Phenomenology of composite colored weak bosons

In composite models of quarks, leptons and weak bosons whereW-constituents are colored objects, color octet partners ofW ^± andZ ⁰ are predicted. We study in detail the phenomenology of these particles. Independent of the specific model one expects a color octet isotriplet of vector bosons (W ₈ ^± ,Z ₈ ⁰ ) with mass in the range of 100–200 GeV, and a color octet isosinglet vector bosonV ₈ ⁰ with substantially larger mass, due to mixing with the gluon. Moreover, relatively light color octet excitations of the leptons appear, while the existence of “color exotic” partners of the quarks is model dependent. These particles decay mainly into a lepton (quark) and a gluon. We construct the couplings ofW ₈ ^± ,Z ₈ ⁰ andV ₈ ⁰ to ordinary and “color exotic” fermions. The signals of color octet weak bosons in low energy weak reactions are explored in detail. The production cross section ofW ₈ ^± (Z ₈ ⁰ ) in hadron-hadron collisions is calculated for \(0.54TeV \leqq \sqrt s \leqq 20TeV\) . Various decay modes of colored weak bosons are studied. The most prominent decay signatures ofW ₈ ^± andZ ₈ ⁰ are events of the type (l ^+-: charged lepton;j: hadronic jet; : missing transverse momentum). The present CERN \(p\bar p\) collider data on such events are discussed in the light ofW ₈ ^± andZ ₈ ⁰ decays. If colored weak bosons are not found with a mass less than ～250 GeV composite model building will be strongly restricted.     

Study of diffusion creep accompanying superplastic deformation of the alloy ZhS6KP

The development of diffusion creep (DC) accompanying superplastic deformation (SPD) of the highly doped nickel alloy ZhS6KP is studied based on an investigation of the redistribution of dispersed intragrain deposits of the phase of Ni₃(Al, Ti). Deposit-free zones (DFZ) are formed in the alloy, held at the temperature of SPD and accompanying deformation at the grain boundaries. The contribution of DC to the deformation was determined from a comparative analysis of the width of the DFZ in the deformed and undeformed parts of the samples for different grain sizes and rates of DC taking into account diffusion accommodation. It was established that for the optimum rate of SPD the upper limit of the contribution of DC to deformation for 2-m grains does not exceed 11%. It is concluded, based on the distribution of DFZ, that the effect of DC accompanying SPD is determined by diffusion fluxes, associated with the local concentration of stress accompanying the development of grain-boundary slipping.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 6, pp. 40–45, June, 1986.In conclusion, we thank Yu. M. Mishin for a useful discussion of the results.     

The magnetic hyperfine field of bromine in iron by NMR/ON

Nuclear magnetic resonance of⁸²Br oriented at low temperature in iron has been observed with a sample prepared by ion implantation atT<0.2 K. The asymmetric resonance signal can be decomposed in a broad background signal and a narrow line of FWHM=1.8 (4) MHz which can be attributed to⁸²Br in undisturbed substitutional sites of Fe. From the center frequency of this narrow line (B _ext=0)=201.86(13) MHz we derive the magnetic hyperfine field asB _hf(BrFe)=81.38(6) T. This value is considerably larger than the result of theoretical calculations.     

Optical frequency doubling of a single-mode dye laser in an external ring resonator

Optical frequency doubling of a single-mode cw Rhodamin 6G ring dye laser is performed with a thin angle-tuned LiIO₃ Brewster cut crystal in a stabilized passive ring resonator. A conversion efficiency of =5 mW uv/320 mW fundamental input power was achieved at =603 nm.     

A further test of the shape and anisotropy of the F---H2 interaction potential

A recently proposed anisotropic potential model for the interaction of a fluorine atom with a hydrogen molecule treated as a rigid rotor analysed by carrying out exact quantum calculations of elastic and rotationally inelastic differential cross sections for comparison with previoully reported F---H₂ and newly measured F---D₂ state selected measurements. The sensitivity of the cross sections to changes of the potential anisotropy and to isotopic substitution is examined. The results provide specific indications on the features of the best potential energy surface in terms of its average ‘size’ and its most likely anisotropy responsible for inelastic rotational excitations occuring at collision energies of about 85 meV.     

Cycloadditionsreaktionen von Organometall-Komplexen : XV. [2 + 31- und [2 + 1]-Cycloadditionsreaktionen von Carbonylrhodium- und Carbonylcobalt-Komplexen mit Nitriloxiden und Aziden. Die Kristall- und Molekülstruktur von C5H5(PPr3) (C6H5)

The reaction of C₅H₅Rh(CO)(PⁱPr₃) (1] which is prepared from C₅H₅Rh(CO)₂ and neat P¹Pr₃, with the nitriloxides 2-RC₆H₄CNO (R = H, Cl) leads to the formation of the metallaheterocycles C₅H₅(P¹Pr₃) ) (2, 3) in 90–95% yield. Compound 1 reacts with tosylazide to give the C,N-bound isocyanate complex C₅ H₅(PⁱPr₃)Rh(η²-TosN=C=O) (6). Analogously, on treatment of C₅Me₅Co(CO)(PMe₃) with phenylazide the phenylisocyanate derivative C₅Me₅(PMe₃)Co(η²-PhN=C=O) (7) is formed. Protonation of 7 with CF₃CO ₂H affords the non-ionic carbamoylcobalt complex C₅Me₅(PMe₃)Co[C(O)NHPh](O₂CCF₃) (8). The X-ray structural analysis of 2 reveals the presence of an almost planar heterocycle in which the two Rh-C distances differ by 0.045 Å     

R?ntgenspektrometrische Elementbestimmung in Abwasser: Probenvorbereitung und Matrixkorrekturverfahren

