Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Electrochemical behavior of Li intercalation processes into a Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 cathode

Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (X=0.17, 0.25, 0.33, 0.5) compounds are prepared by a simple combustion method. The Rietvelt analysis shows that these compounds could be classified as having the α-NaFeO₂ structure. The initial charge-discharge and irreversible capacity increases with the decrease of x in Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂. Indeed, Li[Ni_0.50Mn_0.50]O₂ compound shows relatively low initial discharge capacity of 200 mAh/g and large capacity loss during cycling, with Li[Ni_0.17Li_0.22Mn_0.61]O₂ and Li[Ni_0.25Li_0.17Mn₀.₅₈]O₂ compounds exhibit high initial discharge capacity over 245 mAh/g and stable cycle performance in the voltage range of 4.8 -2.0 V. On the other hand, XANES analysis shows that the oxidation state of Ni ion reversibly changes between Ni²⁺ and about Ni³⁺, while the oxidation state of Mn ion sustains Mn⁴⁺ during charge-discharge process. This result does not agree with the previously reported ‘electrochemistry model’ of Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂, in which Ni ion changes between Ni²⁺ and NI⁴⁺. Based on these results, we modified oxidation-state change of Mn and Ni ion during charge-discharge process.     

热连轧精轧机组温度模型的改进

从实际生产数据入手,研究了温度模型设定精度的现状及设定精度与各影响因素之间的关系,同时还消化了原来的温度模型程序并将其移植到微机上.经大量的离线统计回归分析,提出了一个行之有效的温度模型改进方案.该改进方案的思路同样适合其他热轧生产线.     

杂交稻亲本始穗期与栽培条件关系的研究

本文研究了杂交稻制种中,营养生长阶段的栽培条件与亲本始穗期的关系,适宜的营养面积和空间与植株个体和群体生长势,花粉密度呈正相关。利用栽培技术来调节花期和花粉密度,对提高制种产量有重要作用。     

火焰原子吸收光谱法测定磁化杯中铅、镉和铁

本文研究了火焰原子吸收光谱法测定磁化杯陶瓷内胆中Ｐｈ、Ｃｄ和Ｆｅ含量的方法。样品经粉碎，用硝酸－高氯酸混合液进行消解后测定。本法灵敏度高，干扰少，简单，快速，具有良好的精密度和准确度，其相对标准偏差分别为Ｐｂ３．９９％，Ｃｄ１０．７％，Ｆｅ０．９％。回收率Ｐｂ１００．６１％，Ｃｄ１０１．１８％，Ｆｅ１０２．４％。     

随机删失下乘积限过程和累积失效率过程振动模的局部渐近性

在随机删失下研究了乘积限过程和累积失效率过程的振动模的局部性质 .给出了这两个过程的振动模的重对数律 ,并应用这些结果得到了几种核密度估计和Bahadur-Kiefer过程的精确收敛速度     

生态文明与化学及化学教育--纪念现代化学诞生200周年

在提出生态文明的概念和对现代化学诞生200周年的回顾与反思之后，阐述了生态文明时代对化学与化学教育提出的新要求以及我们如何去适应这些新时代的要求。     

基于B/S模式的年度考核管理系统的设计与实现

本文阐述了新疆师范大学年度考核管理系统的功能、设计与实现。     

Transfer matrix approach of vibration isolation analysis of periodic composite structure

The transmission properties of elastic waves propagating in a three-dimensional composite structure embedded periodically with spherical inclusions are analyzed by the transfer matrix method in this paper. Firstly, the periodic composite structures are divided into many layers, the transfer matrix of monolayer structure is deduced by the wave equations, and the transfer matrix of the entire structure is obtained in the case of boundary conditions of displacement and stress continuity between layers. Then, the effective impedance of the structure is analyzed to calculate its reflectivity and transmissivity of vibration isolation. Finally, numerical simulation is carried out; the experiment results validate the accuracy and feasibility of the method adopted in the paper and some useful conclusions are obtained. Project (No. 50075029) supported by the National Natural Science Foundation of China.