一些稀疏图的强边染色（英文）

图G的强边染色是指对图G进行正常边染色使得任意长度为3的路的三条边染不同的颜色.图G的强边色数,记为χ’_s(G),是使得图G是强k边着色的最小正整数kk.2015年,Zang [arXiv:1510.00785]证明了:最大度△(G)=5的图G,χ’_s(G)≤37.本文证明了:最大度△(G)=5且最大平均度小于8/3(或者14/5)的图G,χ’_s(G)≤13 (或者14).另外,本文证明了:最大度△(G)≥3的不含K_2,3-图子式的图G,χ’_s(G)≤4△(G)-6,这个界是紧的.     

光伏模组积灰与阴影特性分析及识别方法

针对光伏模组积灰与阴影特性识别问题,详细分析了积灰和阴影的光伏特性曲线差异,揭示了阴影光伏曲线的拐点时变特性。提出由特性曲线的拐点数量及电流电压特性条件共同构成训练模型的输入特征量,基于CatBoost算法训练积灰和阴影识别模型。最后,利用光伏模组实测数据对CatBoost算法、ID3和GA-BP算法训练出的识别模型进行性能分析和对比测试,结果表明基于CatBoost训练出的识别模型输入量区分性强、诊断精度高,极具工程应用价值。     

提高注射法导入外源基因棉铃成铃率的技术研究

对采用注射法导入外源基因的棉铃,在激素种类、不同生态条件、结铃部位、结铃性、整枝方式等方面进行分析,探讨了导入棉铃落铃机理和提高导入棉铃成铃率的技术途径。     

初生空化数的计算模型

从“气核惯性失稳导致空化”这一观点出发,提出了应用于数值模拟的初生空化判别标准及其数学模型,采用Ｍｏｎｔｅ－Ｃａｒｌｏ方法模拟空化现象中的各种随机因素,在可靠度的意义下将气核空化初生与流场空化初生联系起来．以黄河小浪底工程消能泄洪洞为例,对三级串联孔板的初生空化数作了计算．     

铽与苯乙酮酸、2,2''''-联吡啶、1,10-菲口罗啉、三苯基氧膦铽三元配合物的合成、结构表征及荧光性能的研究

以硝酸铽、苯乙酮酸（HL）, 2, 2＇-联吡啶（dipy）、 1, 10-菲啰啉（phen）和三苯基氧膦（TPPO）合成了TbL3dipy（H2O）2, TbL3phen（H2O）2和TbL2（TPPO）2NO3 3种新型固态配合物. 用元素分析、电导率、红外光谱和核磁共振谱对其进行了表征, 确定了配合物的组成. IR表明, 配合物中羧酸根可能以单齿方式配位. 1HNMR显示, 苯乙酮酸根配位后苯环上5个氢原子的化学位移移向高场. 室温下测定了配合物的荧光激发光谱, TbL3dipy（H2O）2, TbL3phen（H2O）2和TbL2（TPPO）2NO3最佳激发波长分别为361.0, 359.0和367.0 nm;分别以最佳激发波长测定了配合物的发射光谱, 配合物TbL3dipy（H2O）2, TbL3phen（H2O）2 和TbL2（TPPO）2NO3显示Tb3＋离子的特征发射光谱, TbL3dipy（H2O）2和TbL3phen（H2O）2均产生四条谱带, 分别归属于^5D4-^7Fj（j= 6, 5,4,3）能级跃迁（TbL3dipy（H2O）2： 489.0, 545.0, 584.0, 620.0 nm;TbL3phen（H2O）2： 490.0, 544.0, 583.0, 620.0 nm）;但在相同测定条件下, TbL2（TPPO）2NO3仅显示5D4-7F5（544.0 nm）能级跃迁光谱. 3种配合物中TbL3dipy（H2O）2发光强度最高.     

