矿中微量银元素快速检测方法的研究

针对矿山尾矿中微量银元素测定的技术难题,提出了一种基于超短光路原理的能量色散X荧光能谱快速检测的方法。提高元素测量分辨率,提高样品分析效率,降低光管功率,延长仪器使用寿命。能谱系统优化了滤片以及探测器屏蔽物等设计,准直器采用对X射线基本无散射的聚四氟乙烯,达到微量银元素的检测要求。实际尾矿测试中,银的检出限达到0.1 mg·kg-1,RSD在0.1%～2.6%之间,准确度在87%～115%之间。对比尾矿、原矿及精矿的检测实验,证明了在能量色散X荧光能谱中引入超短光路设计方法,能够提升系统峰/本底比,满足微量银元素的检测要求。     

四苯基卟啉锌-单壁碳纳米管复合薄膜的制备与光电特性研究

使用喷涂法制备了四苯基卟啉锌(ZnTPP)薄膜及ZnTPP-单壁碳纳米管复合薄膜。采用金相显微镜、扫描电子显微镜、台阶仪、四探针测试仪、紫外-可见光分光光度计、傅里叶红外光谱仪对薄膜的形貌、电学及光学性能等进行了系统的测量,研究了ZnTPP薄膜及ZnTPP-碳纳米管复合薄膜的太赫兹响应特性。结果表明,ZnTPP的太赫兹指纹谱峰为44,57,77,88,95和102 cm-1,与文献[3]报道的棕树叶中叶绿素的指纹谱峰基本一致。重要的是,通过与碳纳米管相复合的方法,不仅使ZnTPP有机薄膜的均匀性及致密性得到了改善,还使后者的导电性及在紫外到太赫兹波段的光吸收性能获得明显增强。此外,还发现了复合薄膜在47及66 cm-1处出现新的太赫兹吸收峰,证明了碳纳米管和ZnTPP之间存在的相互作用。这种作用使复合薄膜的综合性能得到提高。结果表明,通过加入碳纳米管,能够对ZnTPP的薄膜质量以及电学和光学性能等进行有效的改善,使之具有综合优良的物理性能、具备光电器件的应用前景。研究成果对促进有机物的太赫兹光谱研究以及寻找新型太赫兹有机敏感材料等具有重要意义。     

Phonon effects in tunnelling through a double quantum dot molecule

Phonon effects in tunnelling through a double quantum dot molecule are investigated by use of a recently developed technique, which is based on an exact mapping of a many-body electron-phonon interaction problem onto a multichannel one-body problem. The molecule is sandwiched between two ideal electrodes and the electron at each dot of the molecule interacts independently with Einstein phonons. Single-electron transmission rates through the molecule are computed and the nonlinear spectrum obtained shows a structure with many more satellite peaks due to the excitations of phonons. The strength of resonant peaks is found to be strongly dependent on the number of excited phonons. The effects of electron-phonon interaction on the current and shot noise, depending on the voltage bias applied at the two electrodes as well as the potential energy of the molecule, are discussed.     

4.44 W of CW 515 nm green light generated by intracavity frequency doubling Yb:YAG thin disk laser with LBO

We demonstrate the generation of 515 nm green laser with diode-pumped Yb:YAG thin disk by intracavity frequency doubling of type-I phase-matched LiB₃O₅(LBO) in a V-type cavity at room temperature. A continuous-wave (CW) output power of 4.44 W at 515 nm was obtained. Optical-optical efficiency of 515 nm green laser is 14.6%. The fluctuation of green laser was 1.6% at the maximum output power in 0.5 h. Thermal lensing effects in Yb:YAG thin disk are investigated too.     

