Analytical application of the poly(1H-1,2,4-triazole-3-thiol) modified gold electrode for high-sensitive voltammetric determination of catechol in tap and lake water samples

ABSTRACT

In this work, a simple, sensitive and rapid method for the determination of trace amounts of catechol (CT) in aqueous media has been suggested. For this purpose, poly(1H-1,2,4-triazole-3-thiol) film was electrochemically deposited successfully at the gold electrode (Au/T3T). The electrochemical behaviour of CT was studied on the Au/T3T electrode by the cyclic voltammetry and differential pulse voltammetry techniques. The anodic peak current value and the concentration of CT showed a good linear relationship in the range of 0.015–2.8 µM. The limit of detection was found as 1.88 nM (S/N = 3). Besides, the reproducibility, repeatability, stability and interference measurements were also assayed. This sensor was applied successfully for the detection of CT in synthetic and real samples.     

Solid-phase extraction and preconcentration of trace Pb(II) from water samples with folic acid modified silica gel

A chelating matrix prepared by immobilising folic acid on silica gel-bound amine phase was used as a new solid-phase extractant. This sorbent has been developed only for preconcentration of trace Pb(II) prior to determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Experimental conditions were investigated by batch and column procedures. The optimum pH value for the separation of Pb(II) on the new sorbent was 4.0. The adsorbed Pb(II) was quantitatively eluted by 2.0?cm³ of 0.5?mol?dm^?3 of HCl. Common coexisting ions did not interfere with the separation and determination of Pb(II). The maximum static adsorption capacity of the sorbent under optimum conditions was found to be 69.23?mg?g^?1 for Pb(II). The detection limit of the method defined by International Union of Pure and Applied Chemistry was 0.28?ng?cm^?3. The relative standard deviation (RSD) of the method was lower than 2.0% (n?=?8). The developed method has been validated by analysing certified reference materials and successfully applied to the determination of Pb(II) in water samples with satisfactory results.     

New formal (3+3) cycloaddition of enaminones for forming tetracyclic indolo[2,3-b]quinolines under microwave irradiation

Concise and efficient base-promoted domino formal (3+3) cycloaddition has been established for the formation of tetracyclic indolo[2,3-b]quinoline derivatives under microwave heating. The present methodology shows attractive properties, such as the maximum efficiency of a process, short reaction periods, and operational simplicity, and it can avoid time-consuming and costly syntheses, tedious work-up and isolation of intermediate. This chemistry provides a facile and promising synthetic strategy to construction of tetracyclic indolo[2,3-b]quinoline skeleton.     

Dopamine derivatives from the insect Polyrhachis dives as inhibitors of ROCK1/2 and stimulators of neural stem cell proliferation

Polyrhachis dives is consumed as an insect food in some regions of China. In this study, new dopamine derivatives, (+)-polyrhadopamine A (1a) and (−)-polyrhadopamine A (1b), (+)-polyrhadopamine B (2a) and (−)-polyrhadopamine B (2b), and polyrhadopamines C–E (3–5), were isolated from this species. The structures and stereochemistry of these substances were assigned by using spectroscopic and computational methods. Compounds 1a, 1b, 2a, and 2b are dimeric N-acetyldopamine derivatives, 3 is a dopamine analog containing an unusual sulfone group, and 4 and 5 possess a rare benzo[d]thiazole moiety. The functions of these substances as ROCK1/2 inhibitors, neural stem cell (NSCs) proliferation stimulators, immunosuppressive, and anti-inflammatory agents were determined.     

Biological evaluation of 2-methylpyrimidine derivatives as active pan Bcr-Abl inhibitors

We designed a series of 2-methylpyrimidine derivatives as new BCR-ABL inhibitors using scaffold-hopping strategy.These synthetic compounds exhibited significant inhibition against a broad spectrum of Bcr-Abl mutants including the gatekeeper T315I mutant.Compound 7u showed very potent kinase inhibitory activities against Bcr-Abl WT,Bcr-Abl E255K,Bcr-Abl Q252H,Bcr-Abl G250E and Bcr-Abl T315I,with IC50 values of 0.13 nM,0.17 nM,0.24 nM,0.19 nM and 0.65μM,respectively.This compound also displayed anti-proliferation activity against K562 cell line with an IC50 value of 1.1 nM,thus representing a new lead for further optimization.     

