Thermal decomposition properties of guanidine nitrate and basic cupric nitrate

Characterized with a large gas production and low combustion temperature, the guanidine nitrate (GN) gas-generating agents are studied and applied widely. The determination factors of thermal decomposition properties of guanidine nitrate and basic cupric nitrate (GN/BCN) gas-generating agents for airbag application was investigated by the thermogravimetry–differential scanning calorimetry–mass spectrmetry–Fourier transform infrared spectroscopy (TG-DSC-MS-FTIR) and automatic calorimeter. Five different mass ratios were concerned. Our study showed that the onset reaction temperatures of GN/BCN mixtures were lower than that of individual GN and BCN. The thermal decomposition of GN/BCN mixtures could be divided into three stages, including the dissociation and escape of crystal water, solid (GN)-solid (BCN) phase reaction, and liquid (GN)-solid (BCN) phase reaction. When mass ratio of GN/BCN was 62.24/37.73, the largest value of the reaction heat was measured to 3152.7 J g^?1, with N₂ and H₂O as the major gases during thermal decomposition.     

Electrodeposited nanogold decorated graphene modified carbon ionic liquid electrode for the electrochemical myoglobin biosensor

In this paper, a carbon ionic liquid electrode (CILE) was fabricated using ionic liquid 1-hexylpyridinium hexafluorophosphate as modifier, which was further in situ electrodeposited with graphene (GR) and gold nanoparticles step by step to get an Au/GR nanocomposite modified CILE. Myoglobin (Mb) was further immobilized on the Au/GR/CILE surface with Nafion film to get the modified electrode denoted as Nafion/Mb/Au/GR/CILE. Cyclic voltammetric experiments indicated that a pair of well-defined quasi-reversible redox peaks appeared in pH 3.0 phosphate buffer solution with the formal potential (E ^0′) located at ?0.197 V (vs. saturated calomel electrode), which was the typical characteristics of Mb heme Fe(III)/Fe(II) redox couples. Thus, the direct electron transfer rate between Mb and the modified electrode was promoted due to the high conductivity and increased surface area of Au/GR nanocomposite present on electrode surface. Based on the cyclic voltammetric data, the electrochemical parameters of Mb on the modified electrode were calculated. The Mb-modified electrode showed excellent electrocatalytic activities towards the reduction of trichloroacetic acid and H₂O₂ with wider linear range and lower detection limit. Using GR and Au nanoparticles modified CILE, a new third-generation electrochemical Mb biosensor was constructed with good stability and reproducibility.     

Multicomponent Domino [4+1+1] Carbocyclization Providing an Efficient and Regioselective Strategy to Fluoren-9-ones

Concise and efficient three‐component domino [4+1+1] carbocyclization to highly substituted fluoren‐9‐one derivatives promoted by K₂CO₃ has been developed under microwave irradiation conditions. The direct bis‐cyanation and aryl amination residing in fluoren‐9‐one framework were achieved in a one‐pot operation. The reaction proceeds at fast rates and can be finished within 30 min, which makes workup convenient to give good to excellent chemical yields.     

3,4-Dinitrobenzamide Functionalized CdTe/ZnTe Quantum Dots as a Nanoprobe for Imaging Glutathione S-Transferase in Living Cells

A novel fluorescent nanoprobe for glutathione S‐transferase (GST) has been developed by incorporating 3,4‐dinitrobenzamide (a specific substrate of GST) onto CdTe/ZnTe quantum dots. The probe itself displays a low background signal due to the strong quenching effect of the electron‐withdrawing unit of 3,4‐dinitrobenzamide on the quantum dots. However, GST can efficiently catalyze the nucleophilic substitution of reduced glutathione on the p‐nitro group of the nanoprobe, leading to a large fluorescence enhancement. Most notably, this enhancement shows high selectivity and sensitivity towards GST instead of the other biological substances. With this nanoprobe, a simple fluorescence imaging method for intracellular GST has been established, and its applicability has been successfully demonstrated for imaging GST in different living cells, which reveals that A549 cells express GST about 3 times higher than NIH‐3T3 and Hela cells.     

