Nickel‐Catalyzed Barton Decarboxylation and Giese Reactions: A Practical Take on Classic Transforms

Two named reactions of fundamental importance and paramount utility in organic synthesis have been reinvestigated, the Barton decarboxylation and Giese radical conjugate addition. N ‐hydroxyphthalimide (NHPI) based redox‐active esters were found to be convenient starting materials for simple, thermal, Ni‐catalyzed radical formation and subsequent trapping with either a hydrogen atom source (PhSiH₃) or an electron‐deficient olefin. These reactions feature operational simplicity, inexpensive reagents, and enhanced scope as evidenced by examples in the realm of peptide chemistry.     

Implications of Nitrogen Doping on Geometrical and Electronic Structure of the Fullerene Dimers

Because of its unsaturated bonds, C₆₀ is susceptible to polymerize into dimers. The implications of nitrogen doping on the geometrical and electronic structure of C₆₀ dimers have been ambiguous for years. A quarter‐century after the discovery of azafullerene dimer (C₅₉N)₂, we reported its single crystallographic structure in 2019. Herein, the unambiguous crystal structure information of (C₅₉N)₂ is elucidated specifically, revealing that the inter‐cage C—C single bond length of (C₅₉N)₂ is comparable with that of an ordinary C(sp³)‐C(sp³) single bond, and that the most stable conformer of (C₅₉N)₂ is gauche‐conformer with a dihedral angle of 66°. To amend the structural deviations, geometrical structure of (C₅₉N)₂ is optimized by a B3LYP‐D3BJ function, which is proved to be more consistent with its single crystal structure than those by the commonly used B3LYP function. Moreover, the calculation method is also suitable for other representative fullerene dimers, such as (C₆₀)₂ and its divalent anion. Additionally, the dissociation of (C₅₉N)₂ at 473 K under mass spectrometric conditions suggests the inter‐cage C—C bond is relatively weaker than an ordinary C—C single bond, which can be explained by the interaction energies of inter‐cages.     

Research Progress of Lithium Plating on Graphite Anode in Lithium‐Ion Batteries

Lithium plating on graphite anode is triggered by harsh conditions of fast charge and low temperature, which significantly accelerates SOH (state of health) degradation and may cause safety issues of lithium ion batteries (LIBs). This paper has reviewed recent research progress of lithium plating on graphite anode. Firstly, we summarize the forming mechanisms of Li plating with corresponding influence factors, the detecting methods and hazard of Li plating. Then, approaches to suppress Li plating are discussed, including anode surface modification, electrolyte composition optimization and development of optimal charge strategies. Finally, we conclude and propose the remaining challenges and prospects in terms of mechanism research, detecting approaches, and suppressing methods of Li plating. This review highlights the development of Li plating research and plays a guiding rule of further study on Li plating in LIBs.     

电泳法制备的致密氧化锡薄膜及其在高稳定性钙钛矿太阳能电池中的应用

在平面型钙钛矿太阳能电池中常采用SnO₂作为电子传输层材料,相应的SnO₂薄膜常采用溶液旋涂法制备。但是由于前驱液中的纳米颗粒可能会发生部分团聚、基底和溶液难以完全避免灰尘等杂质颗粒混入,且最佳的SnO₂电子传输层的厚度通常仅有约20 nm,所以这种方法制备的电子传输层难以保证严格致密和无纳米针孔。在本工作中,我们报道了一种电泳沉积制备致密SnO₂薄膜的方法,并用其有效地提高了钙钛矿太阳能电池的光电转换效率和工况稳定性。通过电泳法,表面带负电荷的SnO₂纳米颗粒在电场的作用下沉积到氧化铟锡(ITO)阳极表面,这种方法得到的薄膜比旋涂法制备的更为致密。将其应用于n-i-p结构的钙钛矿太阳能电池中,能够使得暗电流降低并抑制载流子的非辐射复合,从而提高电池的短路电流和开路电压,进而实现更高的光电转换效率(从18.17%提高到19.52%),且能消除迟滞效应。更重要的是,长期工况稳定性测试表明基于电泳-旋涂法制备的器件在1个太阳的光照下、最大功率点处连续工作960 h后,仍然能够保持71%的初始效率;然而基于旋涂法制备的器件在工作100 h后即降低到初始效率的70%。本工作提供了一种全新的SnO₂电子传输层的制备方法,显著地提高了器件性能和工况稳定性,后续有望应用于制备大面积器件和电池模组。     