The Shackling Effect in Cyclic Azobenzene Liquid Crystal

We demonstrate here a novel method for the design of liquid crystals (LCs) via the cyclization of mesogens by flexible chains. For two azobenzene-4,4′-dicarboxylate derivatives, the cyclic dimer, cyclic bis(tetraethylene glycol azobenzene-4,4′-dicarboxylate) (CBTAD), shows LC properties with smectic A phase, while its linear counterpart, bis(2-(2′-hydroxyethyloxy)ethyl azobenzene-4,4′-dicarboxylate (BHAD), has no LC phase. The difference is ascribed to the shackling effect from the cyclic topology, which leads to the much smaller entropy change during phase transitions and increases the isotropic temperature greatly for cyclics. In addition, the trans-to-cis isomerization of azobenzene groups under UV-light is also limited in CBTAD. With the reversible isomerization of azobenzene groups, CBTAD showed interesting isothermal phase transition behaviors, where the LC phase disappeared upon photoirradiation of 365 nm UV-light, and recovered when the UV-light was off. Combined with the smectic LC nature, a novel UV-light tuned visible light regulator was designed, by simply placing CBTAD in two glass plates. The scattered phase of smectic LC was utilized as the “OFF” state for light passage, while the UV-light induced isotropic phase was utilized as the “ON” state. The shackling effect outlined here should be applicable for the design of cyclic LC oligomers/polymers with special properties.

     

Study on backward-facing step flow and heat transfer characteristics of hybrid nanofluids

Journal of Thermal Analysis and Calorimetry - As high heat dissipation has increasingly become the primary factor restricting the capability of electronic elements, and the high temperature of the...     

Sensitive,Accurate and Selective Determination of Cd(II) Using Anodic Stripping Voltammetry with in-situ Hg-Bi Film Modified Pencil Graphite Electrode After Magnetic Dispersive Solid Phase Microextraction

This paper describes a novel approach to detect Cd(II) using the combination of the differential pulse anodic stripping voltammetry and magnetic nanoparticle based dispersive solid phase microextraction as an efficient, green and accurate method. Currents of Cd(II) increased linearly in the range from 75 to 2000 ng L⁻¹ Cd(II) with a detection limit of 21.6 ng L⁻¹. The RSD values of 2.6 and 6.0 % for 1.00 and 0.10 μg L⁻¹ respectively showed that proposed method has an acceptable repeatability. Recovery values between 92.3 and 98.6 % showed that this approach can be successfully used for determination of Cd(II) in water samples.     

Stabilization of continuum generation from normally dispersive nonlinear optical fibers for a tunable broad bandwidth source for optical coherence tomography

Continuum generation from normally dispersive ultrahigh-numerical-aperture fibers deteriorates in relatively short times, limiting its application as a practical optical source for high-resolution optical coherence tomography. We find that reversible light-induced structural modification of fiber optic materials, rather than permanent optical damage, is responsible for this deterioration. By examining how the optical properties of corresponding light-induced waveguides depend on pumping wavelength, we isolate a waveguide that is beneficial for stable continuum generation. The performance deterioration due to the formation of other waveguides can be reversed by overwriting them with this particular waveguide.     

On the Distribution of Prime-Triplets

A new approach to the research of the distribution of prime-triplets is developed．It differs from the usual methods（involving the sieve method）for this kind of research,and basing on Chebyshev inequality and on the computation of average concentration of all the related subset．It leads to the proofs of following Lemma ２and Theorem２（Lemma１and Theorem１in Reference１had been proved by means of this new method）： 　Lemma２　Among all the prime-triplet-subsets there exists at least one such subset which is an infinite set． 　Theorem２　All the prime-triplet-subsets or infinitely many such subsets are infinite sets． Formulas for estimating the amount of such infinite sets are provided in this paper．