Differential determination of arsenic(III) and total arsenic using flow injection on-line separation and preconcentration for graphite furnace atomic absorption spectrometry

Arsenic(III) can be quantitatively extracted using sodium diethyldithiocarbamate (NaDDTC) as the complexing agent and C18 reversed phase packing as the column material for solid phase extraction. Arsenic(V) must be reduced to its trivalent oxidation state prior to extraction. A mixture of sodium sulphite, hydrochloric acid, sodium thiosulphate and potassium iodide was found to be optimum for on-line reduction. When the sorbent extraction is carried out without and with the addition of the reduction mixture, arsenic(III) and total arsenic can be determined sequentially by graphite furnace atomic absorption spectrometry with detection limits (3 σ) of 0.32 ng for As(III) and 0.43 ng for total arsenic. A 7.6-fold enhancement in peak area compared to direct injection of 40 μl samples was obtained after 60 s preconcentration. Results obtained for sea water standard reference materials, using aqueous standards for calibration, agree well with certified values. A precision of 5.5% RSD was obtained for total arsenic in a sea water sample (1.65 As). Results obtained for synthetic mixtures of trivalent and pentavalent arsenic agreed well with expected values.     

Multi-cracks problem for piezoelectric materials strip subjected to dynamic loading

This paper analyses and models the dynamic interaction among permeable multi-cracks in a piezoelectric strip under anti-plane shear waves by the Schmidt method. The Fourier transform is applied and then two pairs of triple integral equations can be solved using the Schmidt method. The results show that the stress and the electric displacement intensity factors of cracks depend on not only the crack length and the piezoelectric coefficient, but also the thickness of the piezoelectric strip, the distance between multi-cracks and the frequency of incident wave.     

基于变芯径光纤的光学系统在光造型中的应用

光学系统采用变芯径光纤，可大幅度提高光的传输效率，增加光学子系统柔性。描述了光造型工作原理及其理论依据，在介绍所研制的光的成型系统光学子系统的基础上，阐述了紫外光源的选择与设计，及变芯径光纤的设计、传输、耦合与聚焦等技术。该套基于变芯径光纤的光学子系统成本低、体积小、效率高，巳成功应用于所研制的台式低成本快速成型系统中，为该系统的进一步推广奠定了技术基础。     

模式语义链元建模及其应用

大粒度的模型转换是模型驱动软件开发场景下的重要技术需求，仅通过定义通用模型转换语言不足以满足这一需求，其中一个原因是通用模型转换语言工作在特定建模语言的元模型层次而非一般设计意图层次上．文中提出一种模式语义链(PSL)元建模方法．通过重型扩展统一建模语言(UML)元模型以直接形式化描述可表达一般设计意图的模式，并应用UML动作语义和元模型继承实现模式自动生成及转换．该方法为实现一船设计意图层次上的大粒度模型转换提供了有效支持．     

结合环的一个结构定理

本文讨论了一般结合环与(左)S-单式周期环在一定条件下的结构问题,得出它们分别是局部交换环与诣零交换环,或为局部交换环的亚直和。同时,推广和改进了文献[l]的结果。     

广义Hénon映射的滑模变结构控制同步

基于可线性化的非线性离散变结构跟踪控制方法实现了广义Hénon映射混沌系统的同步.广义Hénon映射的混沌吸引子比Hénon映射的混沌吸引子要复杂得多,对于保密通信来说,这种复杂性正是所期望的.提出的同步方法允许参数有适当的失配程度,这对工程实现是非常有利的,理论分析和仿真结果证实了该方法的有效性 关键词： 广义Hénon映射 混沌 同步 变结构控制     

Intramammary expression and therapeutic effect of a human lysozyme-expressing vector for treating bovine mastitis

To develop a gene therapy strategy for treating bovine mastitis, a new mammary-specific vector containing human lysozyme (hLYZ) cDNA and kanamycin resistance gene was constructed for intramammary expression and clinical studies. After one time acupuncture or intracisternal infusion of healthy cows with 400 μg of the p215C3LYZ vector, over 2.0 μg/ml of rhLYZ could be detected by enzymatic assay for about 3 weeks in the milk samples. Western blotting showed that rhLYZ secreted into milk samples from the vector-injected cows had molecular weight similar to that of the natural hLYZ in human colostrums. Twenty days after the primary injection, the quarters were re-injected with the same vector by quarter acupuncture and even higher concentrations of rhLYZ could be detected. Indirect competitive ELISA of milk samples showed that the vector injection did not induce detectable humoral immune response against hLYZ. Clinical studies showed that twice acupuncture of quarters with the p215C3LYZ vector had overt therapeutic effect on clinical and subclinical mastitis previously treated with antibiotics, including disappearance of clinical symptoms and relatively high microbiological cure rates. These data provide a solid rationale for using the vector to develop gene therapy for treating bovine mastitis.     

散热器型芯烘烤窑净化系统中分离器的设计研究

为解决铸铁散热器生产环境污染、产品成品率及产品质量低下等问题,笔者研制了XWJ-1型消烟雾化净化系统。该系统是根据乡镇企业实际状况,在原烘烤窑内采用烟道重新配置、油烟预处理、水雾化冷却、分离污染物、净化排放五步骤设计。通过6年多的试验运行和改进,结果证明,使用XWJ-1型油烟雾化净化系统,可以把高温、高浓度烟气中的焦油和有害气体减少90%,并分离净化到符合国家环保排放标准要求(GB9078-1996,GB16297-1996),较好地解决了热能利用、污染物回收利用等问题,提高了制芯及散热器的成品率及其质量,使企业经济效益显著提高。     

篮球运动中运动员的机能恢复方法和措施

通过对篮球运动中运动员机能恢复方法手段进行研究,论述了科学、合理的方法、手段,对加快运动员体能恢复和提高运动能力的作用;提出了教育学、医学生物学、心理学等恢复方法的种类及应用的时机.     

定床河工模型的设计制作研究

本文以南盘江防洪工程对宜良高古马段河道治理的河工模型实验为例,分析了河工模型的设计制作要求,并详细讨论了制作技巧,有效地提高了模型实验的精度。