~1H MAS NMR characterization of hydrogen over silica-supported rhodium catalyst

Hydrogen species in both SiO2 and Rh/SiO2 catalysts pretreated in different atmospheres (H2, O2, helium or air) at different temperatures (773 or 973 K) were investigated by means of 1H MAS NMR. In SiO2 and O2-pretreated catalysts, a series of downfield signals at -7.0, 3.8-4.0, 2.0 and 1.5-1.0 were detected. The first two signals can be attributed to strongly adsorbed and physisorbed water and the others to terminal silanol (SiOH) and SiOH under the screening of oxygen vacancies in SiO2 lattice, respectively. Besides the above signals, both upfield signal at -110 and downfield signals at 3.0 and 0.0 were also detected in H2-pretreated catalyst, respectively. The upfield signal at -110 originated from the dissociative adsorption of H2 over rhodium and was found to consist of both the contributions of reversible and irreversible hydrogen. There also probably existed another dissociatively adsorbed hydrogen over rhodium, which was known to be p hydrogen and in a unique form of "delocalized hydrogen". It wa     

MO(M=Cu和Ni)/TiO2/-Al2O3催化剂在CO+O2反应中的活性

采用X射线衍射(XRD),程序升温还原(TPR)等表征手段考察了TiO2改性对CuO(或NiO)在γ-Al2O3表面上分散以及还原性能的影响,同时检测了这些改性的催化剂在CO+O2反应中的活性.结果表明:TiO2的改性使得CuO和NiO在γ-Al2O3载体上的分散复杂化,产生了多种状态的氧化铜(氧化镍)物种.当负载量低于其在γ-Al2O3上的分散容量(0.56 mmol Ti4+/100 m2γ-Al2O3)时,TiO2的加入主要是抑制了CuO和NiO在γ-Al2O3载体上的分散;而当负载量远大于其分散容量时,出现了CuO和NiO在晶相TiO2(锐钛矿)上的分散.无论其负载量如何,TiO2的加入促进了CuO的还原.因此,在250℃的CO+O2反应中,改性的催化剂中具有更多的活性位,因而显示出更高的活性;相反,TiO2的改性则抑制了NiO的还原.因此,在350℃的CO+O2反应中,可还原的氧化镍的量明显少于未经改性的催化剂,导致改性催化剂的活性降低.     

EXAMINATION OF THE SURFACE FREE ENERGY AND ACID-BASE PROPERTIES OF CELLULOSE BY THE COLUMN WICKING TECHNIQUE AND THE CRITICAL PACKING HEIGHT/DENSITY

INTRODUCTIONThe wicking technique has been used to determine the surface energy components of solids[1-7]. Generally, thereare two wicking processes in practice, i.e. thin layer wicking and column wicking. A comparison of the twowicking techniques made by van Oss et al.[2], shows that column wicking has a problem of showing differentpacking density due to some kinds of powder materials, i.e. clay can not give good repacking reproducibility[2].But thin layer wicking has a problem in sample…     

Optimization of the process parameters of synthesis of vinblastine imprinted polymer

Molecularly imprinted polymers (MIPs) are tailor-made polymers with high selectivity for the template molecule. This selectivity arises from the synthetic procedure followed to prepare the MIP. In this work, the influence of process parameters on the preparation of vinblastine (VLB) imprinted polymers was presented. In the procedure of polymerization, VLB (0.1 mmol) was used as the template molecule and a commonly used initiator, azobisisobutyronitrile (AIBN), was employed to initiate the reaction at 60 °C. The influence of the following parameters was investigated: the moles of functional monomer (MAA, 0.3-1.0 mmol), the moles of cross-linker (EDMA, 1.5-5.0 mmol) and the porogenic solvent (toluene or acetonitrile). A mathematical method of uniform design was applied to optimize these selected parameters in order to increase the selectivity of MIP for template molecule. The experimental data were analyzed to obtain the regression model and the optimal conditions were achieved by optimization with uniform design software. The MIP was synthesized under the optimal conditions that 1.0 mmol of MAA and 5.0 mmol of EDMA copolymerized in toluene in the presence of 0.1 mmol of VLB. After removal of the template molecule, the obtained MIP was then employed as the sorbents of solid-phase extraction (SPE) to separate VLB from Catharanthus roseus extract. The results showed that the polymer exhibited high affinity to the template molecule and could separate and enrich VLB from C. roseus extract effectively. The recovery of VLB on the optimal MIP was 89.00%, which agreed closely with the predicted recovery. Therefore it is possible to further improve the nature of the polymer by optimizing the polymerization parameters with the method of uniform design.     

