Synthesis and optoelectronic properties of silole‐containing polyfluorenes with binary structures

2,5‐Bis(2‐bromofluorene‐7‐yl)silole was prepared by a modified one‐pot synthesis with a reverse addition procedure, from which novel silole‐containing polyfluorenes with binary random and alternating structures (silole contents between 4.5 and 25% and high M_w up to 509 kDa were successfully synthesized. The well‐defined repeating unit of the alternating copolymer comprises a terfluorene and a silole ring. Optoelectronic properties including UV absorption, electrochemistry, photoluminescence (PL), and electroluminescence (EL) of the copolymers were examined. The different excitation energy transfers from fluorene to silole of the copolymers in solution and in the solid state were compared. The films of the copolymers showed silole‐dominant green emissions with high absolute PL quantum yields up to 83%. EL devices of the copolymers with a configuration of ITO/PEDOT/copolymer/Ba/Al displayed exclusive silole emissions peaked at around 543 nm and the highest EL efficiency was achieved with the alternating copolymer. Using the alternating copolymer and poly(9,9‐dioctylfluorene) as the blend‐type emissive layer, a maximum external quantum efficiency of 1.99% (four times to that of the neat film) was realized, which was a high efficiency so far reported for silole‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 756–767, 2007     

In situ observation of NaBi(WO4)2 dendrite growth and the study on microstructure of solidification

The dendrite growth process of transparent NaBi(WO₄)₂ with small prandtl and high melting point was studied by using the in-situ observation system. According to the dynamic images and detailed information, there are two kinds of restriction effect on the dendrite growth, the competition between arms and branches and the convection in the melt. The dendrite growth rate was time dependent, and the rate of arm growth reached the maximum 5.8 mm/s in the diffusive-advective region and rapidly decreased in the diffusive-convective region. The growth rate of branch had the same change trends as the arm’s. Based on the EPMA-EDS data of solidification structure of quenched NaBi(WO₄)₂ melt, it was found that there were component differences from stoichiometric concentration in the melt near the interface during the growth process. Supported by the National Natural Science Foundation of China (Grant No. 50331040) and the Innovation Funds from Shanghai Institute of Ceramics, Chinese Academy of Sciences (Grant No. SCX0623)     

寡头垄断市场排污收费的政府调控模型

基于完全信息博弈理论,阐述了寡头垄断市场的排污收费古诺模型.建立了具有政府宏观调控机制的博弈模型,并对调控效果进行了分析.     

目标函数扰动的集值优化问题的稳定性

本文研究了由目标函数扰动的集值优化问题的有效点集所定义的集值映射的半连续性.讨论了目标函数扰动的集值优化问题在上半连续意义下的稳定性.特别地,在广义适定性条件下,证明了集值优化问题在上半连续意义下的稳定性.     

单级A/O程序HSMBR系统性能和亚硝酸型SND

采用单级A/O程序复合膜生物反应器(HSMBR)处理高氨氮废水,研究了在低DO浓度下系统对有机物、氨氮和总氮的去除效率.研究结果表明:在低DO浓度下,COD,氨氮的平均去除率分别为94.4%和92.8%.由于进水COD/TN比仅为2.01,则使得总氮平均去除率仅为69.4%,但是当系统亚硝化累积率从60.5%～67.1%提高到83.5%～86.4%时,系统总氮去除率提高了17.7%.另外,DO在0.5～1.0 mg·L-1时,TN去除率为69.4%,亚硝酸盐氮累积率在60.5%～89.5%之间,可见维持低DO浓度可以实现亚硝酸型同时硝化反硝化.     

顶板裂隙水对锚索支护巷道稳定性的影响研究

巷道顶板岩层裂隙水对岩石具有软化、泥化和膨胀变形作用,影响巷道围岩的稳定性.本文采用快速拉格朗日元程序计算分析了岩层裂隙水软化岩石和降低锚杆/锚索锚固力对巷道稳定性的影响.研究得出对砂质泥岩顶板在未受采动影响,且含水率小于1%时裂隙水对围岩稳定性影响不大.图5,表5,参7.     

TDI线扫相机光学通道建模与仿真

卫星相机建模与仿真研究不论在民用还是军事领域都具有重要的理论研究和实际应用价值。根据TDI线扫相机的工作原理建立了一个TDI线扫相机光学通道的数学模型,该模型包括从景物到TDI CCD离散图像的几何投影关系和能量传递关系两部分,对于确定的成像系统,给定景物参数和光学系统参数,就可以确定对应图像传感器上的离散图像。为了验证模型,对一幅卫星图像进行了计算机仿真。建立的模型可以用来研究当成像条件改变时对图像的影响,进一步还可以用来发展虚拟卫星相机系统。     

一种供应链中的知识管理绩效评价方法研究

作为知识管理的重要组成部分，知识管理绩效评价旨在帮助企业找出影响绩效提高的关键因素并及时采取有效措施，提高知识管理水平。本文从创造顾客价值、知识的获取能力、知识的共享与传播能力、知识的运用水平、知识的存量水平和知识管理平台等六个方面，分析了评价供应链的知识管理绩效应考虑的主要因素，建立了供应链的知识管理绩效评价指标体系，在此基础上，提出了运用D-S证据推理方法，对供应链知识管理绩效进行评价，并给出了证据推理的算法步骤，最后通过算例分析，说明该方法的有效性、实用性。     

光束偏转法自动测试激光等离子体冲击波系统的研制

根据光束偏转原理，研制了激光等离子体冲击波自动测试系统的硬件和软件。该系统使用计算机与可编程序控制器作为上下位机，采取上下位机通讯的方式控制步进电机及二维移动架的移动，以改变探测光的相对位置，并利用单模光纤和光电倍增管将探测到的光偏转信号传入数字示波器进行存储，最后计算机将示波器中采集到的光偏转信号进行分析处理。使用该系统对激光等离子冲击波的衰减过程进行了实际测试，得到了较为理想的实验结果。     

40Ar+诱导无定形碳到金刚石纳米晶相变的研究

通过60 keV的⁴⁰Ar⁺辐照无定形碳靶合成了大量尺寸不同的金刚石纳米颗粒.高分辨透射电子显微镜配合能量色散X射线谱和电子衍射以及Raman谱分析的结果表明，这些嵌于具有扰动石墨结构薄膜中的纳米金刚石颗粒，其成核率很高(约为10¹³/cm²)，而且可以生长到较大的尺寸，有的甚至可以达到微米量级.对其相转变过程也进行了初步探讨. 关键词： 离子束 金刚石纳米晶 相变 透射电子显微镜