束流线性耦合效应的初步研究

在储存环的束流传输系统中,斜四极场和纵向螺线管场是引起束流线性耦合的主要原因.由于这种耦合,使得束流的幅度和发射度发生交换,引起束流横向包络的增大,严重的将造成束流损失.从Betatron运动方程出发研究了斜四极场和螺线管场存在时束流的幅度耦合效应,分析了斜四极场存在时束流发射度的变化.     

A New Cytotoxic Acetogenin from the Seeds of Annona squamosa

A New Annonaceous acetogenin,squamostolide(1),was isolated from the seeds of Annona squamosa.Its structure was elucidated based on spectroscopic methods and comparison with known compounds.It is the first example of Annonaceous acetogenin with each of the two ends of the aliphatic chain bearing a γ-lactone.Thenew compound exhibited cytotoxic activity in vitro against bel-7402 and CNE2 human tumor cell lines.     

Microstructure transition of Al-Cu eutectic alloy during containerless rapid solidification

Droplets of Al-32.7%Cu eutectic alloy were rapidly solidified during containerless processing in a 3 m drop tube. The microstructural evolution of Al-Cu eutectic alloy depends strongly on droplet size. The eutectic growth morphology changes from regular lamellar eutectic to a kind of anomalous eutectic with the decrease in droplet size. This microstructural transition was analyzed within the current theories of eutectic growth. The results indicate that there exists a critical velocity for eutectic growth beyond which anomalous eutectic appears. The coupled zone of the Al-Cu eutectic alloy system has been calculated on the basis of the Trivedi-Magnin-Kurz(TMK) eutectic growth and the Lipton-Kurz-Trivedi(LKT)/Boettinger-Coriell-Trivedi(BCT) dendrite growth models, which provides a further interpretation for the morphological transition.     

边界拟合坐标网格生成方法研究

指出了Thompson及Thomas曲线网格生成方法中控制网格分布的调节函数的问题所在，克服了Thomas曲线网格生成法中边界局部平直近似假定的缺陷，经过严格推导得出一组新的调节函数，并给出了曲线网格生成实例。实例检验表明，该调节函数能够对复杂边界的单连通域或多连通域生成理想的曲线网格，即边界处网格正交，内部网格分布能够适应物理量场变化。     

心理素质诊断模型的建立与应用

综合运用国内外多种测量量表对大学生的心理素质进行诊断与测试 ,并应用多元统计分析方法对其心理素质结构主因素进行定量分析 ,在此基础上建立了心理素质诊断模型 ,并运用该模型对实际问题进行了分析 .     

炉液倾动重心近似计算的数学分析

为给转炉设计提供依据,需要计算炉液倾动的重心.利用数学方法将实际问题进行简化,通过分析炉液倾动过程中变量间的相互关系,来确定每个倾动角度对应情况下的液面位置.利用数学中三重积分的有关应用,进一步得出转炉在每个倾动角度为α∈(0,π2)时的重心计算方法及相关结论,在理论上为工程计算重心的方法提供参考.     

金属颗粒-半导体膜Cu:CdS的制备及结构研究

利用磁控溅射产生金属Cu团簇，同时蒸发半导体介质CdS，将Cu团簇包埋在CdS介质中，制备出金属颗粒 半导体膜．团簇大小可通过改变溅射气压控制．用TEM研究了嵌埋团簇的结构．分析表明：CdS很好地包埋了Cu团簇，都呈多晶结构；团簇尺寸在5—20nm，Cu晶格发生了膨胀，膨胀量在7%左右 关键词：     

GeⅩⅪ-SeⅩⅩⅢ离子n=3,Δn=0跃迁谱线和振子强度的计算

用HFR方法对CaⅨ-KrⅩⅩⅤ离子3s2,3s3p,3s3d,3p2组态能级结构进行了理论计算.在已有实验研究的基础上,通过分析离子能级沿等电子序列的变化规律,运用最小二乘拟合方法预言计算了GeⅩⅪ-SeⅩⅩⅢ离子3s2,3s3p,3s3d,3p2组态14条精细结构能级值.在此基础上,进一步计算了GeⅩⅪ-SeⅩⅩⅢ离子3s2-3s3p,3s3p-3s3d和3s3p-3p2跃迁的23条谱线波长和相应的振子强度.计算结果与已有的实验值十分吻合,波长的最大不确定度为0.008 nm.     

液相外延GaAs1-xPx混晶的光学声子、等离子体激元和LO声子-等离子体激元耦合模

在40—700cm^-1波数和4.2—300K温度范围内研究了不同组份液相外延n型CaAs_1-xP_x样品的红外反射谱。对反射谱进行了赝谐振子拟合与K-K关系计算。从而获得了有关描述CaAs_1-xP_x样品的光学声子模、等离子体激元、LO声子-等离子体激元耦合模的重要物理参量及红外光学常数信息。基于这些计算结果,提出了双导带谷并计及与X能谷相联系的施主能级模型,用它解释等离子体激元频率和实验观察的三支主要的耦合模的温度变化规律。 关键词：     

A NEW MATRIX METHOD FOR SOLVING VIBRATION AND STABILITY OF CURVED PIPES CONVEYING FLUID

This paper proposes a new matrix method for calculating critical flow velocity of curved pipes conveying fluid, which have arbitrary centerline shape and spring supports. Its main advantage over other methods is that the corresponding characteristic equation can be reduced to a third order one, no matter how many elements are discretized in calculation. This will lead to saving computer time and obtaining a solution with good precision.