多层弹性体空间一般问题的解析解

本文利用广义柔度矩阵递推法,成功地导出了多层半无限弹性体空间一般问题,在任意荷载作用和两种层间接触条件下的通解.对于这个通解,不管弹性体的层数为多少,最后均不需再解任何联立方程.作为应用,文末计算了地基位移和应力问题实例.     

塑料摩擦学简论

“摩擦学”是一门新兴的应用学科,迄今主要研究金属的摩擦。工程塑料的使用愈来愈广泛,对塑料的摩擦、磨损与润滑进行系统与深入的研究已经成为迫切的课题。作者在1987年提出建立“塑料摩擦学”并写成了《塑料摩擦学概论》(1987)一书,本文仅仅是对这一新领域的简单介绍。     

WHOLLY-AROMATIC COPOLYESTERS CONTAINING IPA, 2.6-NDA, TPA, CLHQA AND PABA MONOMERS

The crystallinities, thermal properties, liquid crystal properties and rheologic properties oftwo series of the aromatic copolyesters are studied. One of them is composed of IPA, 2,6-NDA,CLHQA, PABA and. the other composed of TPA, 2.6-NDA, CLHQA, IPA. The results showthat the crystallinities of the aromatic copolyesters are relatively low and the melting point of thecopolyesters decreases with an increase of the unsymmetrical contents. These two series of aro-matic copolyesters are both suitable for the conventional melt spinning process and have a goodfiber forming property and a good thermal stability. The viscosities of aromatic copolyestermelts are greatly affected by the shear rate, hence the so-called" thinning under shearing" phe-nomenon. The melts have a rather high viscosity flow activation energy and a relatively lowelasticity.     

钢丝绳断丝定量检测中径向随机晃动误差的补尝

本文论述了钢丝绳断丝定量检测中径向随机晃动误差存在的必然性及该误差对定量检测的影响,基于模拟实验结果,给出了适用于多种类型钢丝绳的V_H-S数学关系式;提出了波形因素的概念与形式,并用软件实现了钢丝绳断丝定量检测中径向随机晃动误差的补偿。     

甘肃洒勒山成速滑坡的基本特征及其形成的动力学机制

本文首先讨论了该滑坡的形态、结构和运动的基本特征,指出:(1)该滑坡可分为特点截然不同的两部分。上滑体,可称为滑动铲部分,滑动时此部分滑体主要沿较陡的滑面发生整体性的转动滑移,垂直位移分量较显著。下滑体,可称为碎屑流部分,滑动时此部分滑体基本上呈近水平的运动;(2)主滑面呈上陡下缓渐转水平的座椅状;(3)滑坡的发展具有“推落式”的特点,上滑体是主动部分,它的突然失稳和下滑是推动下滑体运动的主要动力,(4)此滑坡的产生是斜坡变形累进性发展的结果,滑坡后缘拉裂缝的发展经等速开裂、加速开裂和裂缝闭合等三个阶段,最终导致大滑动。文中根据后缘拉裂缝等速开裂的资料,导出了一个预测滑动发生时间的公式。还根据现场证据进一步分析了造成此类滑坡高速远滑的两个机制:滑动铲机制和碎屑流效应,并根据所提出的机制导出了一个预测此类滑坡最大滑速的公式。     

铁路信号技术进步对铁路运输的贡献

本文用“等效长度”的概念研究并计算了铁路信号技术进步在换算周转量增长中的贡献.依据有关数据,分析并提出了具体的计算方法,算出了铁路信号技术进步的贡献占铁路运输各部门技术进步总贡献的16.49％～20.77％.其中,还未包括为确保行车安全所作出的贡献.     

NCO-新型干洗剂的研究

本文论述了以近代物理方法和化学分析手段剖析美国“三羊牌”去污精结构组成,结合干洗剂基础理论研究,立足国情进行合成、配方、筛选,研制出新型干洗剂NCO—O1、NCO—06,其性能相当于进口样品,应用面广。     

Amperometric detection of catecholamines with liquid chromatography at a novelly constructed prussian blue chemically modified electrode

A novel Prussian blue chemically modified electrode (CME) was constructed and characterized for liquid chromatography electrochemical detection (LCEC) of catecholamines. Both anodic and cathodic peaks could be obtained by monitoring at constant applied potential at anodic and slightly cathodic potential ranges (0.3-0.7 and -0.2-0.1 V vs. SCE), respectively. When arranged in a series configuration, using the modified electrodes as generating and collecting detectors, extremely high effective collection efficiencies of 0.91 (for norepinephrine) and 0.58 (for dihydroxyphenylacetic acid) were achieved in dual-electrode LCEC for catecholamines; and a linear response range over 3 orders of magnitude and a detection limit of 10 pg were obtained with a downstream CME as the indicating detector.     

Methodology for the preparation of C1-monoalkylated 1,2-dihydro[C70)] derivatives: formation of the "other" regioisomer

Deprotonation of 1,2-C(70)H(2) with TBAOH, followed by alkylation with methyl bromoacetate, results in formation of a C1-monoalkylated 1,2-dihydro-C(70) derivative. The position of the alkyl group (C1) was established by NMR spectroscopy and comparison with literature spectra of C2-monoalkylated analogs. Presumably, C1-alkylation is the major process due to selective deprotonation of 1,2-C(70)H(2) at C1. Substitution of benzyl bromide for methyl bromoacetate results in rapid dialkylation, unless the amount of base is carefully controlled, in which case C1-monobenzylation is the major process. This methodology for alkylation at C1 is complimentary to methods for the C2-monoalkylation of C(70) with Zn and methyl bromoacetate.