BEHAVIOR OF CHO CELLS ON MODIFIED POLYPROPYLENE BY LOW TEMPERATURE AMMONIA PLASMA

1. INTRODUCTION Bioreactors using membranes as substrates of cell cultures have become widely used for hybrid liver support systems [1]. For enhancing and prolonging the metabolism of the bioreactors, cytocompatible membranes are necessary because the cell culture is closely affected by the substrate surface. Surface factors considered to be important in cell culture are the concentration of ionic groups, the nature of polar and non-polar groups and the hydrophilic-hydrophobic balance [2].…     

Effective Factors on Forming Precision in Patternless Casting Manufacturing Technique

The patternless casting manufacturing (PCM) technique, which adopts a new concept of double scanning method, combines the principle of discreteness and deposition with resin-bonded sand technique. This paper is to evaluate the dimensional accuracy of sand mould on PCM. The two important factors-the liquid penetration rule in the space of particles and the shape and dimension of the agglomeration unit body, which influence the process parameters such as scanning speed, layer thickness, liquid flux on dimension accuracy, and surface qualities, were investigated systematically, thus the theoretical basis for these parameters was provided. Experiments on rapid manufacturing of sand mould were carried out, and the results of the free penetration and the constraint penetration well verified the relationship of the two factors and the process parameters.     

数学思想方法提高学生数学解题能力的教学研究

通过教学实验的方法,对数学思想方法与学生数学解题能力的整合作了初步的探讨,提出了在教学中如何更好地运用数学思想方法来提高学生解题能力的原则。     

论高等职业技术教育中的数学素质教育

从更新教学理念,改革教学内容,构建新的高职数学体系,改革教学方法等多个角度论证了数学素质教育。     

试论元认知、数学学习策略及其关系

首先阐述了对元认知和数学学习策略两个概念的理解,然后探讨了两者之间的关系。数学学习策略是元认知的重要组成部分,两者相互影响、彼此促进、协调发展。     

强反射复杂表面随机缺陷检测照明系统分析

分析了采用CCD光电检测法对强反射复杂表面随机缺陷进行检测时的光学照明问题。给出了缺陷显现力的具体定义。对比了平行光和均匀散射光对消除强反射光的不同作用及对不同表面缺陷的显现力。分析了使用均匀散射光作为光源时，工件表面照度对成像质量的影响。给出了在上述条件下光照系统设计的基本原则。     

线性啁啾光纤光栅的数值分析

本文利用耦合模方程对线性啾光纤光栅的反射谱进行了计算,并讨论了方程中各参数对计算结果的影响.     

THE UPWIND FINITE ELEMENT SCHEME AND MAXIMUM PRINCIPLE FOR NONLINEAR CONVECTION-DIFFUSION PROBLEM

In this paper, a kind of partial upwind finite element scheme is studied for twodimensional nonlinear convection-diffusion problem. Nonlinear convection term approximated by partial upwind finite element method considered over a mesh dual to the triangular grid, whereas the nonlinear diffusion term approximated by Galerkin method. A linearized partial upwind finite element scheme and a higher order accuracy scheme are constructed respectively. It is shown that the numerical solutions of these schemes preserve discrete maximum principle. The convergence and error estimate are also given for both schemes under some assumptions. The numerical results show that these partial upwind finite element scheme are feasible and accurate.     

镱的原子吸收分析进展

本文对近些年来用电热原子吸收和火焰原子吸收测定镱时,为提高镱的灵敏度而采用的各种方法进行总结评述。     

Deoxygenation of methyl laurate to hydrocarbons on silica-supported Ni-Mo phosphides: Effect of calcination temperatures of precursor

SiO2-supported Ni-Mo bimetallic phosphides were prepared by temperature-programmed reduction(TPR) method from the phosphate precursors calcined at different temperatures. Their properties were characterized by means of ultraviolet-visible diffuse reflectance spectroscopy(UV-Vis DRS), H2temperature-programmed reduction(H2-TPR), X-ray diffraction(XRD), transmission electron microscopy(TEM), CO chemisorption, H2 and NH3temperature-programmed desorptions(H2-TPD and NH3-TPD). Their catalytic performances for the deoxygenation of methyl laurate were tested in a fixed-bed reactor. When the precursors were calcined at 400 and 500?C, respectively, Ni Mo P2 phase could be formed apart from Ni2 P and Mo P phases in the prepared C400 and C500 catalysts. However, when the precursors were calcined at600, 700 and 800°C, respectively, only Ni2 P and Mo P phases could be detected in the prepared C600, C700 and C800 catalysts. Also, in C400, C500 and C600 catalysts, Mo atoms were found to be entered in the lattice of Ni2 P phase, but the entering extent became less with the increase of calcination temperature. As the calcination temperature of the precursor increased, the interaction between Ni and Mo in the prepared catalysts decreased, and the phosphide crystallite size tended to increase, subsequently leading to the decrease in the surface metal site density and the acid amount. C600 catalyst showed the highest activity among the tested ones for the deoxygenation of methyl laurate. As the calcination temperature of the precursor increased, the selectivity to C12 hydrocarbons decreased while the selectivity to C11 hydrocarbons tended to increase. This can be mainly attributed to the decreased Ni-Mo interaction and the increased phosphide particle size. In sum, the structure and performance of Ni-Mo bimetallic phosphide catalyst can be tuned by the calcination temperature of precursor.