MgF2对Mn4+掺杂锗酸盐红色荧光粉发光的影响

3.5MgO·0.5MgF₂·GeO₂∶Mn⁴⁺作为优异热稳定性和良好发光性能的红色荧光粉而被市场应用,然而,该粉体中MgF₂的作用影响机理尚不明晰,阻碍其性能进一步优化和发展。采用高温固相法制备了系列Mn⁴⁺激活的锗酸盐荧光粉,通过对比加入MgF₂、H₃BO₃(助熔剂),研究了该粉体的结构、形貌、发光性能等变化规律,阐明了MgF₂的发光影响作用。研究表明,加入MgF₂、H₃BO₃和不加任何助熔剂时的样品,其最佳烧结温度分别为1 150、1 250和1 350 ℃,上述温度下发光强度均为最佳值,其中加入MgF₂、H₃BO₃的样品在最佳温度处生成了纯相。MgF₂的添加,一方面同H₃BO₃一样作为助熔剂对生成纯相、提高样品结晶度起了积极的作用;另一方面,通过研究分析,确认F^-离子成功掺杂进入晶格,促使样品生成的晶体结构为Mg₁₄Ge₅(O,F)₂₄。加入MgF₂、H₃BO₃在最佳烧结温度的样品的荧光寿命分别为0.93和0.75 ms。     

顶空气相色谱法测定瑞替加滨原料药中残留溶剂

建立了测定瑞替加滨原料药中残留溶剂乙醇、正己烷、四氢呋喃、三乙胺的顶空气相色谱方法。采用氢火焰离子化检测器,以N,N-二甲基甲酰胺为样品溶剂,通过对色谱条件优化,建立了以DB-624为分析柱、110℃为平衡温度、15 min为平衡时间的残留溶剂测定方法。经方法学验证,上述4种溶剂的方法检出限依次为0.007 5%、0.000 48%、0.002 4%、0.01%;峰面积的相对标准偏差均小于2.1%;平均回收率为100%～102%;4种溶剂的线性系数均大于0.995。结果表明,该方法的检测灵敏度高、精密度好、准确度高、线性关系良好,能够满足对瑞替加滨质量的控制要求。将该方法应用于3批瑞替加滨原料药的残留溶剂检测,均只检出乙醇和正己烷,且乙醇和正己烷的最高残留量分别为0.149%和0.022%,均未超出限量规定。     

胆碱类低共熔溶剂的物性及应用

作为一种新型的离子液体,胆碱类低共熔溶剂具有相比于其他离子液体更为突出的特点,如低毒、生物可降解、价格低廉等,这些特点使得此类离子液体在绿色化学和工程化学中受到越来越多的关注。本文分析了胆碱类低共熔溶剂的凝固点、熔点、溶解度、黏度、表面张力、电导率等物性随温度、组成、水分等因素的变化及理论预测模型,并介绍了胆碱类低共熔溶剂在润滑、功能材料制备、电化学、有机合成及生物质催化转化等方面的潜在应用。最后就胆碱类低共熔溶剂研究及应用中存在的问题及难点对其前景做出展望。     

Two Bisupporting Keggin-Type POM-Based Hybrids Decorated by [Zn(phen)2]2+ Fragments

Two bisupporting Keggin-type polyoxoanion-based hybrids decorated by [Zn(phen)₂]²⁺ complexes, [Zn(phen)₂]₂(PW ₁₁ ^VI W^VO₄₀) (1) and K[Zn(phen)₂(H₂O)]₂(OH) (SiW₁₂O₄₀)·H₂O (2) (phen = 1,10′-phenanthroline), have been hydrothermally synthesized, and characterized by elemental analysis, IR spectra, UV–Vis spectrum, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis, and single-crystal X-ray diffraction. The structural analyses reveal that compound 1 consists of a 0D bisupporting Keggin-type heteropoly blue cluster obtained by using reductant glucose, which is grafted by two [Zn(phen)₂]²⁺ fragments; compound 2 presents a 1D infinite chain, which is constructed from bisupporting [SiW₁₂O₄₀]^4? polyoxoanions decorated by [Zn(phen)₂(H₂O)]²⁺ fragments and K⁺ ions. Additionally, the electrochemical behaviors of two compounds were studied.