A study of the effect of ZrO2 on the magnetic properties of FePt/ZrO2 multilayer

Fe_xPt_100−x(30 nm) and [Fe_xPt_100−x(3 nm)/ZrO₂]₁₀ (x = 37, 48, 57, 63, 69) films with different ZrO₂ content were prepared by RF magnetron sputtering technique, then were annealed at 550 °C for 30 min. This work investigates the effect of ZrO₂ doping on the microstructural evolution, magnetic properties, grain size, as well as the ordering kinetics of FePt alloy films. The as-deposited films behaved a disordered state, and the ordered L1₀ structure was obtained by post-annealing. The magnetic properties of the films are changed from soft magnetism to hard magnetism after annealing. The variation of the largest coercivities of [Fe_xPt_100−x/ZrO₂]₁₀ films with the Fe atomic percentage, x and differing amounts of ZrO₂ content reveals that as we increase the ZrO₂ content we must correspondingly increase the amount of Fe. This phenomenon suggests that the Zr or O atoms of ZrO₂ preferentially react with the Fe atoms of FePt alloy to form compounds. In addition, introducing the nonmagnetic ZrO₂ can reduce the intergrain exchange interactions of the FePt/ZrO₂ films, and the interactions are decreased as the ZrO₂ content increases, the dipole interactions are observed in FePt/ZrO₂ films as the ZrO₂ content is more than 15%.     

Slow positron beam study of corrosion-related defects in pure iron

Corrosion-related defects of pure iron were investigated by measuring Doppler broadening energy spectra (DBES) of positron annihilation and positron annihilation lifetime (PAL). Defect profiles of the S-parameter from DBES as a function of positron incident energy up to 30 keV (i.e. ∼1 μm depth) were analyzed. The DBES data show that S-parameter increases as a function of positron incident energy (mean depth) after corrosion, and the increase in the S-parameter is larger near the surface than in the bulk due to corrosion. Furthermore, information on defect size from PAL data as a function of positron incident energy up to 10 keV (i.e. ∼0.2 μm depth) was analyzed. In the two-state trapping model, the lifetime τ₂ = 500 ps is ascribed to annihilation of positrons in voids with a size of the order of nanometer. τ₁, which decreases with depth from the surface to the bulk, is ascribed to the annihilation of positrons in dislocations and three-dimensional vacancy clusters. The corroded samples show a significant increase in τ₁ and the intensity I₂, and near the surface the corroded iron introduces both voids and large-size three-dimensional vacancy clusters. The size of vacancy clusters decreases with depth.     

Surface functionalisation of polymer nanofibres by sputter coating of titanium dioxide

The surface properties of nanofibres are of importance in various applications. In this work, electrospun polyamide nanofibres were used as substrates for creating functional nanostructures on the nanofibre surfaces. A RF magnetron sputter coating was used to deposit the functional layer of titanium dioxide (TiO₂) onto the nanofibres. Atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and environmental scanning electron microscopy (ESEM) were employed to study the topography, grain structure and wetting of the nanofibre surfaces, respectively. The AFM results indicated a significant difference in the morphology of the nanofibres before and after the TiO₂ sputter coating. The XRD analysis showed the amorphous structures of the TiO₂ deposition layer. XPS spectra reflected the chemical features of the deposited nanostructures. The ESEM observation revealed that the surface wettability of TiO₂ sputter coated nanofibres was significantly improved after UV irradiation.     

Magnetic and electrical transport properties of delta-doped amorphous Ge:Mn magnetic semiconductors

We report on the growth and characterization of delta-doped amorphous Ge:Mn diluted magnetic semiconductor thin films on GaAs (0 0 1) substrates. The fabricated samples exhibit different magnetic behaviors, depending on the Mn doping concentration. The Curie temperature was found to be dependent on both the Mn doping concentration and spacing between the doping layers. A sharp drop in magnetization and rise in resistivity are observed at low temperature in samples with high Mn doping concentrations, which is also accompanied by a negative thermal remanent magnetization (TRM) in the higher temperature range. The temperature at which the magnetization starts to drop and the negative TRM appears show a correlation with the Mn doping concentration. The experimental results are discussed based on the formation of ferromagnetic regions at high temperature and antiferromagnetic coupling between these regions at low temperature.     

Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

Theoretical investigation of magnetic property in paramagnetic neodymium gallium garnet under high magnetic field

The magnetic property in neodymium gallium garnet (NdGaG) is studied by the quantum theory. The ground configuration split states are calculated taking into account the spin–orbit interaction and crystal field effect. Taking account of the Nd–Nd exchange interaction, a good agreement between experimental and theoretical values can be obtained for the variation of the magnetic moment with the external magnetic field under “extreme” conditions (low temperature and high magnetic field). Moreover, the temperature dependence of magnetic moment and the magnetic susceptibility χ is also discussed. Above 30 K, the magnetization (M) shows a linear field (H_e) dependence.