Nafion/Poly(sodium 4‐styrenesulfonate) Mixed Coating Modified Bismuth Film Electrode for the Determination of Trace Metals by Anodic Stripping Voltammetry

To improve the reproducibility, stability, and sensitivity of bismuth film electrode (BiFE), we studied the performances of a mixed coating of two cation‐exchange polymers, Nafion (NA) and poly(sodium 4‐styrenesulfonate) (PSS), modified glassy carbon BiFE (GC/NA‐PSS/BiFE). The characteristics of GC/NA‐PSS/BiFE were investigated by scanning electron microscopy and cyclic voltammetry. Various parameters were studied in terms of their effect on the anodic stripping voltammetry (ASV) signals. Under optimized conditions, the limits of detection were 71 ng L^?1 for Cd(II) and 93 ng L^?1 for Pb(II) with a 10 min preconcentration. The results exhibited that GC/NA‐PSS/BiFE can be a reproducible and robust tool for monitor of trace metals by ASV rapidly and environmentally friendly, even in the presence of surface‐active compounds.     

Studies on the atom transfer radical polymerization of a maleimide AB* monomer and modification of the halogen end groups

The atom transfer radical polymerization (ATRP) of an AB* monomer, N-(4-α-bromobutyryloxy phenyl)maleimide (BBPMI), was conducted using the complex of CuBr/2,2′-bipyridine as catalyst. The study of kinetics of polymerization and the growth behavior of macromolecules show that the polymerization proceeds rapidly in first 1 h and then slows down. The decrease in the rate of polymerization is ascribed to the poor reactivity of maleimide radicals from A* to initiate the polymerization of maleimide double bonds. The molecular weight of the resulting polymer also increases with the dosage of catalyst. The coincidence of molecular weight determined by hydrogen proton nuclear magnetic resonance spectroscopy (¹H NMR) and gel permeation chromatography (GPC) proves that the resulting polymer is of linear structure, which is further verified by ¹³C NMR measurement and high performance liquid chromatography (HPLC) analysis of the hydrolysate of the resulting polymer. The stabilization modification of the halogen end groups of the resulting polymer by free-radical chain transfer reaction was attempted under ATRP condition. Isopropyl benzene was employed as the chain transfer agent. Indeed, the modified polymer with carbon-bromine bonds conversion of 40.7% shows enhanced thermal stability. The initial weight loss temperature has been increased from 193 to 243 °C. On the other hand, the atom transfer radical copolymerization of BBPMI with styrene resulted in the formation of hyperbranched polymer.     

Evaluation of the VIDAS Listeria (LIS) immunoassay for the detection of Listeria in foods using demi-Fraser and Fraser enrichment broths, as modification of AOAC Official Method 999.06 (AOAC Official Method 2004.06)

A multilaboratory study was conducted to compare the VIDAS LIS immunoassay with the standard cultural methods for the detection of Listeria in foods using an enrichment modification of AOAC Official Method 999.06. The modified enrichment protocol was implemented to harmonize the VIDAS LIS assay with the VIDAS LMO2 assay. Five food types--brie cheese, vanilla ice cream, frozen green beans, frozen raw tilapia fish, and cooked roast beef--at 3 inoculation levels, were analyzed by each method. A total of 15 laboratories representing government and industry participated. In this study, 1206 test portions were tested, of which 1170 were used in the statistical analysis. There were 433 positive by the VIDAS LIS assay and 396 positive by the standard culture methods. A Chi-square analysis of each of the 5 food types, at the 3 inoculation levels tested, was performed. The resulting average Chi square analysis, 0.42, indicated that, overall, there are no statistical differences between the VIDAS LIS assay and the standard methods at the 5% level of significance.     

培养基质若干因子对香蕉试管苗生长的影响

采用正交设计研究了培养基中蔗糖浓度、6—苄氨基嘌吟浓度、卡拉胶浓度对不同香蕉品种的芽分化率和生长量的影响,筛选出香蕉试管苗长势良好、分芽率高、芽粗壮的培养基配方:MS+35g·L~(-1)蔗糖+3g·L~(-1)卡拉胶+1mg·L~(-1)6—BA.香蕉不同品种的分芽率差异不显著,但分芽率与芽生长量密切相关.     

铝渣灰脱硫剂对提高LF炉脱硫效果的影响

叙述了用铝渣灰脱硫剂提高脱硫效果缩短ＬＦ炉处理的时间的试验，着重分析了此脱硫剂的脱硫效果和影响因素，该试验的工艺要点是：控制好顶渣成分，提前造渣，钢液脱氧良好，增加吹氩强度，结果表明，用含铝渣灰的脱硫剂处理钢水，当每ｔ钢加入量为１５～２０ｋｇ时，ＬＦ炉处理时间平均缩短１０ｍｉｎ，平均脱硫率提高１６％。