SCN掺杂提高CsPbI3胶体量子点的稳定性和光探测性能

无机卤化物钙钛矿CsPbI₃胶体量子点因其优越的光电性能在光伏和发光器件领域中表现出极大的发展前景。然而,CsPbI₃较差的稳定性阻碍了实际应用。为此,我们采用SCN?离子掺杂CsPbI₃(SCN-CsPbI₃)量子点用于提高量子点的光学性能和稳定性。研究表明,SCN?离子掺杂不仅减少了量子点缺陷、改善了光学性能,还提高了Pb-X键能、量子点结晶质量以及钙钛矿结构稳定性。结果表明,SCN-CsPbI₃量子点的荧光量子产率(PLQY)超过90%,远高于未掺杂原始样品(PLQY为68%)。高的荧光量子产率表明量子点具有较低的缺陷态密度,这归咎于缺陷的减少。空间限制电荷和时间分辨荧光光谱等研究也证实SCN?离子掺杂减少了量子点的缺陷。此外,SCN-CsPbI₃量子点展现出很好的抗水性能,其荧光强度在水中浸泡4 h后依然保持85%的初始值。而未掺杂原始样品的荧光性能很快消失,这是因为水诱导其相变。基于SCN-CsPbI₃量子点的光电探测器表现出宽波域响应(400–700 nm),高的响应率(90 mA·W^?1)和超过1011 Jones的探测度,远高于未掺杂原始量子点探测器的性能(响应率为60 mA·W^?1和探测度为1010 Jones)。     

限域化学：碳基功能材料从基础研究到应用

限域化学研究的是对象在纳米尺度限域空间内的化学行为。限域空间内的化学环境不同于常规本体溶液,因而会出现许多奇特的现象,如反应选择性增强、活性增加、稳定性提高。本文结合笔者课题组近年来的工作,对限域化学领域碳基功能材料的限域策略,包括限域界面诱导、限域化学组装印刷及三维多孔受限体系作简要介绍,并阐述了其在催化、储能方面的应用。最后提出了限域化学未来发展面临的主要挑战,期望能为此领域研究提供参考。     

Controllable Preparation of Branched Polyolefins with Various Microstructural Units via Chain-walking Ethylene and Pentene Polymerizations

Chinese Journal of Polymer Science - Branched polyolefins with controllable topology structures were generated from the chain-walking (co)polymerizations of ethylene, 1-pentene (1P) and 2-pentene...     

Plasmon-Enhanced Electrochemiluminescence at the Single-Nanoparticle Level

Plasmon-enhanced electrochemiluminescence (ECL) at the single-nanoparticle (NP) level was investigated by ECL microscopy. The Au NPs were assembled into an ordered array, providing a high-throughput platform that can easily locate each NP in sequential characterizations. A strong dependence of ECL intensity on Au NP configurations was observed. We demonstrate for the first time that at the single-particle level, the ECL of Ru(bpy)₃²⁺-TPrA was majorly quenched by small Au NPs (<40 nm), while enhanced by large Au ones (>80 nm) due to the localized surface plasmon resonance (LSPR). Notably, the ECL intensity was further increased by the coupling effect of neighboring Au NPs. Finite Difference Time Domain (FDTD) simulations conformed well with the experimental results. This plasmon enhanced ECL microscopy for arrayed single NPs provides a reliable tool for screening electrocatalytic activity at a single particle.     

Photoinduced Reaction of α-Bromoacetophenone with Thiosulfonate: Synthesis of β-Keto Thiosulfone

A photoinduced synthesis of β-keto thiosulfone/β-keto selenosulfone by the reaction of α-bromoacetophenone with thiosulfonate/selenosulfonate under metal-free and visible light irradiation conditions is developed. Two C−S bonds or one C−S bond and one C−Se bond were constructed simultaneously.     

A Strong-Acid-Resistant [Th6] Cluster-Based Framework for Effectively and Size-Selectively Catalyzing Reductive Amination of Aldehydes with N,N-Dimethylformamide

Utilization of N,N-dimethylformamide (DMF) as an amine source and reductant for synthesizing tertiary amines is a promising way to replace the substrates formaldehyde and dimethylamine, and it is desirable to seek porous acid-resistant catalysts for heterogeneous catalysis of this reaction. Herein, a robust metal–organic framework (MOF) {[Th₆O₄(OH)₄(H₂O)₆(BCP)₃]⋅10 DMF}_n ( 1 ) containing stacked nanocages with a diameter of 1.55 nm was constructed. Compound 1 can maintain its single-crystal structure even kept in air at 400 °C for 3 h, and in DMF or water at 200 °C for 7 days. Density functional theory (DFT) calculations suggested that the high interaction energy between the [Th₆O₄(OH)₄(H₂O)₆]¹²⁺ clusters and ligands was responsible for the excellent stability of 1 . Catalytic investigations revealed that 1 can effectively and size-selectively catalyze the reductive amination of aldehydes with DMF, and it can be reused at least five times without obvious loss in catalytic activity.