Zusammenfassung Für Elementbestimmungen in Abwasser wird ein Röntgenfluorescenzverfahren beschrieben. Zur Probenvorbereitung werden die Elemente durch Gefriertrocknung auf einem inerten Träger angereichert. Diese Anreicherung ist nicht selektiv und erfaßt praktisch alle in Abwasser gelösten und suspendierten Verunreinigungen. Für die Berechnung der Elementkonzentrationen aus den gemessenen Fluorescenzintensitäten wird ein Matrixkorrekturverfahren angegeben, welches dem unterschiedlichen Absorptionsverhalten der Probenmatrix Rechnung trägt. Die Massenabsorptionskoeffizienten werden durch Messung der diffus gestreuten Bremsstrahlung bzw. der Comptonstreustrahlung ermittelt. Die Selbstabsorption des zu bestimmenden Elementes wird rechnerisch berücksichtigt. Das Korrekturverfahren kann auf alle mit Röntgenfluorescenzanalyse bestimmbaren Elemente angewendet werden.

---

Determination of elements in waste water by x-ray fluorescence analysis: Sample preparation and matrix correction method

Summary For sample preparation the elements are enriched upon an inert carrier by freeze-drying. This enriching procedure is not selective and collects all dissolved and suspended contaminations from the waste water. In order to calculate the element concentrations from the measured fluorescence intensities a matrix correction method is given which considers the different absorption behaviour of the matrix. The mass absorption coefficients are obtained by measuring the scattered X-ray tube spectrum or a Compton scattered X-ray tube line, respectively. The self-absorption of the element to be determined is taken into account. The correction method is applicable to all elements detectable by X-ray fluorescence.

Herrn Dr. H. Wagner danken wir für das stete Interesse, die zahlreichen konstruktiven Diskussionen und die Hilfe beim Abfassen des Manuskripts.     

Fortran IV programs for the penultimate copolymerization model

Three programs have been written for calculations involving use of the penultimate copolymerization model. The first computes the penultimate reactivity ratios from composition-conversion data, without constraints, at any conversion. A nonlinear leastsquares technique using Marquardt's algorithm is employed. The second program computes the four optimum starting monomer feed ratios, M₁⁰/M₂⁰ which should be used by the experimenter from the penultimate reactivity ratios. These optimum feed ratios are obtained by choosing the conditions necessary to minimize the determinant of the variance-covariance matrix. The input for the first program includes estimates of known values of the penultimate reactivity ratios. By using these two programs sequentially the experimenter has an optimized experimental approach toward evaluating penultimate reactivity ratios at any conversion. Finally, a program has been provided to calculate composition–conversion data, given penultimate reactivity ratios.     

Quantitative studies on the peroxidation of human low-density lipoprotein initiated by superoxide and by charged and neutral alkylperoxyl radicals.

Rates of peroxidation of human LDL and rates of consumption of the LDL's alpha-tocopherol (TocH) have been measured at 37 degrees C. Peroxidation was initiated by radicals generated in the aerated aqueous phase at known rates by thermal decomposition of appropriate precursors: superoxide (O2(*-)/HOO(*)) from a hyponitrite and alkylperoxyls (ROO(*), two positively charged, one negatively charged and one neutral) from azo compounds. The efficiencies of escape from the solvent cage of the geminate pair of neutral carbon-centered radicals was found to be 0.1, but it was 0.5 for the three charged radicals, a result attributed to radical/radical Coulombic repulsion within the cage. All four alkylperoxyls initiated and terminated tocopherol-mediated peroxidation (TMP) with about equal efficiency and essentially all of these radicals that were generated were consumed in these two reactions. TMP is a radical chain process, and when initiated by the alkylperoxyls, the rate of LDL peroxidation was faster in the early stages while TocH was present than later, after all of this "antioxidant" had been consumed. In contrast, only about 3-4% of the generated superoxide radicals reacted in any measurable fashion with TocH-containing LDL at pH's from 7.6 to 6.5 and peroxidation was much slower than with a similar rate of generation of alkylperoxyls. After all the TocH had been consumed, LDL peroxidation was negligible at pH 7.6 and 7.4, but at pH 6.8 and 6.5, the peroxidation rates showed a large increase over the rates while the TocH had been present. That is, endogenous TocH behaves as an antioxidant in LDL subjected to attack by the physiologically relevant superoxide radical, whereas TocH behaves as a prooxidant in LDL subjected to attack by the probably far less physiologically important alkylperoxyls. Rates of LDL peroxidation initiated by superoxide increased as the pH was decreased, and the results are consistent with the initiation of peroxidation of fresh LDL occurring via H-atom abstraction from TocH by HOO(*) to form the Toc(*) radical and termination by reaction of O2(*-) with Toc(*), a process that occurs partly by addition leading to TocH consumption and partly by electron plus proton transfer leading to the regeneration of TocH.     

IR double resonance experiments with size selected clusters for identification of isomers

Infrared photodissociation spectra of (CH₃OH) _n clusters (n=2, 3 and 6) and the mixed dimer C₂H₄ · CH₃COCH₃ are presented. The clusters are generated in a supersonic jet expansion and size selected by scattering from a helium atomic beam combined with mass spectrometric detection. Continuous CO₂-lasers are used to vibrationally excite the molecules in the cluster leading to rapid dissociation of the complex. Various dissociation peaks that are found in single-laser dissociation spectra can be assigned unambigously in a pump-probe experiment with two lasers to either different isomers (acetone-ethene dimer) or splitted lines of one isomer (methanol hexamer). For size distributions, the method is able to select contributions of single masses which is demonstrated for mixtures of methanol dimers and trimers.