苯丙水溶胶的合成与性能研究(I) 聚合工艺和反应组分对聚合稳定性和胶体性能的影响

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶，考察了聚合工艺和反应组分（乳化剂，功能单体等）对苯丙乳液及其水溶胶反应稳定性和粒子大小及分布等胶体性能的影响。     

Synthesis and Crystal Structure of a New 2D Honeycomb-like Cadmium(II) Complex with Tripodal Ligand

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｔｈｅｐａｓｔｓｅｖｅｒａｌｙｅａｒｓ ,ｃｏｎｓｉｄｅｒａｂｌｅｐｒｏｇｒｅｓｓｈａｓｂｅｅｎａｃｈｉｅｖｅｄｉｎｃｏｎｔｒｏｌｌｉｎｇｔｈｅａｓｓｅｍｂｌｙｏｆｉｎｄｉｖｉｄｕａｌｂｕｉｌｄｉｎｇｂｌｏｃｋｓｉｎｔｏｓｔｒｕｃｔｕｒｅｓｗｉｔｈｓｐｅｃｉｆｉｃｔｏｐｏｌｏｇｉｅｓａｎｄｉｎｔｅｒｅｓｔｉｎｇｐｒｏｐｅｒｔｉｅｓｓｕｃｈａｓｍｏｌｅｃｕｌａｒｒｅｃｏｇｎｉｔｉｏｎ ,ｉｏｎｅｘｃｈａｎｇｅａｎｄｓｅｌｅｃｔｉｖｅｇｕｅｓｔｉｎｃｌｕｓｉｏｎ .1 3 Ｉｔｉｓ…     

Pt/Al2O3蜂窝状催化剂上NO选择性催化还原反应动力学研究

采用多次涂层和浸渍法制备了蜂窝状Pt/Al2O3催化剂，并在高空速和大气体流量条件下对无梯度循环式反应器和积分反应器上催化剂的活性进行了比较。同时采用循环式反应器对动力学数据进行了测定。根据Langmuir-Hinshelwood模型和实验结果，推测了NO-C3H6-O2体系的SCR反应机理，并导出了NO和C3H6反应速率的数学表达式。据此所计算的理论模拟值能够与实验值很好地吻合。实验结果表明，氧气浓度对NO和C3H6的反应速率有明显的影响，二者均随着氧浓度c (O2)的增加达到峰值，再增加氧气浓度时，C3H6的反应速率r(C3H6)保持不变，而NO反应速率r (NO)却下降，而且下降的程度随着温度的升高而加剧。同时，随着氧气浓度增加，r (NO)达到最大值时的温度亦随之下降。     

涂敷法制作质谱场电离发射丝的方法及性能研究

本文介绍一种新的质谱场电离发射丝的制备方法——涂敷法,并研究了其制备机理及影响发射丝灵敏度的因素。此外,还对涂敷法制作的发射丝及高温活化法制作的发射丝进行了各项性能对比试验。最后,介绍了涂敷发射丝的应用效果。     

Selenium Nanoparticles Prepared from Reverse Microemulsion Process

Selenium nanoparticles were prepared by a reverse microemulsion system. Sodium selenosulfate was used as selenium source. The results showed that hydrochloric acid concentration and reaction temperature had great influence on the morphology of products. The crystalline selenium nanowires and amorphous selenium nanorods were obtained in given condition.     

一种利用质谱信息进行结构特征鉴定的模式识别方法

本文提出了分段式离子系列谱编码方法,实验证明具有很好的结构表征能力。本程序主要是以模式识别技术为基础,实现了对未知物谱图的KNN分类,进而得到未知物的主要结构特征。这个程序应用于有机化合物的分类,取得了满意的结果。     

Density of supercritical CO_2-tetrahydrofuran binary mixture and the partial molar volume of the cosolvent

The densities of supercritical CO2-tetrahydrofuran (cosolvent) binary mixture weremeasured at temperatures in range of 308.15 to 323.15 K and at pressure up to 16.5 MPa.The concentrations of tetrahydrofuran were from 0 to 0.57 mol/L.The partial molar volume of tetrahydrofuran was calculated based on the relationship between the density of the mixture and the concentration of the cosolvent.It is observed that the partial molar volume of the cosolvent is negative and the absolute value decreases with increasing pressure and the concentration of the cosolvent.     

EFFECT OF MOLYBDENUM PROMOTER ON THE Cu-Co BASED CATALYSTS

The synthesis of mixed alcohols (C1-C5) from syngas has been studied at 6. 0 MPa over modified Co/CuLaZr catalysts. The molybdenum addition enhanced greatly the activity and the selectivity to alcohols. The improvement of hydrogenation capacity of the system via a reversible spillover effect of hydrogen could explain this effect, together with a great capacity of CO insertion, illustrated by the effect of C2H4 addition as a probe to syngas. Under our experimental conditions, a mixed alcohol production of 147.1g/kg. cat/h containing a proportion of 33. 1% of higher alcohols (C2 OH) was obtained with a selectivity to ROH of 52. 8%.     

聚合物驱蚊剂的慢释放研究

本文研究了丙烯酸酯共聚物载体对驱蚊剂N,N-二乙基间甲苯酰胺(DETA)慢释放行为的控制,探讨了单体配比、共聚物分子量以及DETA含量对释放速率的影响。结果表明。增加亲水性单体丙烯酸(AA),可提高DETA的释放速率;降低共聚物数均分子量,会减少DETA的释放量;剂型中DETA含量与释放量存在线性正比关系,但DETA的含量增加并不导致释放有效时间的线性增加。本文还就共聚物膜的透湿性和碱溶性作了研究,亲水性单体AA的增加同样导致透湿性和碱溶性的增加。制备的聚合物驱蚊剂经现场应用试验,表明具有良好的长效驱蚊特性。     

1,2,4-三苯基环戊二烯的合成及其烷基化反应

测定了颇哪醇在酸性条件下所得的脱水产物的分子结构.结果表明,在酸性条件下颇哪醇的脱水反应优于重排反应,由此合成了1,2,4-三苯基环戊二烯.该环戊二烯衍生物的烷基化反应,在通常条件下优先发生在碳环的第5位碳原子上,但在苛刻的剧烈反应条件下,进而发生在碳环的第3位碳原子上.讨论了脱水反应和烷基化反应的机理.