SYNTHESIS AND-CHARACTERIZATION OF THE SOLUBLE, HIGH MOLECULAR WEIGHT AND LADDERLIKE POLYHYDROSILSESQUIOXANE AND ITS COPOLYMERS

The high molecular ladderlike polyhydrosilsesquioxane (LPHSQ) and its copolymer, ladderlike random copolymethylhydrosilsesquioxane (LR-PMHSQ) and ladderlike block copolymethylsilsesqui-oxane(LB-PMHSQ) have been synthesized by a preaminolysis reaction of the corresponding trichlorosilane with 1 ,4-phenylene diamine(PDA) then by hydrolysis and polycondensation reactions The thermographs of these polymers measured by DSC method indicate that these macromolecular backbones are very rigid as seen from the DSC curves which are almost horizontal from room temperature until 350 ~C without noticeable glass transition. The content of Si—H group in the polymers can be regulated by changing the composition of the two copolymerized monomers. So the ladderlike polymers including its copolymers can be the useful precursors for the functional polymers, especially such as fishbone-like liquid crystalline polymers.     

A General, Highly Efficient Ullmann C-O Coupling Reaction under Microwave Irradiation and the Effects of Water

A general, rapid and highly efficient method for the synthesis of diaryl ethers under the assistance of microwave irradiation was described. A series of diaryl ethers were prepared by direct coupling of phenols and aryl halides in good to excellent yields in anhydrous DMF or NMP at 150 ℃ within 20 rain. The presence of water was found to have a significant impact on the Ullmann C-O coupling reaction between aryl halides and phenols under microwave irradiation.     

Crystal Structure and Luminescence of a Europium Coordination Polymer {[Eu(p-MOBA)_3·2H_2O]·0.5H_2O· 0.5(4,4′-bipy)}_∞

ＩｎｔｒｏｄｕｃｔｉｏｎＭｏｎｏｎｕｃｌｅａｒ ,ｄｉｎｕｃｌｅａｒａｎｄｐｏｌｙｍｅｒｉｃｔｙｐｅｓｏｆｃｒｙｓ ｔａｌｓｔｒｕｃｔｕｒｅｓｆｏｒｌａｎｔｈａｎｉｄｅｃｏｍｐｌｅｘｅｓｗｉｔｈｂｅｎｚｏｉｃａｃｉｄａｎｄｉｔｓｄｅｒｉｖａｔｉｖｅｓｈａｖｅｂｅｅｎｏｂｔａｉｎｅｄｂｅｃａｕｓｅｏｆｔｈｅｖａｒｉ ａｔｉｏｎｏｆｂｒｉｄｇｉｎｇｆｏｒｍｓｆｏｒｃａｒｂｏｘｙｌａｔｅｇｒｏｕｐａｎｄｃｏｏｒｄｉｎａ ｔｉｏｎａｂｉｌｉｔｙｏｆｄｉａｍｍｉｎｅｌｉｇａｎｄｓ ,ｓｕｃｈａｓ 1,10 ｐｈｅｎａ…     

FREE STANDING FILM OF POLYANILINE

A free standing film of polyaniline as large as 18 cm×18cm×0.002 cm can be obtained by evaporation of a solution of the chemically synthesized base in NMP. Its structure was examined by the elemental analysis, IR, U.V.-visible spectra, XPS, DSC, SEM and X-ray scattering and its conducting behavior as well as electrochemical properties were studied. Results show that the composition, structure of main chain, physical properties of the free standing film of polyanilme is similar to that of the powder. However, some differences in its electronic structure, conductivity at room temperature and potential of redox couple between the flee standing film and powder are observed, which may be due to cross-linking of the film of polyaniline.     

Eu3+在Ba2TiSi2O8中的发光

The barium titano-silicate phosphors doped with Eu³⁺ were synthesized by high temperature solid state reaction. The structures of as-synthesized samples were characterized by powder XRD. The maximum peaks of emission spectra of Ba₂TiSi₂O₈ and Ba₂TiSi₂O₈∶Eu³⁺ were respectively located at 450 and 618 nm, coming from the transitions of charge-transfer bands of Ti⁴⁺-O^2- and forced electric-dipole transition ⁵D₀-⁷F₂ of Eu³⁺. The luminous mechanisms of Ba₂TiSi₂O₈ and Ba₂TiSi₂O₈∶Eu³⁺ were suggested. The effects of concentration of Eu³⁺ on the luminous performance of Ba₂TiSi₂O₈∶Eu³⁺ were also studied and the results showed that the optimum concentration of Eu³⁺ was 0.12 mol per mole of matrix.     

牛血清白蛋白与十二烷基硫酸钠作用的机理

利用电动势法得到了牛血清白蛋白(BSA)与十二烷基硫酸钠(SDS)相互作用的结合等温线. 通过四阶导数紫外光谱法和荧光光谱法研究了相互作用过程中芳香族氨基酸残基微环境极性的变化. 通过研究发现, 随着SDS浓度的逐渐增大, SDS在BSA上的平均结合数(v)逐渐增大, 色氨酸(Trp)残基所处微环境的极性在减弱后保持基本不变, 酪氨酸残基所处微环境的极性在明显增强后稍有减弱, 苯丙氨酸残基所处微环境的极性略有增强. 结果表明, 当v由0增大到14时, SDS主要结合在BSA的Trp-213附近并逐渐形成聚集体, 从而诱导BSA由结构域ⅡA 开始逐渐展开. 此后, SDS呈正协同作用的特点与BSA 结合, v急剧增大. 当v约为302 时, SDS在BSA上的结合基本达到饱和, BSA的构象趋于稳定.